Question about Mercedes-Benz Cars & Trucks

Open Question

Merc atego clutch slip

Fitted new clutch kit from agents and still slipping and gears dont always engae

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 6 Answers

SOURCE: golf mk4 slipping clutch

IF YOU GO ON EBAY DISCOUNTCARPARTS4U THEY DO A 4 PIECE CONVERTION KIT FROM DUEL MASS TO NORMAL CLUTCH SAVING YOU MEGA BUCKS .A* EBAYER

Posted on Oct 11, 2008

johnthejag
  • 286 Answers

SOURCE: Clutch Sometimes Slipping in 4th and 5th gears!

Hi Jackiaria

Unfortunately you have a hydraulic clutch, which is self adjusting on your car.

The problem you are experiencing is the excessive wear to your clutch, or oil contamination on the clutch plate.

Both these problems can only be fully diagnosed once the gearbox is removed and the clutch is inspected.
There is also a possibility of excessive wear, or scoring, on the flywheel surface, the longer you drive the vehicle with a slipping clutch, possibly requiring the flywheel to be skimmed.

Shop around for a best price, and a trustworthy garage !

Good Luck !

A FixYa rating would be Nice....Thanks.....John.

Posted on Feb 17, 2009

Miandad
  • 5 Answers

SOURCE: peugeot ae ****

1) CHECK THE ADJUSTMENT OF THE CLUTCH PEDAL, CHECK ITS FREE PLY.


2)ALSO THIS CAN HAPPEN IF ENGINE, GEAR BOX OR SELECTOR SHAFT SEAL IS LEAKING

3)PEUGEOT OFFERS A WARRANTY OF 1 YEAR FOR THE PARTS FITTED. EVENTHOUGH THE WEAR & TEAR PARTS ARE EXCLUDED, IF YOU HAVE FIXED GOT IT FIXED EARLIER WITH IN THE PEUGEOT NETWORK & IT REALLY IS THE DEFECT OF THE PART, YOU STILL HAVE A CHANCE.

www.thejavedmiandad.com

Posted on Jun 30, 2009

  • 881 Answers

SOURCE: peugeot 106 1.5D. the clutch was slipping so new

Yes clutch pedal should start to drive about 1inch off the floor and when driving keep your foot away from the pedal,/ also when new clutch is fitted did they fit a complete clutch assy /and did they surface grind the flywheel as if it was badly worn on the 1st one then the new one wouldent last very long.
as when the clutch starts to drive 1" from the floor clutch is good /when it engages right out its buggered and slips so ask about the f/wheel

Posted on Oct 02, 2009

  • 3600 Answers

SOURCE: Clutch was slipping real bad, changed gears just

check the clutch linkage and make sure it'd not binding and di you replace the pressure plate? if not then it will need to be replace to stop the slipping if the linkage is not sticking or jamming. If the pressure plate springs are broke it would cause it to slip, also if the master cylinder is not releasing this could cause it to slip.

Posted on Jun 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Freelander clutch


check out the operation of the clutch system .IT is difficult to rationalise a hydraulic clutch because if it is slipping that means that the pressure plate is being held off and not fully engaging but it also means that when pressing on the clutch the there would be no problem changing gears . But if you have a cable clutch operation then it is possible that the cable is jamming inside the outer cover and holding the pressure plate off ( slipping) and gear problems. If it is cable then replace the cable first. If hydraulic then it may mean box out for a new clutch kit.

Jan 12, 2014 | Cars & Trucks

1 Answer

Had new clutch kit fitted and mechined fly wheel new slave cylender and it is still slipping hyundai excel 1997


The clutch m/cyl has a compensating port that blocks up and doesn't fully release the clutch fork. Mostly the mechanic would have done what you asked to be done but as a matter of course he should have tested the clutch operation before handing back the car. I suggest you discuss the problem with him and explain that he hasn't fixed the problem that it came in for.

Apr 05, 2013 | Hyundai Cars & Trucks

1 Answer

Why does my clutch suddenly feel like its slipping on my merc capri xr2 turbo, engaging way to late after release of clutch pedal...hydraulic? mechanical? does it need a simple cable adjustment or flu


If you hit the gas in gear does it slip ? if its hydrolic and low fluid it wouldnt release the clutch you didnt put the year but i would have to go with adjusted at the tranny easy if thats the case also maybe the clutch is gone and theres a chatching point soyou dont mess up the flywheel those are spendy even used it engages the tranny starts the car and most importantly ballances the engine there for removing some metal could throw the balance way off

Oct 05, 2012 | Cars & Trucks

1 Answer

Hallo Polo 1.6i classic Need help with my clutch , did fit an new clutch kit , fly wheel was skim , and all the seals was replaced , a month after , it started slipping again , the fit new kabel self...


hi,at the side of the gearbox there is a green round cover when it is removed there is a fork like lever there they normally brake or it can be faulty clutch parts that is fitted.hope it is usefull

May 19, 2011 | Volkswagen Polo Cars & Trucks

1 Answer

Need to adjust clutch on w reg 1.9d scudo van


Dont think you can their auto adjust ,if the clutch is slipping then its a new clutch and fit a complete kit with plenty of grease on the thrust bearing and if you can find one with a metal support for the bearing rather than the nylon ones supplied in the kit so much the better

Jan 27, 2011 | Fiat Strada Cars & Trucks

1 Answer

Clutch was slipping real bad, changed gears just fine. Took it to a garage, installed new clutch kit, Drove it home still slipping, so I replaced slave cylinder, great for about a week started slipping...


check the clutch linkage and make sure it'd not binding and di you replace the pressure plate? if not then it will need to be replace to stop the slipping if the linkage is not sticking or jamming. If the pressure plate springs are broke it would cause it to slip, also if the master cylinder is not releasing this could cause it to slip.

Jun 06, 2010 | 2001 Hyundai Elantra

1 Answer

Auto transmission slips occassionally when shifting into high gear. 55K miles on car. 2001 merc. sable-3.0L OHC 24V


do not use high gear anymore. your clutches are slipping. you need your transmission rebuilt

Dec 30, 2009 | Mercury Sable Cars & Trucks

1 Answer

Peugeot ae ****


1) CHECK THE ADJUSTMENT OF THE CLUTCH PEDAL, CHECK ITS FREE PLY.


2)ALSO THIS CAN HAPPEN IF ENGINE, GEAR BOX OR SELECTOR SHAFT SEAL IS LEAKING

3)PEUGEOT OFFERS A WARRANTY OF 1 YEAR FOR THE PARTS FITTED. EVENTHOUGH THE WEAR & TEAR PARTS ARE EXCLUDED, IF YOU HAVE FIXED GOT IT FIXED EARLIER WITH IN THE PEUGEOT NETWORK & IT REALLY IS THE DEFECT OF THE PART, YOU STILL HAVE A CHANCE.

www.thejavedmiandad.com

May 30, 2009 | 2006 Peugeot 405

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...