Question about 2001 Toyota Highlander
Have you probed the wiring to the bulbs to see if there is 12 volts makeing it out? Go from the switch out and check until you locate whwere the circuit is lost.
Posted on Nov 06, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: driver side wiper wont work
One side does not work? Can you move the arm with your hands? If so, look for a loose nut that holds the wiper arm on. Remove the plastic trim on the wiper arm base, and tighten the 12 millimeter bolt. Please advise if this helps.
Posted on Dec 22, 2008
I have a 2001 Sienna and have had to replace most of my tail light bulbs.
The bulbs that are mounted in the fender (wrap arounds) have acess panels in the van's interior that easily pop out and expose the back of the light assembly.
However, the bulbs that are found in the lift gate are a different matter. You have to remove the whole interior panel to the lift gate to expose the light assemblies. Go to your auto parts store and get a tool to help pop out the plastic retainers from the lift gates metal frame. Don't force the retainers out. Go slowly and gently so that you don't damage the interior panel. If you are really gentle you might even get to reuse the retainers.
Posted on Jul 01, 2009
Lok in the trunk on the left side, behind the carpet for a small plastic box with a bunch of wires going to it. Look to see if there is brake light powe coming in with the pedal depressed. If so, and no power is coming out, you need to order and replace the "taillamp failure sensor".
Posted on Jul 16, 2009
Replace the right rear brake lamp. The bulb possible use two filaments one for brake and tail light. One burnt out filament in one bulb.
Posted on Nov 30, 2009
SOURCE: no brake lights
Hi my Name is Marcus . I have a 99 toyota corolla and i have problems with the brake lights . I have change the bulbs . I have check my fuses , i have also change the brake pad switch . I was told that i to change the brake switch with a part for Toyota Dealership . Plz help me
Posted on Jun 22, 2010
Tips for a great answer:
Aug 28, 2015 | 2004 Toyota Highlander
Feb 23, 2012 | 2003 Toyota Highlander
Sep 25, 2010 | 2001 Toyota Highlander
Jun 26, 2010 | 2005 Toyota Highlander
Nov 30, 2009 | 2003 Toyota Highlander
Oct 17, 2009 | 2001 Toyota Highlander
Oct 06, 2009 | 2002 Toyota Highlander
May 02, 2009 | 2001 Toyota Highlander
115 people viewed this question
Usually answered in minutes!