Question about 2004 Dodge Ram 1500

1 Answer

Wont star just clicking sound. Have already changed the starter

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 79 Answers

Weak connection at battery or weak ground or just a bad battery.
check all connections and clean terminals. could try to jump start if it still fails. FYI i have seen many faulty NEW starters out of the box

Posted on Nov 06, 2012

  • 1 more comment 
  • Keith touchstone Nov 06, 2012

    Have check connections but still no luck could it be a relay or a fuse

  • truemoparian
    truemoparian Nov 06, 2012

    YES starter relay is located in the engine compartment fuse box also if you make sure it is out of gear take a wire and jump the bettery wire to starter with the small terminal on the starter and it should bypass the key and engage

  • truemoparian
    truemoparian Nov 06, 2012

    http://www.ehow.com/how_6819742_install-...

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Royal star wont start, lights work, no starter turning over engine.


-If starter spin it self or you head it click but not spin the engine. >> Need new starter.
-If no click or not thing at all>>>Check battery cable from battery to starter and the line from the ignition to the solenoid.

Good Luck

Mai

Oct 15, 2014 | Cars & Trucks

1 Answer

1998 chevrolet g3500


It is more than likely,the space between the starter and flywheel.They make starter shims,you will have to figure out how many,and how thick to use,they bolt up in between the starter,and the block

Oct 04, 2013 | Cars & Trucks

1 Answer

02 Saturn L making clicking sound


Sounds to me like you have a bad ground connection, check your battery ground and your body ground. Hope this helps.

May 08, 2013 | 2002 Saturn L-Series

1 Answer

2007 kia sorrento new battery wont star hear a clicking sound


Sounds like your starter has gone out. If all the lights turn on and the radio works then it is most likely your starter. Also check that the battery ground (Black lead) is connected properly, is free of corrosion and is not loose. If all the afore mentioned are good, then its definately the starter. Either it is bad or the starter motor is loose and is not properly grounded. Hope this helps you out? Good luck!

Apr 21, 2013 | 2007 Kia Sorento 4x4

1 Answer

Wont star


the battery might be dead if u charge the battery and it does not crank over or make a clicking sound after the battey is charged then u need a new starter

May 22, 2011 | 1993 Mitsubishi Montero

2 Answers

My aero star wont turn over even when jump start it ignition makes a clicking sound i changed selenoid help


Your starter is at fault here. If you want to check it, just hit (not to hard!) your starter with a hammer on the housing. if it starts, the starter must be replaced.

Jun 05, 2010 | 1995 Ford Aerostar

1 Answer

Use to have some delay in start now wont start


if your battery voltage is good and its just clicking but wont start it sounds like you have a wiring fault to the starter if the starter has been changed. you will need to check that you have at least 12v to the starter and from the starter .

Oct 28, 2009 | 1991 Honda Accord

1 Answer

Bendix wont engage flywheel


if its clicking then the solenoid is going. try doing a starter draw test. hook a meter to the battery on dc volts. attempt to star. if voltage drops below 9 volts the its the starter. if it doesnt move much at all then its the solenoid. but i think its the starter cause the solenoid is clicking

Mar 20, 2009 | 1988 Mazda B2200

Not finding what you are looking for?
Cars & Trucks Logo

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...