Question about 2001 Ford Crown Victoria

1 Answer

Transmission won't shift

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 76,846 Answers

The following are the general instructions on the start of diagnosing any electronically controlled engine or transmission problem.

The engine and the automatic transmission (transmission control is only for automatics, engine is still computer controlled no matter the transmission type) in this vehicle are computer controlled and in most cases when a fault occurs a fault code is stored in the memory of the computer control module. There are exception to this, such as the Mass Airflow Meter and fuel pressure problems. What must be done is to have all the basic testing done such as a scan of the system for fault codes as well as a check with a live data scanner tool for engine functions that are not within range of normal, a trained technician is required to know what is correct and what isn't, then based on careful diagnostics done from a factory repair manual the correct part is replaced or the wiring repaired or the computer replaced (known as the PCM or ECM,ECU), which is very rarely the problem. Other basic checks must be done as well such as mechanical problems with the engine as well as engine state of tune and mileage on the engine. The transmission can have mechanical issues as well such as no gear engagement at all or a failed pump or other pressure related problems. Also engine mechanical problems can and do cause many drive-ability related problem such as rough idle and other symptoms.

Posted on Nov 06, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission won't shift


Fluid Change has nothing to do with making a
repair or solving anything,it will however make
a slipping trans slip worst & even quit
Do you have 120,000 miles on the trans,then it's time
to rebuild or replace it with a reman

Jul 23, 2013 | Cars & Trucks

1 Answer

2004 Chevy trailblazer won't shift out of first


Have you checked transmission fluid recently. If the levels are low and/or if the dipstick smells burnt, there is a good chance your transmission is shot. Check it out & let me know; may have another idea if the fluid level checks out.

Jun 15, 2013 | Cars & Trucks

1 Answer

Won't shift into 5th gear or over drive.


Change the trans solenoid pack inside the transmission pan

One part--- contains 3 pressure solenoids & all 4 shift solenoids

Feb 17, 2013 | 2000 Lincoln LS

1 Answer

Won't shift into overdrive


Should be in overdrive & converter locked
at 42mph or about-- unless your flooring the gas

Internal Solenoid Problem or Valve Body Dirty

Jan 23, 2013 | 1991 Mercury Cougar

1 Answer

Transmission won't shift into high gear.


are there any codes? Does it shift ok in 1st and 2nd? sounds like your over drive shift solenoid or your 3 and 4 shift solenoid is stuck and needs to be replaced

Jan 02, 2013 | 1997 Chevrolet Blazer

1 Answer

My 03 mustang won't down shift after shifting the


HI,
Search online..but it sounds like the 'synchros' in the transmission are going/gone.
Also, the clutch may be wearing out.

Td

Oct 01, 2012 | Cars & Trucks

1 Answer

My rebuilt transmission won't go forward?


i would be checking the shifter cable adjustment first see how that goes goodluck

Sep 18, 2017 | 1992 Ford F250

2 Answers

Pickup starts great, goes into all gears but won't move. It's like it is still in nutural.


Assuming the pickup is an automatic, check the transmission fluid. The #1 cause for transmission slippage is lack of Automatic Transmission Fluid.

If the pickup is a standard shift, the pin that connects the shift to the transmission has likely broken. You would still be able to shift from the inside but the gears won't engage. A bad clutch is also a possibility but you would have noticed a burning smell prior to the clutch giving out.

Dec 20, 2011 | Cars & Trucks

2 Answers

2002 Kia Optima runs great, transmission has started acting irradcally. it will shift and pull in gear for a short time after starting, but after a few minutes it fails to move the car. I've changed...


Keep driving it like that & it won't work at all

When ever you even think you have a transmission
issue,you immediately stop using the vehicle or you
end up rebuilding the trans,your call,your money & lots of it

Ask yourself ---Why would changing the fluid do anything?

Old oil out / New oil in ?

You change trans fluid because it breaks down from the heat
That is it's job,to remove heat or your trans fails

Trans & Power Steering get changed every 3 years & not
over 30,000 miles ever on ALL Vehicles

Jul 27, 2011 | 2002 Kia Optima

Not finding what you are looking for?
2001 Ford Crown Victoria Logo

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...