Question about 1996 Toyota Tacoma

1 Answer

Replace computer box

Replacing the computer box

Posted by on

  • yadayada
    yadayada Nov 06, 2012

    Why do you want to replace this? You mean the PCM right?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Master
  • 14,553 Answers

I would Google to begin with the year and model with "replace" and also look on You Tube or one of the many Toyota forums to see if video or detailed instructions exist from someone who has already done this--recently had a bad hinge pin on door of a vehicle--got everything from remove entire door, replace entire hinge to someone with step by step instructions with photos--20 min job and 2 4 dollar parts.

You can save time and mistakes if you research enough. Key words are essential when you do this.

Posted on Nov 06, 2012

  • yadayada
    yadayada Nov 06, 2012

    PCM failure rates are about 2%, so keep that in mind. FYI

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford focus computer box part no. 7U71- 12A - 650 - EA. Nothing available at the local scrap yards,,,


What year is your focus ? Replacing a PCM - engine computer ,it will need to go to the dealer for programming ! You can't just replace a module from one vehicle to an other without programming PATS keys , VIN # an some other thing's it won't start !

Aug 21, 2016 | Ford Cars & Trucks

1 Answer

Where is the computer or brain box on my 1991 GMC Sonoma 4.3?


Should be under the passenger side dash.Silver square box with3-4 plugs.

Sep 07, 2015 | 1991 GMC Sonoma

1 Answer

If I replace my alternator with replacement one, did will affect to the computer box


it should'nt have any affect on the computer box providing it is the correct alternator for your vehicle & you don't short circuit any wiring while you are fitting it.....hope this helps.....cheers

Jun 15, 2011 | Mazda 323 Cars & Trucks

2 Answers

I need to replace a computer brain box for my 2001 Saturn L series Wagon. I'm thinking it is located behind the glove box on the passenger side but how do I get to it?


The ecm is buried under the passenger side windshield cowling. The bcm sits on top of the glove box. Your 4cyl engine uses a timing chain that may have suffered from lack of lubrication due to poor oiling controls. Although you're describing a symptom, ecm's rarely fail ($$$), as your description may have everything to do with the bcm and the factory security system; starting, running then stopping. Have you reviewed your owner's manual for resetting the security system?

Jumping on ecm replacement won't be as easy as you may think as there's a factory security feature that forces all the system computers to communicate with the body control module (computer) before allowing the new kid to work. There's a relearn routine that's part of replacement procedures and unless your ecm find gives you this information, you'll be in more trouble than you can imagine.

May 08, 2010 | 2001 Saturn L-Series

1 Answer

The oxygen sensor(front and rear ) was replaced, but after replacing it, the computer box must be reset, but it doesnt work, they say it has to b e replace by a new computer box.is it possible to be...


you can use a used one from a junk yard. Why does this one not work. Have you tried removing the battery cables for a few min. Sometimes this will reset most the faults. I would check further into that before buying a new or used.

Feb 13, 2010 | 2006 Honda CR-V

1 Answer

Computer box problem . The car was submerged in flood, so does the computer box. One Resistor R15 was damaged. Computer box is labeled as 37820-P1E-900 on the first line. Second line is 395-352210...


I would replace the computer box- these can be very pricy! In fact I would recomend replacing the car, you will have nothing but trouble from now on. When a vehicle is submerged, water goes into all kinds of places, and really messes up the whole electrical system. The wires will start to corode from the inside out. The reason for this, is the fact that the insulation on the wire is much like a straw with wire in it. Once the wires get wet in a situation like this, they get wet on the inside also, holding that water, and eating the wire. Every flood car that I have seen, will die a slow and painfull (wallet)death.

Oct 20, 2009 | 1997 Honda Odyssey

2 Answers

Computer box


that will do you no good they are not repairable you just have to buy a new PCM sorry.

Aug 18, 2008 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
1996 Toyota Tacoma Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...