Bmw 323i hazard and indicators do not work where is the relay?

SOURCE: BMW How do i change the front indicator bulb on my bmw 323i

When you open your hood there is a hole in the fender you need to stick a small and long skrewdriver in it and push the clip down and pull the light out with your other hand

SOURCE: where is the hazard flasher relay on a volvo v40

The flasher relay is the actual switch.

SOURCE: 1999 bmw 323i dashboard reads S and car wont turn over

check for power on the small wire on the starter with the key in the start position, if you have power, replace the starter

SOURCE: Indicators not flashing on Audi TT

i believe the audi uses two relays for the turn signals and hazzard lights so it would appear the turn relay has failed. it should be located under the dash near the steer column.... seems to me me they have some shielding under the dash so it may be hard to get to.

SOURCE: Indicator Problem

when you noticed the indicator being on solid, but flashing with the hazards, are you inside your car? I mean have you gotten out of your car to check if the bulbs are working when the indicator thrown and when the hazards are on. A hard on indicator usually means that you have a bulb burnt out. The hazards will still flash as normal when inside the car even if a bulb is burnt out because the hazards do not run via the Electronic Flasher Module. The EFM is what detects a burnt out bulb