Question about Cars & Trucks

1 Answer

How do i reset the security system in my 1998 chevy s10 pickup

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 57 Answers

Is it just not cranking/starting with the security light flashing? If so turn the key to the on position & leave it on for about 10 minutes or until the security light stops flashing. Then turn the key off for a second then try starting the truck. If this works check into bypassing the body control module with a resistor. Hope this helps.

Posted on Nov 06, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 1998 Chevy S10 pickup backup lights don't work

Yes it screws in on right side of tramission and you will need a 7/8 inch deep socket to remove it. You may be able to clean the old one once it is removed. There is a little ball thatgets dirty and may you can get by with cleaning it. Good Luck. Ed

Posted on Sep 06, 2008

  • 1596 Answers

SOURCE: I need to replace the fuel pump in my 1985 Chevy S10 Pickup.

EXACT PROCEDURE ! Please Rate Me Fairly for this!! Thank you And Good Luck !!


ELECTRIC PUMP

REMOVAL

  1. Before servicing the fuel pump the fuel system pressure must be relieved. See: Fuel Pressure Release
  2. Disconnect the negative battery cable.
  3. Raise the car on a hoist.
  4. Remove the fuel tank. See Fuel Tank / Service and Repair.
  5. Remove the fuel tank sending unit and pump assembly by turning the cam lock ring counterclockwise. Lift assembly from the fuel tank.
  6. Pull the fuel pump up into the attaching hose while pulling outward away from the bottom support. Take care to prevent damage to the rubber insulator and strainer during removal. After the pump assembly is clear of the bottom support, pull the pump assembly out of the rubber connector for removal. NOTE: Inspect the fuel pump attaching hose for any signs of deterioration. Also check the rubber sound insulator at the bottom of the pump. Replace damaged or deteriorated parts.
INSTALLATION
  1. Push the fuel pump assembly into the attaching hose.
  2. Position the fuel tank sending unit and pump assembly into the fuel tank. Use a new "O" ring seal. NOTE: Care should be taken not to fold over or twist the strainer when installing the sending unit as this will restrict the flow of fuel. Also, verify that the strainer does not block the full travel of the float arm.
  3. Install cam lock over the assembly and lock by turning clockwise.
  4. Reinstall fuel tank.
MECHANICAL PUMP

REMOVAL and INSTALLATION

NOTE: To ease pump installation, rotate the camshaft so the camshaft eccentric is out of the way of the fuel pump rocker arm.

  1. Disconnect fuel lines from fuel pump.
  2. Remove fuel pump mounting bolts and the fuel pump.
  3. Remove all gasket material from the pump and block gasket surfaces. Apply sealer to both sides of new gasket.
  4. Position gasket on pump flange and hold pump in position against its mounting surface. Make sure rocker arm is riding on camshaft eccentric.
  5. Press pump tight against its mounting. Install retaining screws and tighten them alternately.
  6. Connect fuel lines. Then operate engine and check for leaks.

Posted on Mar 22, 2009

  • 1 Answer

SOURCE: Chevy S10 Pickup Starter. Removed the two bolts

Just changed a starter in a 94 S10 4x4. The only way to remove the starter was to take the passenger side exhaust manifold off and bring the starter out that way. Installation the same in reverse. Hope this helps. Don

Posted on Jun 25, 2009

  • 740 Answers

SOURCE: 1997 Chevy S10 pickup Fan switch for heater runs on high only.

replace the blower motor resistor located on the heater box were the blower motor is located the wiring to the blower may go to it. This is very easy to locate if you buy the part first.

Posted on Jan 06, 2010

  • 1757 Answers

SOURCE: firing order for a 1999 chevy s10 pickup

I apologize for the late response...Due to the bad economic situation this site has had a substantial (+50%) increase in the number of questions being asked in the last four months.
I assume you have a 4.3L and not the 2.2L?

For the 4.3L:
Firing Order:
1-6-5-4-3-2

Cylinders:
6-----------5
4-----------3
2-----------1
(front of vehicle)

Distributor:
coil wire-->
-----6------->............<--------5-------
-----4------->............<--------1-------
-----2------->............<--------3-------
............(front of vehicle)

Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!

Posted on Feb 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Want to know if a 1998 motor from a s10 will fit in a 1999 s10


once you have all the parts for the swap it should be a direct bolt in. its the v6 right?

Feb 14, 2014 | 1999 Chevrolet S-10 Pickup

1 Answer

1998 chevy s10 starts fine but stalls when rev engine


I'm having the same problem. 98 chevy s10 2.2 also. Any solutions yet?

Mar 29, 2013 | 1998 Chevrolet S-10 Pickup

1 Answer

Chevy s10 security lighrt on 1998


This link will explain the problem, plus give you some options to fix this yourself.

http://vatspasslockpasskeysecurityhelp.yolasite.com/

Jan 17, 2012 | 1998 Chevrolet S-10 Pickup

1 Answer

I have a 1998 s10 chevy pu. 2.2. the security system has the fuel shut off. it wants to start right @ first then it just turns over. plenty of fire and i can smell fuel. what sensor is out u rekon? no chip...


if the security light is on, that means the system is failing and shutting the fuel off to the injectors. If it doesn't have a chip, it probably runs off the transponder in the plastic part of the key. This is very common on GM vehicles. Check out this link for info and opinions to fix this yourself. http://vatspasslockpasskeysecurityhelp.yolasite.com/

Jun 04, 2011 | 1998 Chevrolet S-10 Pickup

1 Answer

Exactly where is the reset switch for the fuel pump on a 1998 chevy s10


There is no reset switch, there is a fuse and a relay, you might want to check.


Dec 21, 2010 | 1998 Chevrolet S-10 Pickup

1 Answer

Where is the starter on a chevy s10 1998


http://www.ehow.com/how_6114322_replace-starter-chevy-s10.html Just replaced on my 96 a month ago this should help Mine was under the driver side of the truck

Nov 05, 2010 | 1998 Chevrolet S-10 Pickup

2 Answers

1998 chevy s10 will not start


engine wont run on an chevy s-10 pick-up 1998. 4cyl

Feb 14, 2010 | 1998 Chevrolet S-10 Pickup

2 Answers

Heater 1998 chevy s10


You need to check your coolant level first. If it is low you have a coolant leak. No hot coolant=No heat

Jun 22, 2009 | 1998 Chevrolet S-10 Pickup

2 Answers

Chevy S10 Pickup Starter. Removed the two bolts


Just changed a starter in a 94 S10 4x4. The only way to remove the starter was to take the passenger side exhaust manifold off and bring the starter out that way. Installation the same in reverse. Hope this helps. Don

Mar 14, 2009 | 1998 Chevrolet S-10 Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

547 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...