Question about 2001 Chevrolet S-10
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
good evening and welcome to fixya
you can unhook the battery cables from the battery and let sit for about 3-5 minutes then reconnect, this will reset your ecm and check lights. this will though only work on codes that are not what they call hard codes. those need a computer to reset. make sure after you reconnect and start vehicle that you drive it like you normally would cause the computer will recognize the way you drive and will perform at the best level if you do this. your truck will idle up and down for a second upon first restart after rehooking the cables back up. good luck and let me know thank you and dont forget to rate this solution as fixya
please rate this solution??
Posted on Mar 28, 2009
P0440 - Evaporative Emission (EVAP) System
evaporative emission (EVAP) system has a large leak.
Check the gas cap or vent valve. these are the most common problems.
The Powertrain Control Module (PCM) at different times performs various tests on the EVAP system. OBD II Enhanced EVAP systems are in place to keep fuel tank vapors from venting into the atmosphere, and instead purges them into the engine to be burned. Regular pressure tests are conducted by the PCM to monitor the sealed system for leaks. The PCM monitors the EVAP system pressure by watching the Fuel tank pressure sensor (FTP). When the sensor indicates a small leak in the EVAP system, this code is set.
Here are some additional causes.
* A small leak in any of the EVAP hoses or fuel tank hoses
* A small leak in the purge valve or vent valve
* The EVAP Canister may be leaking
Posted on Jun 06, 2009
P2135 Throttle Position Sensor (TPS) Property Malfunction, remember this is not a car that is built by GM it is a Korean import.
Posted on Jun 07, 2010
I disagree with changing the MAF sensor. I had the same problem for about 4 years until today on my 2000 s10 4.3 4wd 125K. It runs like new, and all i did was paid 6 bucks for a can of mass air flow sensor cleaner from auto zone. Try this!! it was awesome the results
Posted on Jun 24, 2010
Tips for a great answer:
Nov 22, 2011 | Cars & Trucks
May 02, 2011 | 2003 Chevrolet S-10
Jul 27, 2010 | 1998 Chevrolet S-10 Pickup
Jun 16, 2010 | 2001 Chevrolet S-10
Apr 13, 2010 | 2000 Chevrolet S-10
Sep 21, 2009 | 2000 Chevrolet Silverado
Jul 28, 2009 | 2000 Chevrolet S-10
Mar 31, 2009 | 2000 Chevrolet S-10
184 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: