Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 325 ci conv
ok normally there are only a few screws or bolts that hold the door panel on sometimes they are located on the door handle on the inside somewhere or inside a small pop out panel on the door panel itself. Dont force anything because if you break any of the clips then you are in real trouble and have to either replace the clips or replace the door panel itself. just check and see if on the door handle has any screws or bolts. Most of the time there are just a few screws or bolts and a few clips. If there are clips try to pop them out really easy ok. If you have anymore questions just ask. I hope I helped
Posted on Oct 06, 2008
You need to remove the big plastic or vinyl rear hatch trim to get the side trims off. Remove the 10 mm bolt that holds the pull handle (if you have a pull handle), and then, using a flat tool, (like a stiff putty knife), insert the tool between the vinyl trim and the tailgate to loosen the plastic clips (there is like 18 of them); one the hatch panel is off, you will see that you can now remove the side trims.
Posted on Oct 27, 2008
you dont have to take the trrim off on this car look at the outline of the switch open from rear and pull forward then you can change the window switch/ Please rate my response thank you very much
Posted on Feb 01, 2009
Hidden screw underneath the power window switch, you have to remove, use a dull knife to gently pry up on the plastic molding, it should pop out with relative ease then you will see the screw.
Posted on Jul 28, 2009
hi there are a couple of invisible screws, look well wich plasic covers you can take away like behind doorgrip. after that you have to slide the doorpanel upwards. its not fixed with clips like a lot of other cars but with hooks so slide upwards. after repairing your windowmech. make sure the plastic sheet is replaced very good otherwis you can get water inside the car. good luck.
Posted on Feb 21, 2010
Tips for a great answer:
Feb 15, 2017 | Cadillac Cars & Trucks
Nov 09, 2013 | 2008 GMC Acadia
Jun 09, 2011 | 2007 Dodge Nitro R/T New Cars
1. Disable the SIR system.
2. Remove the power window switch assembly.
3. Remove the door trim plate.
4. Gently pull the trim panel inboard in order to disengage the trim fastener that retains the outside rearview mirror trim cover.
5. Remove the fasteners around the outer perimeter of the door panel by prying out with a commercially available door trim fastener removal tool. Pry only hard enough to disengage the fasteners from the sheet metal door skin. Be careful not to pry out too far or damage to the hooks inside the door panel will result.
6. Remove the door trim panel by lifting upward and outward in order to disengage the hooks from the door.
7. Disconnect the electrical connectors from the trim panel.
8. Remove the trim panel.
Dec 05, 2010 | 1999 Cadillac DeVille
Jan 02, 2010 | 2003 Cadillac Escalade Esv
Nov 05, 2009 | 1996 Lincoln Town Car
Sep 19, 2009 | 2002 Cadillac Escalade
May 07, 2009 | 1994 Mercury Cougar
Apr 20, 2009 | 1994 Ford Explorer Limited
70 people viewed this question
Usually answered in minutes!