Question about 1995 Ford Aerostar

1 Answer

No heat in Ford Aerostar gage does not move. Heater core was flushed and new thermostat was put in

Posted by on

  • Brenda Nov 06, 2012

    The heating coils were flushed and new thermostat put in Dec last year. Now not enough heat trickling in to warm windows to defrost

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

  • Contributor
  • 24 Answers

Just a guess, but I don't think you did this yourself. Take it back to the mechanic and complain.

You didn't say if this was the result of the flush and thermostat change or if you had the problem previously. I tend to think this is a thermostat problem still. It is possible the mechanic simply forgot to install the new thermostat (remote, but possible).

If you have no heat and the temperature guage is pegged cold, the engine is not reaching operating temperature. It is the thermostat's job to regulate this. Does the radiator get warm?

I would take it back to the mechanic if you trust him, or try another if you don't.

Posted on Nov 06, 2012

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
bobiii84
  • 65 Answers

SOURCE: Have no heat. Have replaced heater core,

I don't know your vehicle, but does it have a blower door tucked in where the heater core is? If it DOES and that's broken then it could be the whole problem. It would mean it isn't switching from the A/C side of things to the heat side of them. Hope this helps, good luck! Also, just looked up the proper name for what I'm talking about, it's called a "blend door" and I think your car has one. It's what I would check, again, good luck!

Posted on Jan 20, 2010

honeymokey
  • 3113 Answers

SOURCE: 1999 ford taurus takes a long time to put out any

replace core

Posted on Apr 20, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No Heat The AC Compressor is running


Could be a clogged heater core. Take off both hoses at heater core and flush out the core when done fillup core with fluid and put back on hoses and bleed air out of system.

Jan 11, 2012 | 2000 Ford Mustang

1 Answer

Temperature guage goes to high, but it doesn't appear that the van is overheating (no steam/fluid leaking) Radiator & thermostat were recently replaced. Guage will jump to high when idle, but...


FLUSH RADIATOR, HEATER CORE AND ENGINE BLOCK.ADD 50 / 50 ANTIFREEZE AND WATER ALSO REPLACE RADIATOR PRESSURE CAP.IF TEMPERATURE GAUGE STILL STAY HIGH THE ENGINE COOLANT TEMPERATURE SENSOR COULD BE FAULTY.

Aug 21, 2011 | 1996 Ford Econoline

2 Answers

Heater core problems no heat changed thermostat still no heat any ideas


try flushing cooling system could be a blocked heater core.if flushing doesnt work remove and replace heatercore.

Nov 26, 2010 | 2002 Ford Taurus

3 Answers

Have no heat. Have replaced heater core,


I don't know your vehicle, but does it have a blower door tucked in where the heater core is? If it DOES and that's broken then it could be the whole problem. It would mean it isn't switching from the A/C side of things to the heat side of them. Hope this helps, good luck! Also, just looked up the proper name for what I'm talking about, it's called a "blend door" and I think your car has one. It's what I would check, again, good luck!

Jan 20, 2010 | 2002 Ford Taurus

4 Answers

Dodge Ram 1500 - I have no heat. Will replacing the thermostat slove this? If so how do I replace the thermostat?


Hello, No! I'm assuming that the temp gauge is working in truck & you are not over heating. On the passenger side firewall check both hoses going to/from heater core. If both are not warm then it is probably a heating core plug. You will have to replace the heater core.

Jan 06, 2010 | 1996 Dodge Ram 1500 Club Cab

2 Answers

2000 ford taurus air from heater gets cooler when fan speed is turned up did a flush put in new thermostat, did not help


You have to disconnect the heater hoses right at the heater core and flush the core by it self. I have done this numerous times with good results.

Dec 06, 2009 | 2000 Ford Taurus

1 Answer

Heater not working (no heat)


If u have issues with heatting may be this will help.

1- If the carpet under the heater core is damp, or if antifreeze vapor or steam is coming through the vents, the heater core is leaking.Remove it and install a new unit (most radiator shops will not repair a leaking heater core.

1 - If the air coming out of the heater vents isn't hot, the problem could stem from any of the following causes:
  • The thermostat is stuck open, previnting the engine coolant from warming enough to carry heat to the heater core. Replace the thermostat.
  • There is a blockage in the system, Preventing the flow of coolant through heater core. Feel both heater hoses the firewall. They should be hot.if one of them is cold, there is an obstruction in one of the hoses or in the heater core,or the heater control valve is shut. Detach the hoses and back flush the heater core with a water hose. If the heater core is clear but circulation is impeded, remove the two hoses and flush them out with a water hose.
  • If flushing fails to remove the blockage from the heater core, the coremust replaced.

Nov 19, 2009 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

01 ford expedition has no heat or a/c. replaced thermo and flushed it. any other ideas?


Assuming.......the fan switch works. You may have a blocked or leaking heater core. Hopefully you checked the thermostat before you put it in....you can heat some water up and put the thermostat in it to see if it opens. Not sure if there is a heater control valve in that ride, probably is, you may not be getting any water through it to allow water into the heater core.

Oct 11, 2009 | 2001 Ford Expedition

1 Answer

The tepurature gauge barley moves at all, very littl heat output.


dtramp;

I'm betting on the new thermostat fixing the problem.


Good luck Loringh

Nov 13, 2008 | 1989 Ford Probe

Not finding what you are looking for?
1995 Ford Aerostar Logo

269 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...