Question about Cars & Trucks
If you have a Four-Wheel Drive Suburban, it sounds like it's in 4WD HIGH. Check the switch on the dash and change to AWD or 2WD....do not use the 4WD Low (unless you're stuck in mud).
Posted on Nov 06, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hey First thing I always look for is cheapest thing to repair or look at .. Make sure your tires are not cupping .. or make sure they are wearing good and smoothe all the way around .. this can make a terrible noise if they are cupped or worn improperly.. then I would Jack up one side and shake the rear wheels make sure those bearings are tight feeling .. you should be able to tell if they are loose this way ... I dont know how many miles are on your van but usually the drive line is not the problem.. this is probably last thing you need need to shake and see if there is play in it.. Holler if you need more and thanks Jerry
Posted on Apr 22, 2009
Replace the rear door pin-switch if needed after testing proper operation.
It is telling the alarm the door is open all the time.
Most likely corroded terminals or wire.
Thanks for using FixYa - a 4 THUMB rating is appreciated for answering your FREE question.
Posted on Aug 29, 2009
Tips for a great answer:
Feb 16, 2016 | Cars & Trucks
Oct 13, 2014 | 1994 Chevrolet S-10
May 28, 2014 | 1994 Chevrolet Suburban
Nov 06, 2012 | Cars & Trucks
Sep 29, 2012 | 1994 Toyota Previa
Mar 14, 2011 | 1997 Chevrolet Suburban
Dec 13, 2010 | 1994 Chevrolet Suburban
Dec 09, 2010 | 1994 GMC Suburban
Oct 16, 2010 | 1996 Chevrolet Suburban
110 people viewed this question
Usually answered in minutes!