Question about Mitsubishi Cars & Trucks
I want to put a new radio system into my colt plus and cant find how to remove the old system ( no screws to undo).
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There is a single screw located inside the glove box (on the left side) that needs to be removed. Then just carefully pull out the plastic dash as it is only secured by pushpins. Then remove the 2 screws holding the radio, and unplug the antenna and wiring harness, and it's out.
Posted on Dec 29, 2008
SOURCE: I bought a replacement radio for my 2005 sunfire on e-bay. The radio is used and came out of another 2005 sufire. It looks the same except the one I bought has a Monsoon label on it; my original doe
I have a civic and as far as the unlocking code I checked in the glove box and there is a little white sticker with the numbers that I had to put into my radio to unlock. Not sure with the sunfire though...you could always call up your dealership and they'd probably have it.
Posted on May 14, 2009
Tools required: Phillips screwdriver, small flatblade screwdriver, rachet with 6 inch extension & 10mm socket.
1. Remove negative battery terminal (for stray voltage & airbags.)
2. Remove gear shift trim
3. Remove cable attached to lighter socket.
4. Remove center climate control knob and screw beneath it.
5. Gently pry both bottom corners of climate control face (up then towards the rear) until clear of lock.
6. Pull entire climate control console rearward until clips release. Leave all wiring attached.
7. Remove 4 bolts under radio (10mm.)
8. Gently pry between dash and AC ducting panel (both sides) and pull out.
9. 4 clip hold radio to ducting panel, gently pry while pulling radio out the back.
The rest should be easy...
9. 4 clips hols radio to
Posted on Aug 15, 2009
There is an access point in the wheel arch. remove cover to reveal the back of the headlight cover. just done mine. its fiddly.
Posted on Jan 18, 2010
Tips for a great answer:
Feb 26, 2017 | Cars & Trucks
Jul 29, 2014 | 2005 Mitsubishi Colt 1.1
Mar 27, 2014 | Cars & Trucks
Aug 29, 2011 | 2005 Chevrolet Aveo
Feb 05, 2011 | Mitsubishi Colt Cars & Trucks
Sep 15, 2010 | 2005 Mitsubishi Lancer
Mar 31, 2010 | 2003 Mitsubishi Eclipse Coupe
Aug 26, 2009 | 2006 Mitsubishi Colt
Mar 23, 2009 | 2006 Mitsubishi Colt
Jul 25, 2008 | 2006 Mitsubishi Colt
898 people viewed this question
Usually answered in minutes!