Question about 2008 Buick Enclave
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The easiest place for you to tap the Dome light power would be at teh fuse panel where the fuse is located. The ground for that to work is the little switch in teh door jam near the hinges. The problem you may run into is the dome light coming on when you activate the switch to turn those LED lights on. Your going to tap the power wire direct and put the switch to turn them on controlling the ground unless you want them to work at the same time the dome light does in which case I would tap the power line direct and then run an additional wire to tap the switch in the door. A better option, at least to me, would be to tap power off the lighter circuit and control that with the switch then you could ground anywhere you have a good ground.
Posted on Sep 22, 2011
Tips for a great answer:
Apr 08, 2017 | 2011 Buick Enclave
Jan 17, 2017 | Buick Enclave Cars & Trucks
Jan 05, 2016 | 2011 Buick Enclave
Mar 01, 2015 | 2008 Buick Enclave
Dec 08, 2014 | 2010 Buick Enclave CX
Sep 06, 2014 | 2009 Buick Enclave
Sep 06, 2014 | 2010 Buick Enclave
Feb 10, 2011 | 2009 Buick Enclave
Jan 10, 2011 | 2009 Buick Enclave
Aug 25, 2010 | 2008 Buick Enclave
57 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: