Question about 2008 Ford Edge

Open Question

How to remove the dash of a 2008 Ford Edge

I need to remove the heater core and help is appriciated.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
leetamara
  • 702 Answers

SOURCE: heater core removal in 92 ford taurus

You'll have to remove the dash in layers. The heater box is the last thing you actually get to. It's not a fun job. It's a very time consuming job. I believe "book" time on that job is around 8 hours. Even guys like me that have done these before take longer that what "book" times is.

Posted on Jun 25, 2008

Ad
  • 90 Answers

SOURCE: Leaking heater core in a 1999 Ford Explorer.

this is real easy -- the heater core is under the passenger side of the dash --- should be able to replace without removing the dash -- might have to remove part of the glove box

Posted on Feb 24, 2009

  • 69 Answers

SOURCE: Replace heater core in 1988 Ford Ranger

allow the system to cool down

take radiator cap loose to release pressure

once pressure is released tighten cap

loosen clamps on the heater hoses in the engine compartment on the pass. side of firewall.

plug or cap off the heater core tubes to prevent spillage when you pull it into the truck

place a trash bag on floorboard in case spillage occurs

remove the five screws holding the heatre core access cover, three on top and two on bottom

carefully pull heater core back and down and remove it from the dash

install is reverse

Hope this helps

Posted on Mar 29, 2009

co7196
  • 3433 Answers

SOURCE: step by step replacing heater

If bolts won't come out and you've taken the nuts off, Then they are stiuds.Locate the heater hoses where they enter the firewall. The heater core is right on the other side of firewall. Which you probably already know. Good luck

Posted on May 31, 2009

  • 7353 Answers

SOURCE: easy way to replace heater core on an 98 ford ranger

the dash must come out.

Posted on Oct 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

To replace the heater core in a 2007 ford edge will I have to remove the dash


Yes, But before you do I suggest using some stop leak, some modes require adding stop leak every so often as part of their maintenance schedule.

Nov 09, 2016 | 2007 Ford Edge

2 Answers

Heater core replacement 98 chevy S10 2.2L engine


Tyrone, Check the attached links,instruction and guides, the last link has some very good info. and pics. on S10 heater core replacement. Good luck.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Heater core replacement 2000 S10 4 3L slideshow picture
How to Change Heater Core on 1994 Chevy 10 Blazer GMC Jimmy Oldsmobile...
98 GMC Jimmy Heater Core Replacement Video Diary
Heater core replacement procedure 99 S10


Jun 16, 2016 | Cars & Trucks

1 Answer

How do i replace the heater core on a 2008 ford edge


Probably with difficulty...too complex to answer here, but a search on Youtube may get you what you need.

Oct 17, 2012 | 2008 Ford Edge

2 Answers

Heater core 2000 ford windstar


Inspect/Replace If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Dec 02, 2010 | 2000 Ford Windstar

1 Answer

Is the heater core on a 1981 bronco in the engine compartment or the cab compartment


in the cab, but procedures are different depending on whether or not you have A/C. See below

1980-81 Comfort Vent Heaters, Without Air Conditioning
  1. Disconnect the heater hoses from the heater core tubes and plug the hoses with suitable 5 / 8 inch; (16mm) plugs.
  2. Remove the glove compartment liner.
  3. Remove two (2) spring clips attaching the heater core cover to the plenum along the top edge of the heater core cover.
  4. Remove eight (8) screws attaching the heater core cover to the plenum and remove the cover.
  5. Remove the heater core from the plenum taking care not to spill coolant from the core.
To install:
  1. Install the heater core in the plenum.
  2. Install the heater core cover (eight (8) screws and two (2) spring clips along the top edge of the cover).
  3. Install the glove compartment liner.
  4. Connect the heater hoses to the heater core. Tighten the hose clamps.
  5. Add coolant to raise the coolant level to specification.
  6. Check the system for proper operation and for coolant leaks.

1980-81 Standard & High Output Heaters, Without Air Conditioning
  1. Disconnect the temperature cable from the temperature blend door and the mounting bracket on top of the heater case.
  2. Disconnect the wires from the blower motor resistor and the blower motor.
  3. Disconnect the heater hoses from the heater core and plug the hoses with suitable 5 / 8 inch; (16mm) plugs.
  4. Working under the instrument panel, remove two (2) nuts retaining the left end of the heater case and the right end of the plenum to the dash panel.
  5. In the engine compartment, remove one (1) screw attaching the top center of the heater case to the dash panel.
  6. Remove two (2) screws attaching the right end of the heater case to the dash panel, and remove the heater case from the vehicle.
  7. Remove nine (9) screws and one (1) bolt and nut attaching the heater housing plate to the heater case, and remove the heater housing plate.
  8. Remove three (3) screws attaching the heater core frame to the heater case and remove the frame.
  9. Remove the heater core and seal from the heater case.

To install:
  1. Position the heater core and seal in the heater case.
  2. Install the heater core frame (3 screws).
  3. Position the heater housing plate on the heater case and install the nine (9) screws and one (1) bolt and nut.
  4. Position the heater case to the dash panel and install the three (3) attaching screws.
  5. Working in the passenger compartment, install two (2) nuts to retain the heater case and plenum right end to the dash panel.
  6. Connect the heater hoses to the heater core. Tighten the hose clamps.
  7. Connect the wires to the blower motor resistor assembly.
  8. Connect the blower motor wires.
  9. Position (slide) the self-adjusting clip on the temperature cable to a position approximately one 1 inch; (25.4mm) from the cable end loop.
  10. Snap the temperature cable on the cable mounting bracket of the heater case. Then, position the self-adjusting clip on the door crank arm.
  11. Adjust the temperature cable.
  12. Check the system for proper operation.

Oct 05, 2010 | 1981 Ford Bronco

2 Answers

I need to chanse a heater core in a 1999 ford f-350 crew cab do i have to remove the whole dash


The Heater Core is usually accessible on the Passenger side under the dash. There should be same access panels you will need to remove to get to the Heater Core.

Aug 10, 2010 | 1999 Ford F350 Regular Cab

1 Answer

Removal instructions for heater core


First disconnect steering knucke under dash. Remove dash assembly to reveal heater/AC case. Disconnect heater hoses from engine compartment. Discharge and capture AC refrigerant. Remove heater case ,replace heater core . re-assemble .

Apr 27, 2010 | 1998 Ford Taurus

1 Answer

My heater core needs replacing how do i i have a new 1 i dont know how to install it help me


Installing a heater core on a ford freestar is a tough job as is on most cars you need to remove the dash before you can get to the heater core ...This is a large job and if you dont have any experience at removing a dash then I would take to a garage ...ARE you sure the heater core is bad is it leaking or just have no heat ?? If no heat could be a thermostat , a heater control valve , low on antifreeze .....Hope this helps

Nov 20, 2009 | 2004 Ford Freestar

3 Answers

Need to know where heater core is for 93 ford aerostar


Working in the passenger compartment, remove the six screws attaching the heater core access cover to the plenum assembly. Remove the access cover.

57a32ac.gif
Heater core and case

Depress the retainer bracket at the top of the heater core and pull the heater core rearward and down, removing it from the plenum assembly.

Nov 13, 2009 | 1993 Ford Aerostar Extended

Not finding what you are looking for?
2008 Ford Edge Logo

Related Topics:

569 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5530 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...