Question about 2006 Jeep Liberty

1 Answer

Jeep liberty clickers both will not work to lock and unlock doors and alarm

I thought it was because I use the same remote but the less used remote key isn't working either. It worked yesterday

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,101 Answers

Is it a factory alarm or after market . both have relays and fuse to them

Posted on Nov 06, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 2001 Jeep Grand Cherokee Laredo. Alarm sets off

I found a solution on another site showing if i turn the ignition on and hold the reset button on behind the alarm light untill it turns to solid blue light then turn off the ignition , it will disable the alarm.

Posted on Dec 13, 2009

  • 8 Answers

SOURCE: 2008 Jeep Liberty Won't Start and Sentry Key doesn't work.

check battery connections especially the ground

Posted on Feb 05, 2010

JustJeeps
  • 74 Answers

SOURCE: Jeep one year old.

Assuming you have a second key try using that one to deactivate the alarm, if not replace battery in remote. Does lock and unlock work now? you will need to get the remote operational to disengage the security feature that will not allow car to start.
if not disconnect the car battery let sit for 15 min to reset system try again..make sure bettery in remote is installed properly.

Posted on Nov 28, 2008

reichweinj
  • 71 Answers

SOURCE: Remote on '99 Jeep Cherokee not working...

Normally you can get the alarm to shut off by puttin ght key in the ignition or in the door and turning. The remote will need programed with the vehicle. Should run about 50.00 or so for service department to do this. My wife has a '99 cherokee and it did the same thing. I know the remote is the problem.

Posted on Mar 17, 2009

  • 1810 Answers

SOURCE: 1999 Jeep Grand Cherokee alarm goes off everytime

alarm remotes not disarming system look in manule for instructions on how to place alarm in valet mode
to disable alarm

Posted on Jan 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Is there a way to unlock the rear door of a 2004 jeep liberty from the inside


If you hit the unlock button in the door 2 times, it should unlock the tailgate. Otherwise you may have to go back to the dealership and have them program a new remote for you. If the battery in your remote went dead, it may work again by replacing the battery.

Jul 11, 2014 | 2005 Jeep Liberty

1 Answer

Some of my doors will lock and unloc by remote and som will not how do I fix this


do they work when using the master switch on the drivers door panel? if only the drivers door unlocks when pressing the button, it may be a personal setting change needed. in this case usually pushing the unlock button on the remote twice will then unlock all doors. if there is only one lock that doesn't work it is most likely the door lock actuator that is at fault or a broken wire in the door opening wiring harness of the door that the lock does not work on.

Mar 22, 2014 | 2010 Jeep Liberty

1 Answer

I have a 1998 jeep cherokee larado i lost the clicker. how do i shut down alarm system?


Try using the key and manually lock and unlock the door from the outside.

Sep 24, 2013 | 1994 Jeep Grand Cherokee

1 Answer

2005 Liberty BCM location


try locking doors and use key to unlock driver door this may re set your alarm

Mar 18, 2013 | 2005 Jeep Liberty Sport

1 Answer

I HAVE A 2005 FORD EDDIE BAUER EXPLOYER WHEN I LOCK IT UP WITH MY PORTABLE CLICKER, THE HORN SOUNDS ONCE WHEN LOCKED CORRECTLY, WHY WHEN I HAVE ALARM ON, AND UNLOCK, THE DRIVER DOOR WITH A KEY, NO HOR


I asked a frend about your problem and he said there isnt one, he said when you use the clicker, your moveing away from the car, so you get an audable sound to let you now it's working, when you use the key your at the car and you now whats happening.

Jan 13, 2013 | Cars & Trucks

1 Answer

I have an 08 Jeep Liberty that has a remote starter on the key. I tried to unlock the car with the remote, however, that didn't work, so I unlocked the car with the key. The alarm went off, I tried pushing...


Sounds like you have a key without the chip in it. Replacement keys without the chip will only unlock the doors and will activate the theft alarm when you start the vehicle.

May 22, 2017 | 2008 Jeep Liberty

1 Answer

I have a 2006 Jeep liberty and my key clicker does not work on the drivers door but does on all the others. The power lock and unlock button inside works on all but drivers dooe whats wrong and how do i...


Failure of the Lock energiser. Take the Door trim Off, diconnect the Electric connector, Using a remote power supply connect that ,using the correct polarity, Pos to Pos....Neg to Neg, if you get no response, there is the problem.

Regards.DT

Aug 26, 2009 | 2006 Jeep Liberty

1 Answer

1994 jeep grand cherokee


There is a security feature that will allow to go for a short distance but will stop. It is basically the same as the alarm, when you lock your doors, and then shut the door as you exit, there is a red security light that will blink in the dash. If you manually unlock and open any other door besides the driver door, the alarm will go off. To disable the alarm you have to cycle the key in the driver door. The same goes for the security feature. Cycling the key in the driver door lock manually, should disable the security feature until the doors are locked again. There may be a problem with the remote if you use it instead of you key to unlock your door.

May 06, 2009 | 1994 Jeep Grand Cherokee

4 Answers

1995 Jeep Grand Cherokee Laredo Alarm system


There are switches on the door lock cylinders that are supposed to shut the alarm off when you use the key,but they go bad allot. you could try unlocking the passenger door first, since that one usually gets less use and is less likely to go bad. Otherwise you can disconnect the alarm module, it is located behind the glove box.

May 14, 2008 | 1995 Jeep Grand Cherokee

Not finding what you are looking for?
2006 Jeep Liberty Logo

387 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...