Question about 2004 Chrysler Pacifica

Open Question

Where is the knock sensor on a 2004 pacifica - 2004 Chrysler Pacifica

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 129 Answers

SOURCE: 2004 pacifica impact sensors, airbags

you may not always have to replace sensors, but you will have to change the airbag module (usually under front seat, sometimes in middle of dash) To remove the passenger airbag you have to take out the dash.

Posted on May 26, 2009

  • 299 Answers

SOURCE: How do I fix/replace thermostat on a 2004 Pacifica

yes if there is air in the system try bleeding the system remove the rad cap(when cold)and run the vehicle making sure to keep the system full for 25 mins

Posted on Sep 29, 2009

  • 1 Answer

SOURCE: crankshaft position sensor location on 2004 chrystler pacifica

can u please tell me where on my 2004 chrysler pacifica is the crankshaft sensor located?

Posted on Apr 25, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2004 chryser pacifica coil not firing coil is good


Do you have engine management light lit up on the dash?

Dec 22, 2016 | Cars & Trucks

1 Answer

My 2004 Pacifica won't stay running after I take my foot off the gas peddle?


Check for dirty IAC (idle air control), maybe EGR and throttle blade dirty also. Could also be bad coolant temp sensor, MAF/MAP, bad o2 sensor, tune up items.

Jul 28, 2015 | 2004 Chrysler Pacifica

1 Answer

Where is knock sensor on bank 2 on 2.0 neon


There is just one bank of cyinder since thjis is afour banger. the knock sensor is located at the rear of the engine about middle of the block.

Jun 19, 2012 | 2006 Chrysler Pacifica

1 Answer

Knock sensor location


Under intake manifold in center of block

Dec 03, 2011 | 2004 Chrysler Pacifica

1 Answer

2004 chrysler pacifica service tire system light is on. Replaced tires all around and aligned.


Make sure that your tire pressure sensors were not damaged. one simple way to check what tire sensor is causing the problem is to lower each tire individually and check to see if the message displays to a different tire or more than 1, depending on the TPM system your pacifica has. Chrysler has a TPM (tire pressure monitor) tester which can check each individual sensor for correct operation. and the sensor's batteries have typically a 5-7 year life span.

Feb 19, 2011 | 2004 Chrysler Pacifica

1 Answer

How do I fix/replace thermostat on a 2004 Pacifica ?? Will it cause a weird knocking noise? Help!!!!!


yes if there is air in the system try bleeding the system remove the rad cap(when cold)and run the vehicle making sure to keep the system full for 25 mins

Sep 29, 2009 | 2005 Chrysler Pacifica

1 Answer

I have a 2004 Chrysler Pacifica. When ever I make a left or right turn, either going forward or reverse, there is a cranking sound. It kinda sounds like a knocking sound.


dear friend-it might sound silly but when ever you make a ful lock turn to the left or right,it is like the body wants to break away from the suspention,it is normal wear and not easy to get rid off.

Sep 23, 2009 | 2004 Chrysler Pacifica

1 Answer

2004 pacifica impact sensors, airbags


you may not always have to replace sensors, but you will have to change the airbag module (usually under front seat, sometimes in middle of dash) To remove the passenger airbag you have to take out the dash.

May 26, 2009 | 2005 Chrysler Pacifica

3 Answers

Crankshaft position sensor location on 2004 chrystler pacifica


can u please tell me where on my 2004 chrysler pacifica is the crankshaft sensor located?

May 02, 2009 | Chrysler Pacifica Cars & Trucks

1 Answer

Knocking coming from the front of the engine...


PO441 is the error code for the evaporative emission control system. This system is fairly complex and there are a few things that can go wrong with it. Maybe a visit toa Chrysler service agent is your best option, its hard to tell whether this is related to the knocking noise but i would be checking engine oil level on the dipstick for peace of mind. A roadside worthiness check will deem vehicle unroadworthy with this code apparent. I would definately have the knock checked out it could be minor or, it could be something that will leave you on the side of the road. I hope it's minor so you can keep on motoring.

Aug 18, 2017 | 2004 Chrysler Pacifica

Not finding what you are looking for?
2004 Chrysler Pacifica Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...