Question about 2006 Honda Accord
Check engine light came on and is staying on
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If the engine is running without any problems then The fault code which has flagged the checked engine light will either pertain to the upstream O2 sensor, a drop in catalytic efficiency, an EGR issue, or maybe even an EVAP issue.
A lot of EVAP issues can be resolved by simply ensuring that the fuel filler cap is on securely, otherwise a vacuum leak will be detected in the system and the check engine light will come on.
A drop in catalytic efficiency (P0420) is usually temporary and will stay away after a reset.
EGR issues can sometimes be rectified by removing the EGR valve and cleaning it, and the ports on the intake where it was sat, but there are occasions when it has to be renewed.
The O2 sensor issues are a wee bit different. There are a number of fault codes which relate to the O2 sensor, and which make the O2 sensor look faulty, when the O2 sensor is actually attempting to rectify a problem from elsewhere and isn't faulty at all. However, they could also be due to a fault with the O2 sensor. Basically, further checks should be made before condemning the O2 sensor should the fault code relate to the sensor.
Have a code read done and then have the codes reset and see what comes up.
Posted on Jun 23, 2008
YOU HAVE A TORQUE CONVERTER PROBLEM. TORQUE CONVERTER CONTROL CIRCUIT MALFUNCTION CODES CAN COME FROM ELECTRICLE TO INTERNAL MALFUNCTION. IF YOU START EXPERIENCING A HARD SHIFT OR FREE SPIN TO HARD SHIFT DON'T BE SURPRISED. TRY CHANGING FLUID. THIS MAY HELP. HONDA WOULD HAVE REPLACED TRANS IF UNDER 105 k FOR FREE. IF YOU HAVE TO REPLACE TRANS. BUY ONE FROM HONDA, 3 YR WARRANTY AND AS CHEAP AS A REBUILT TRANS. HAVE A QUALIFIED PERSON INSTALL, YOU WILL SAVE ABOUT $500 DOING IT THIS WAY. GOOD LUCK
Posted on Mar 25, 2009
Code P0108 means your MAP sensor circuit is open. MAP means Manifold Absolute Pressure. You should be able to buy one at your local parts store - otherwise, the dealer.
Posted on May 30, 2009
po505 idle air control if this is the code all hondas do it eventully, small problem easy fix u have 2 choices either remove the idle air control motor and clean the inside of it u will find it's black and the spring inside is stuck clean it with carb cleaner or gum cutter any parts store will have this it's a dirty job it will work for awhile but to replace it is recommended its not expensive for a new one which u can get at any autoparts store autozone,advanced,napa etc. there is only 2 bolts in most cases maybe 3 i doubt it though if u go online t google and type in th eyear make and model and engine size in ur case it's a 3.0 v6 and look for idle air control locations u'll find it to do this job a shop will charge u anywhere from 100.00 for diag to retrive the code plus the part and the labor so about 250.00-375.00 it will only take u honestly maybe 15 minutes to perform only tools needed are a 10 millimeter wrench there is only 1 connector to disconnect and ur done if u do this u will still have the check engine light because u have not cleared it from the computer to do this just disconnect the negative battery terminal (the black one or has a neg sign - don't disconnect the positive side +)for 5 minutes then reconnect and the computer will have reset no more light. good luck it really is that easy
Posted on Oct 10, 2009
Tips for a great answer:
Oct 03, 2015 | 2006 Honda Accord
Mar 04, 2013 | 1993 Honda Accord
Sep 05, 2010 | 2006 Honda Accord
Aug 20, 2010 | 1991 Honda Accord
Jul 19, 2009 | 2000 Honda Accord
Feb 14, 2009 | 2006 Honda Accord
390 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: