Question about 2005 Chrysler Town & Country
You must have the unit removed from the car and set out of repair by a factory approved repair center or one that is adept at this brands electronics..
Posted on Nov 05, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
yea the cold cathodes or inverter for them has most likely gone bad. if the fuse was bad it wouldn't have sound.
best thing to do is replace it. unless you remove it and take it to a tv repair shop. if they can get the parts it can be repaired. but don't know at what cost.
if you have any more question please ask. good luck
Posted on Nov 26, 2009
Testimonial: "Fast response. Great advice. "
I have a 2005 Chrysler T&C. The turn signal would not work at all or activate incorrect side. The switch is easy to remove as described by dukecityman.
Once the switch is of, it has four screws holding it together.I took this apart to find that there was a circuit-board which was contaminated with dirt. wiped it of, put it back together, working fine.
If you take it apart use caution. there are parts on the "top" which will fall out. ( they go right back in) The circuit-board is on the "bottom" half. You really only need to take this part off. (less moving parts)
Your going to replace it anyway, whats the harm?
Posted on Jan 28, 2010
The cost to repair it will cost you more then to just buy a used one from a auto wrecker.
Posted on Oct 20, 2012
Tips for a great answer:
Oct 13, 2014 | 2008 Chrysler Town & Country
Nov 06, 2012 | 2002 Chrysler Town & Country
Oct 19, 2012 | 2003 Chrysler Town & Country
Jun 16, 2012 | 2001 Chrysler Town & Country
Feb 15, 2010 | 2005 Chrysler Town & Country
Mar 29, 2009 | 2002 Chrysler Town & Country
575 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: