Question about Cars & Trucks

1 Answer

88 g20 fuse panel

Looking for the wire colors and uses that come out of the back of the fuseblock/bulkhead. thanks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 1,975 Answers

Didn't have it all in just one picture. Just follow it from picture to picture move to each one. I am starting from where they come from to the back of the fuse block so you may need to follow it from the botttom picture up. This was the best I could come up with and I hope it helps you....

88 g20 fuse panel - 11_6_2012_12_47_08_am.jpg11_6_2012_12_47_39_am.jpg11_6_2012_12_47_54_am.jpg

Posted on Nov 06, 2012

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 138 Answers

SOURCE: '97 nissan altima, brake lights not working, wire

Lets keep it simple if the wiring harness is in good condition lets not look at that... first check your fuse if the fuse is good... check for power... if you have power coming and going from the fuse then check your brake switch ( located under the dash) attached to brake pedal. Please make sure your light bulbs are both good also. If your brake light switch is good and you have tried everything else it is either going to be in your 4 way switch or wiring harness

Posted on Aug 23, 2009

  • 1 Answer

SOURCE: where is fuse for drivers side heated seat on 2006 Buick Terraza

i have a 2005 terraza and the fuse panel is at the end of the dash board on the passengers side .there is a finger slot in a plastic cover,pull to remove. fuse panel is behind .i had to call a service tech to find mine. good luck pete.

Posted on Jul 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Put back fuse relay center


You can purchase a Haynes manual at any auto parts store for your make and model/year of vehicle. These manuals are very good at many things, they have all of the schematics for wiring and diagrams for fuse boxes. Worth the $20 or $30 it costs.

Nov 10, 2013 | 1997 Oldsmobile 88

1 Answer

I cannot get my door lock to work with my new sp-101 car alarm inc my 88 chevy van G20. I hooked up the green wire to the drivers dome switch using reverse polarity as i was told to do, but still does not...


A couple of thing to check. Make sure you are hooking up to the green wire and not a green wire with a small different color in it. 2, Is the door lock power actuator working other than the alarm not controlling it? Is the new alarm system working properly?? The alarm system should have a help line phone number you can call for installation help.

Nov 03, 2013 | Cars & Trucks

2 Answers

I have a 2008 gmc acacia. The front and mid auxiliary power outlets don't work. The fuse box is on a horrible location. I can't figure out which fuse it is and I don't want to spend hours...


{: ) At the underhood fuseblock, the AUX PWR fuse 20amps is for the Instrument panel and center console outlets, while the RR APO fuse 20amps is for the rear console and rear power outlets.
If your vehicle is equipped with an accessory 110vac, there is this PWR OUTLET fuse 25amps also at the underhood fuseblock. See red arrows on the sample diagram below:


wyet_helps_12.gif Safety reminders: Use only fuses of the same specifications. A higher fuse rating replacement can heat the wirings and could cause fire.

Jul 21, 2011 | 2008 GMC Acadia

1 Answer

2007 chev tahoe revere lights stay on


the fuse for the reverse lights is located on the underhood fuse block. Look for the fuselabel VEH Backup and it's 10amps. If the ignition is switched off, transm in Park, and the reverse lights still on, try removing this fuse. The reverse lights shoud be off, which means the wiring from the fuseblock going to the reverse lamps is not the fault. If the lights stayed on after removing the fuse, then you have two possible culprits. The underhood fuseblock may be shorted, or a BCM (Body Control Module) that is malfunctioning. This is assuming that the wirings going to these components are normally sound. This requires thorough testing procedures.. goodluck and have a nice day. : )

Nov 06, 2010 | 2007 Chevrolet Tahoe

1 Answer

Looking for the fuse panel for a 1987 oldsmobile delta 88


Welcome to FIxYa.com


Under left side of instrument panel


Regards, Lee Davidian


Thank you for using FixYa,com.

Oct 20, 2010 | 1987 Oldsmobile Delta 88

1 Answer

Have a 1992 chevy g20 van. the van has a tv/vcr


you'd have to find out what colored wire is behind the plugged in vcr wire theres gonna be a black n red , or black n yellow ( something like that) the black is ground ( frame/body Connected) the colored wire will usually be the powered side. , then follow that colored wire to the fuse box and relocate that powered side wire to connect to another wire , down at the fuse box that powers up with the key on. just connect it to the appropriate wire. stereo shops or car dealerships can fix that issue real quick. normally for a few dollars.

Jul 31, 2010 | 1992 Chevrolet G20

1 Answer

Have can I bypass factor alarm on a 88 supra turbo. Next where is the fan fuse located for the a/c on the raditor


need you to examine under the dash first you may have to remove any panels (lower Dash) to get a visual-look for relays connected to your crank wire-they need to be disconnected and reconnected to oringinal wires (they are color coded) try that first

Sep 17, 2009 | 1988 Toyota Supra

1 Answer

The plug that connects to the alternator has three


Yes the White wire is the reason. It goes to the Internal Regulator.
As you view the connector that plugs into your alternator, look at where the lock tab is.
Lock tab on TOP. The Black wire goes to the Left side. The White wire goes to the Right side.

The Black wire, ties into the Red wire down in the wire loom. (The Red wire goes to the starter solenoid, and this is connected straight to the battery. This is why the Red, AND the Black wire, are both Hot wires)

The White wire goes through the bulkhead wire loom, and to the bulkhead connector.

(Down under the steering shaft, and on the firewall, you'll see a rectangular Black box shape, with a Bunch of wires, coming into it from the engine compartment. The bulkhead connector is two pieces. Following it through the firewall, the other side of it is the fuse panel)

Where the White wire connects in the fuse panel,
it should go straight to the ACC fuse. (Accessory)

May 15, 2009 | 1987 Chevrolet Camaro

1 Answer

No power in fuse panel (5a access/hazard) or brake lights


If there is no power in a fuse panel for ANY of the fuses, suspect the wire harness bulkhead connector. The harness comes into the firewall from the engine compartment, as a Male connector. Under the dash the bulkhead connector is a Female socket.

There are individual socket holes for each one of the fuses, on the Female bulkhead connector. There are flat bladed pins for each fuse on the Male bulkhead connector.

Upon separating the Male bulkhead connector from the engine compartment, inspect the individual connections. You may see some that are burnt, or corroded. They may even be melted! (The machine screw heads are on the interior side. You have to remove them. There is a rope gasket made of a sticky substance, {Name escapes me at the moment}, that makes separating these connectors Fun! {?)

This could be the problem.

Apr 09, 2009 | 1972 Chevrolet Corvette

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...