Question about 1997 Oldsmobile 88

Open Question

How to remove engine cover on 1999 Olds with 3800 v-6

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 140 Answers

SOURCE: engine problems

IF YOUR CUTLAS HAS A 3800 YOU SHOULD BE FINE, IF IT DOESN'T THEN YOU WILL HAVE TO CHANGE THE TRANNY TO.. AS FAR AS IS IT WORTH IT, WELL MY FRIEND THATS UP TO YOU, WHATS THE CAR WORTH TO YOU? IF YOU THINK ITS WORTH THAN IT IS, YOU WILL HAVE TO PUT SOME MONEY IN IT, BUT NOTHING LIKE A CHEAP CAR..LOL.. GOOD LUCK KEITH..

Posted on Mar 12, 2009

  • 15 Answers

SOURCE: will my injectors work from my 1991 olds in my

yes they will work

Posted on Sep 02, 2010

Testimonial: "ty verry much maly now i have taken what i need out of the other car and started fixing my girl i have another one posted if u can look at it pls"

  • 10865 Answers

SOURCE: 1999 Olds Intrigue 3800. Where

hello. here is a link to give you all of the information you need about this model's filters http://www.automotix.net/autorepair/diy/1999-oldsmobile-intrigue-procedure_ac.html

J.

Posted on Sep 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Instructions on how to remove and replace a map sensor on a 1999 olds alero 2.4 liter


Unscrew the old one , screw on the new one , replace electrical connector . nothing to it . Videos on youtube if you need pictures .You need to remove the plastic engine cover if there is one .

Oct 18, 2016 | 1999 Oldsmobile Alero

1 Answer

1997 Olds LSS: 3800 engine, 198 K miles. engine running rough, loss of power; black smoke was coming out from rear of the engine compartment.


Sounds like one or two of the many sensors may have failed,. Like everyone else said... scan it...good luck.

May 06, 2013 | Cars & Trucks

1 Answer

Replace spark plugs in 1999 oldsmobile


Depends on which engine you have and model of olds. If its a V6 they are on each side of the engine, follow the spark plug wires from the coils. If its a 4 cylinder then they will be located under the cover on top of the engine, olds liked to use the quad 4 motor and to access those take off the 4 bolts that hold the top cover on the engine and disconnect the connector at the end of the cover on the drivers side. Then lift off and there they are.

Jan 31, 2013 | 1999 Oldsmobile Intrigue

1 Answer

How do I remove flywheel dust and inspection covers on a 97 olds regency with the 3800 motor?


Keep working it around till it can be removed. I recall some where you had to bend them a bit nearly to the point of breaking them before they could be removed.

Dec 18, 2012 | 1997 Oldsmobile Regency

1 Answer

3800 engine cover removal


Grab the Oil Fill and Cap and give it a quarter turn. It will remove and the cover will pull right off. It is tabed in the rear as well but just slides through a hole.

May 26, 2012 | 1999 Chevrolet Lumina

1 Answer

1999 Pontiac Bonneville 3800 engine. How do I replace the water thermostat?


Follow the top radiator hose down. It will connect to the engine. At the point that it connects to the engine is where the thermostat is located. This thermostat cover will have two bolts. Some of the 3800 engines have a temp sensor in the housing. You will not have to mess with the sensor. The housing will have 2 bolts that hold it on. Remove the two bolts and the housing will lift off. And the thermostat will be under the housing. Replace the thermostat. And reinstall the housing.

Oct 29, 2010 | 1999 Pontiac Bonneville

1 Answer

How to put in a new thermostat in my 1999 3800 z34 monte carlo?


remove the plastic engine cover, follow the top radiator hose to the engine. the piect that it is attached to is the thermostat housing. remove the two ten millimeter bolts and pull it off the thermostat and seal will be underneath, you shouldn't even have to remove the hose

Oct 13, 2010 | 1999 Chevrolet Monte Carlo

1 Answer

1999 Olds Intrigue 3800. Where is the cabin filter


hello. here is a link to give you all of the information you need about this model's filters http://www.automotix.net/autorepair/diy/1999-oldsmobile-intrigue-procedure_ac.html

J.

Sep 11, 2010 | 1999 Oldsmobile Intrigue

1 Answer

Engine problems


IF YOUR CUTLAS HAS A 3800 YOU SHOULD BE FINE, IF IT DOESN'T THEN YOU WILL HAVE TO CHANGE THE TRANNY TO.. AS FAR AS IS IT WORTH IT, WELL MY FRIEND THATS UP TO YOU, WHATS THE CAR WORTH TO YOU? IF YOU THINK ITS WORTH THAN IT IS, YOU WILL HAVE TO PUT SOME MONEY IN IT, BUT NOTHING LIKE A CHEAP CAR..LOL.. GOOD LUCK KEITH..

Mar 11, 2009 | 1996 Oldsmobile Cutlass Supreme Coupe

2 Answers

1994 Olds 88 water pump repair


jack engine up and remove motor mount and you should be able to replace your water pump

Nov 17, 2008 | 1994 Oldsmobile 88

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...