Question about 2005 Chevrolet Impala
Will not start....battery has power, tried jumpstarting, starter won't even click
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2007 chevy cobalt ls won't
Ignition relay or fuse could be the problem. When you turn the key to start do you hear a fuel pump kicking on and or do you have spark when you hot wire the starter (I know it's hard to check while trying to start it)? You can email me back and I might be able to pinpoint it more.
Posted on Jun 06, 2011
SOURCE: 2000 Chevy s10 manual changed
Do you have the correct starter and is it grinding, this sounds like a bad flywheel or wrong starter or even a bad one. look at teeth of flywheel and see if they are damaged. good day
Posted on Jun 19, 2011
When it doesn't start, is the security light and maybe the battery light flashing?
If yes, it's probably the PassLock security system. I just bypassed mine on my 2002 Impala. There are several websites with information and possible solutions; including spending several hundred dollars at the dealer, to a do-it-yourself bypass for a couple dollars.
The best source of information I could find was:
There is lots of good information there.
If you want to see my writeup on bypassing the PassLock on my Impala, you may have to register at http://www.naioa.com and go to:
Posted on Jun 30, 2011
Check the battery terminals for cleanlyness and tightness.
Check the voltage when stopped, it should be 12 volts.
Check the voltage with the motor running, it should be 14 volts. If not the alternator is not charging.
If the battery voltage is low then it may need replacing.
Posted on Sep 05, 2011
Check the dash once you turn the key to the run position the passlock runs a security check using a set resistance value through the chip in the key. If the security light begins to flash the reading it received was incorrect or it didn't get a reading at all. You can try reseting the value it is looking for by turning the key to start then releasing it. After 10 minutes turn it off then cycle it start again leaving it in on for 10 minutes then back to off then one more time. After the third cycle has completed for a total of 30 minutes. You should be able to turn the key on and start the vehicle. If the light continues to flash their is a problem with the chip in the key or the connections within the ignition its self. Both are common but a Pass Lock Relearn as described above will usually adapt to the poor connection values. Hope this helps.
Posted on Sep 09, 2011
Tips for a great answer:
May 27, 2013 | Cars & Trucks
Apr 04, 2013 | 2000 Chevrolet Impala
Feb 24, 2013 | 1994 Buick Park Avenue
Jan 27, 2018 | Toyota Corolla Cars & Trucks
Sep 24, 2011 | 2007 Chevrolet Impala LS Sedan New Cars
Jun 04, 2011 | 2006 Dodge Durango
Jul 25, 2010 | 2006 Chevrolet Cobalt
Mar 27, 2010 | 1999 Ford Expedition
Oct 03, 2009 | 1993 Chevrolet K1500
342 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: