Question about 2005 Ford Explorer

1 Answer

2005 ford explorer heat dosnt work

How can i repair my heater a/c works fine but no heat in the front

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 79 Answers

Pull back the carpet on the passenger side and check for moisture, if it is wet your heatercore is bad. if no moisture and both hoses going to your heater core are hot it is possible the cable operated door is failing to open. this link should help in both cases http://www.autozone.com/autozone/repairguides/Lincoln-Aviator-Ford-Explorer-Exp-Sport-Exp-Sport-Trac-Mercury-Mountaineer-2000-2005/Heater-Core/Removal-Installation/_/P-0996b43f802e40b6

Posted on Nov 06, 2012

  • jtorres7853
    jtorres7853 Nov 07, 2012

    Check you thermostat if you dont hear the fluids flow when you turn on your heater then its possible the thermostat is failing remove thermostats and if the spring has play then its your thermostat.

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76164 Answers

SOURCE: heating problems

This problem is caused by a defective blend door (stuck) or blend door actuator motor. The blend door is what moves in the air stream to supply heat or cool, or a blend of the two, it is in the dash and the dash must be removed to access it for repair.

Posted on Nov 17, 2008

SOURCE: heating control for a 2004 ford explorer

I have a 2004 ford explorer the heat is not working.

Posted on Nov 02, 2008

  • 196 Answers

SOURCE: 2005 ford explorer front end noise.

Try lubing any bushings with a silcone spay lube i have ran into this before and the bushing on the sway bar links get dry and make a squeeking noise.

Posted on Jan 08, 2009

  • 5 Answers

SOURCE: cigarette lighter not working, already changed fuse

Look in your manual for the Power Distribution Box reference in Roadside Emergencies. It should be located under the hood on the driver's side. My 2002 Explorer has two power points on the center console and the 20A fuses in the Power Distribution Box for them are number 7 and number 9. They cost $3.99 each at AutoZone. The cigar lighter fuse under the dash is unrelated.

Posted on Jun 04, 2009

  • 126 Answers

SOURCE: ford explorer heater fan not working

If this occurs in all positions, check fuse, check for power at the fan motor, if power in all positions replace motor. if no power at fan and fuse is good, check blower motor resistor and blower motor control switch. Replace as required

Posted on Oct 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of heat mix door on 2004 chevy astro


check the hoses to the front heater core. It sounds like the front heater core is plugged.

Jan 08, 2017 | 2004 Chevrolet Astro

1 Answer

How do I get the front heater to produce warm, hot heat from the blower? for 2003 kia sedona


If the heater hoses for the front heater are getting hot, it could be a blend door problem under the dash.

Dec 03, 2014 | 2003 Kia Sedona

1 Answer

How do I get the front heater to produce warm, hot heat from the blower? for 2003 kia sedona


First I would check your radiator fluid level, sometimes being low can have this effect. Usually the rear heaters sit at a lower level and so keep working. If that is fine, then you probably have an issue with the diversion door or controller that controls the hot/cold mixture.

Dec 03, 2014 | 2003 Kia Sedona

1 Answer

2000 ford expedition no front heat, back heat work fine. I went through the glove box and into the side of the heater box, the blend door works fine. Any ideals?


if blend door works blower working check make sure you have enough coolant because suvs holds right much antifreeze.heater not working heater core plugged make sure both heater core hoses hot to touch if so problem could be temperature mode switch.

Jan 21, 2013 | 2000 Ford Expedition

1 Answer

Mdx solved problems


Is the front fan working? Or is air from outside pushing through the heater core causing heat to come out when driving?

Sep 24, 2012 | 2004 Acura MDX

1 Answer

My 1999 Nav stopped heating and cooling. Coolant/Anti-freeze is at proper temperature. Temperature gauge is fine so it does not appear to be a thermostat problem. The fan blows just fine. The front heat...


Check that the two hoses of the heater core at the firewall are getting hot. If both are not hot, then the heater core is plugged up. Try to flush in this case to free up sediment. If that doesn't work, maybe a new heater core is required, assuming that the blend door is operating correctly, and diverting hot air to the defrost or front vents.

Dec 18, 2010 | 1999 Lincoln Navigator

2 Answers

Front blower is out for heat and air,back works fine


Have the front heater core flushed ,since there is heat to the rear the thermostat is fine so it could be plugged.If the fan works on no speeds the check the fuse for the heater fan,if it's good you neerd a blower motor.

Dec 14, 2009 | 2004 Dodge Durango

1 Answer

No heat from heater in front, rear heat works fine, engine is hot


Hello

I recently had a simular problem...try to follow the heater hoses that come from the engine and go into the firewall to the heater core... one of the 2 hoses connects to a plastic valve right before the firewall. This valve shuts off the flow of hot coolant into the heater core when heat is not needed.. Look carefully at this plastic valve, there is a wire pull cable with a small loop at the end that connects to a lever on the valve. Have a helper work the heat controls and make sure the cable pulls on the lever at the firewall valve...I've seen some cables disconnected. Hope this helps with your diagnosis.

Apr 04, 2009 | 2004 Honda Odyssey

1 Answer

Problem with front air switching to heat when accelerating


Check for a vacuum leak. WHERE is the magic question.

Mar 26, 2009 | 1999 Lincoln Navigator

1 Answer

2005 Chevy Suburban front heat very weak, back is fine


try reversing the hoses on the front heater core. They are different sizes but it can be done this will flush the heater core and it should get hot then.

Jan 19, 2009 | GMC Envoy Cars & Trucks

Not finding what you are looking for?
2005 Ford Explorer Logo

237 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...