Question about 2004 Lexus LS 430
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the O2 sensor for bank one sensor one is located between the catalytic converter and the engine in the exhaust head pipe. see photo of your engine cylinder layout, the sensor u want to replace is the one at the cylinder #1 bank on right.
Posted on Apr 15, 2009
SOURCE: 2004 Lexus Ls 430 Low tire
My 2004 Lexus LS 430 has had the light come on several times, even after changing all four tires. There are no tire pressure sensors on my four tires. I was told the car computes tire rotations and since a low pressure tire takes more rotations than a fully inflated tire, the computer puts up a message on the dash.
To reset/turn off the message, put the emergency brake on, start the car and reach below the dash to the right side of your steering column until you feel two buttons in a depressed area under the dash. One button turns on /off your smart key and the other will turn off your tire low pressure message. Depress and hold until the message on your dash goes out and you are good to go. I know this works, I just reset mine a few minutes ago.
Posted on Nov 13, 2009
This is one of the easiest fixes you can do on your lexus...all thats needed is just unscrew the canisters' holding the lightbulbs, they look like dome fixtures encasing the HID lights...once you unscrew those, the bulbs are held in place by simple snap components that actually hold the lights in place...pull the old lamps out...unplug them, and then reverse this procedure....it took me all of 15 minutes, and a savings of $1000 to do this...
Posted on Dec 24, 2009
it should just be a bolt on the end of the ball you need a thin wrench. or it could be a clip on the older ones that goes over the ball pop iy off with a screwdriver
Posted on Apr 21, 2010
THEY MAKE THE SYSTEM AND HAVE INSTRUCTIONS YOU CAN DOWNLOAD.
PLEASE NOTE: NOT ALL BRANDS/MODELS OF OPENER WILL WORK WITH THIS SYSTEM.
HOPE THIS HELPS
Posted on May 26, 2010
Tips for a great answer:
Mar 30, 2015 | 2004 Lexus LS 430
Aug 25, 2013 | Cars & Trucks
Mar 05, 2010 | Lexus LS 430 Cars & Trucks
Feb 02, 2010 | 2005 Lexus RX330
Oct 03, 2009 | 2004 Lexus LS 430
Apr 15, 2009 | 2001 Lexus LS 430
Mar 27, 2009 | 2004 Lexus LS 430
161 people viewed this question
Usually answered in minutes!