Question about 1989 Toyota Camry
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Remove the plastic engine covering the top of the engine by removing the 2 10mm nuts. Pull the cover off and standing in front of the car looking at the engine,the pcv is located in the rear of the valve cover on your left. There is a 3/8 id hoses attached to it. Pull the hose off and unscrew the valve with a 22mm socket..
If you look down at your exhaust manifold you will see a sensor sticking out that looks like a o2 sensor. It is not. Its an air fuel ratio sensor and it works totally different then a o2 sensor.THis is the sensor that helps adjust the air fuel mixture. If you follow the exhaust system back under the car about 1/2 way you will see another sensor in the exhaust . This is the o2 sensor and is used to monitor the condition of the convertor.
If you need one of these sensors you will have a check engine lite on with a AF or o2 code.
Posted on Apr 16, 2009
EGR stands for EXHAUST GAS RECIRCULATION.
This is a loop back system between your exhaust manifold and the underside of your filter.
The EGR valve is located between the inlet (exhaust manifold) and the outlet (intake manifold).
About 8-12" below the air filter....toward the passenger side.
EGR carbon built up can be clean.
Check the soft membrane on the EGR valve and see is it crack/torn. If it's in good shape then you may reuse it.
The professional use a vacuum hand tool to determine the travel of the EGR.
There are carbon built up inside the EGR air passage tube too,
Make sure you give both a good cleaning.
The EGR base gasket MUST BE REPLACE!
Order one before you start the job.
Please post more info on the comment window.
Posted on Aug 31, 2009
very nice pictoral of where things are located on the corolla .for some reason the PCV valve does not seem to be listed but everything else is ...nice for general maritainence ..
here is what the valve looks like
the valve is probably on the right side of the valve cover .. it has a thick vacuum hose going to the intake manafold .. it plugs into a rubber hole on the valve cover ...
Posted on Jul 20, 2010
Tips for a great answer:
Dec 23, 2016 | 2012 Toyota Corolla
Feb 14, 2016 | 1995 Toyota Corolla
Feb 11, 2014 | 1998 Toyota Corolla
Oct 14, 2013 | 1990 Toyota Corolla
Dec 24, 2010 | 2003 Toyota Corolla
Jul 20, 2010 | 1993 Toyota Corolla
May 18, 2009 | 1989 Toyota Camry
Apr 20, 2009 | 1993 Toyota Corolla
Apr 07, 2009 | 2003 Toyota Corolla
Jan 15, 2017 | 1989 Toyota Camry
137 people viewed this question
Usually answered in minutes!