Question about Cars & Trucks

1 Answer

Have code P0171 on 2013 Escape - Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 80,608 Answers

P0171 FORD - Fuel Injection System Too Lean Bank 1have code P0171 on 2013 Escape - xicon.jpghttp://engine-codes.com/p0171_ford.htmlForum CodePossible causes- Intake air leaks
- Faulty front heated oxygen sensor
- Ignition misfiring
- Faulty fuel injectors
- Exhaust gas leaks
- Incorrect fuel pressure
- Lack of fuel
- Faulty Mass Air Flow (MAF) sensor
- Incorrect Positive Crankcase Ventilation (PCV) hose connection Tech notes If the P0171 is combined with the P0174 code, it's very likely that the problem is caused by an intake leak. If there are no intake leaks, the next step is to replaced the air filter and clean the air flow meter. If the problem persist the front oxygen (O2) sensor may need to be replaced

Posted on Nov 05, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will a 2003 ford escape starring wheel fit a 2006 ford fusion


as long as the engine codes match they will fit. 2003 Ford Escape 2.0L VIN "B" 2003 Ford Escape 3.0L VIN "1" 2004 Ford Escape 2.0L VIN "B" 2004 Ford Escape 3.0L VIN "1" 2005 Ford Escape 2.3L VIN "H" 2005 Ford Escape 2.3L VIN "Z" Hybrid 2005 Ford Escape 3.0L VIN "1" 2006 Ford Escape 2.3L VIN "H" 2006 Ford Escape 2.3L VIN "Z" Hybrid 2006 Ford Escape 3.0L VIN "1"

Apr 21, 2018 | Ford Cars & Trucks

1 Answer

Where is the code for keyless entry pad


I have a 2012 Escape and had to find the keypad code. It is located on the module inside the center console. It is fairly easy to get to. I posted info on where to look at:
http://www.escape-city.com/viewtopic.php?f=28&t=8215&start=20

Oct 05, 2014 | 2012 Ford Escape

1 Answer

Where is the factory preset code for keyless entry on a 2012 ford escape located?


The original door code was indeed on a card with the owners manual. If that is gone, the door code is on a module inside the center console on 2008-2012 Ford Escapes. There is a discussion with pictures at one of the Escape forums: http://www.escape-city.com/viewtopic.php?f=28&t=8215

I had to find my code on my 2012 Escape.

Aug 08, 2014 | 2012 Ford Escape

1 Answer

Oreillie's auto parts tested my 2003 escape gave me the code ignition distributor, engine speed, input circuit, does any one know what I need to fix my escape? Once the escape warms up, it won


Check your wiring to the cam sensor and crank sensor. If everything looks good I would think cam sensor is going bad. Also check connection on ignition module.

Mar 28, 2013 | 2003 Ford Escape

1 Answer

Where is factory preset code for keyless entry on 2011 Ford Escape located


most of the time the will give you the code. it takes a scan tool to pull the code out of the computer but there may be a way to change in the owners manual

Mar 18, 2013 | 2011 Ford Escape

1 Answer

2001 Ford Escape 3.0L V6 Engine Code P1409


Had this code for over 2 years on my 02 escape. FINALLY, found the solution. DONT replace your egr vacuum solenoid (unless you see broken pins on the connector). You can always test the solenoid to see if it still works if you suspect the solenoid is the culprit. Rather, most likely the problem will be in your electrical harness that connects from the solenoid to the pcm. I had no visible broken wires. However, in my case, my female connector harness that plugs into the solenoid was faulty. Replaced it by soldering the wires from a "new" harness that i got from the junk yard. If this fails for you, the problem will be almost guaranteed to be in either your pcm hardware or a broken pin at the pcm connection.

May 08, 2012 | 2001 Ford Escape

1 Answer

I have a 2003 ford escape. Check engine light came and my code showed P1405 code. Replaced EGR valve and sensor. Code does not show up on pocket scanner, but the escape stills loses power and will barely...


On alot of cars you must erase the code after repairs,the code is pending in the memory and can still run bad till cleared.try clearing the code

Jan 12, 2010 | 2003 Ford Escape

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

80531 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

15360 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...