Question about 2005 Jeep Liberty

5 Answers

Check engine light is on. is there a way to get the code?

Is there a way to get the code with out taking it in?

Posted by on


5 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If the light is still on.. turn the jeep off and without turning it back on quickly turn the key on and off 3 times ( to the on position so that everything else is running except the engine) and you should see a code pop up where the kms are.

Posted on Jan 14, 2009

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

If you had the equipment to do so you wouldnt be asking so simplest answer is no, but you dont have to go to the dealership most auto shops have computers that can read the same codes, it should be free to stop in and ask them to give you the code and possibly turn off or reset the light.

Posted on Jan 05, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

Some of the larger auto parts will do a quick scan for free (they want to sell you parts). Some codes are best to ignore (or put aside) codes such as o2 sensor often are generated when the mixture itself is too far out of range. with a code such as that, I would pay more attention to one dealing with fuel / air management first, then clear codes, run and see if O2 code stays gone. What I'm telling you is you need some experience when dealing with codes or you can spend a lot of $ to get to the right place.

Posted on Jan 05, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Expert
  • 90 Answers

To add to The previous answer...depending on where you live O'reilly's may be called Checker or Kragen Auto as well.

Happy code hunting...hope it's nothing big. :)

Posted on Jan 05, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Take it to AutoZone, Advance Auto, O'Reily's. They will hook up the scanner and tell you the code for free.

Posted on Jan 05, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

2008 chevy silverado 4 wheel drive, check engine light on

Your joking right ? No such thing , vaporizer. What , your engine is congested . obviously you don't know to much about check engine light diagnostics . To turn the light off , you need to retrive the codes stored in the PCM/ECM engine computer an then do the diagnostics for that code an fix the problem , be it a wiring issue or sensor . Then the light will go off . If you not joking ., i suggest you take it to a qualified repair shop .

Jan 28, 2017 | Chevrolet Silverado Cars & Trucks

1 Answer

2007 CRV check engine light goes on and off

Do not pay for a scan. Take the car to a store that offers free scans and tell them you need the codes stored in history and any pending codes. Then post the codes here for help with diagnosis. Don't rep, ace parts until you have a good diagnosis.

Jul 05, 2017 | 2007 Honda CR-V

1 Answer

My 01 gmc jimmy spits and sputters on take off and rpms jump around

As per your problem,the check engine light comes on due to technical problems in your car.In this case i suggest you to click the link below :----Check Engine Light On car?
------------Basically the computer needs to be scanned to retrieve the error codes stored in ECM.In this issue,i suggest you to click this link:----How to Read Codes from Check Engine Light? scan procedure you will get P4 digit error codes.If suppose you get this error codes,then click the link below,to know more about error codes:----

Check engine light with codes P2195 and P2197?
---------------There are many other reasons to for check engine light coming ON,i suggest you to click this link below and go through its troubleshooting procedure:---------Car jerks while going uphill and Check engine light is ON?
--------One more reason is as follows :----After getting car washed, check engine light is ON and key less entry not working, tried reprogramming. Also car shows fuel pressure?


After replacing throttle body the Check engine light starts blinking?


This will help.Thanks.

Feb 16, 2012 | Cars & Trucks

2 Answers

How to reset check engine light?

Go to your local O'Rielly's or Autozone. They will tell you the code and reset it for free. Otherwise take the negative battery cable loose for about 10 min. This will clear the ECM, but you won't know what tripped the light! Best Wishes, TJ

Aug 06, 2011 | 2007 Hyundai Azera Limited Sedan

1 Answer

Check engine light on 1999 kia sephia

take you car to an auto parts store that checks your check engine code for FREE most of the chains do.take a pen and paper thats in case they cant give you a print out .you need the codes and what they are also get the trouble shooting tips for those codes .if you still need more help repost with the codes and what they are..... example p0100 mass air flow circuit malfuntion.todays cars all start with those codes it help you narrow down the problem

Jul 27, 2010 | 2000 Kia Sephia

1 Answer

Code for check engine light

If your check engine light is on take it to any part store and have them scan it for you. Then come back here and post the codes that came up.

Feb 28, 2010 | 1993 Mercedes-Benz E-Class

1 Answer

Neutral lamp flashing and check engine light on

your post is 7 months old, i image by now you had to take it to get fixed,
in the future any time your check engine light comes on ,even if it comes on and goes back out the next time you drive, take it to an auot parts store. like advanced auto or auto zone etc etc .they will check your code for ( free ) the code is stored in your memory , ask for a print out or write down the code and meaning of the code .that is what you need to post on fixya to get a faster response. example p0103 mass air flow low voltage. happiness is no check engine light. since i am new to fixya i have taken on all the un answered check engine light ,

Feb 03, 2010 | 2001 Mitsubishi Montero Sport 4WD

1 Answer

Transmission not wanting to shift with fast take off ,check engine light is on, seems to work ok with slow take off.

Did the 'Check Engine' Light come ON? Whenever the 'CHECK ENGINE' (Service Engine Soon) light comes on, the ECU (Engine Control Unit) sets a Diagnostic Trouble Code (DTC). These codes identify the particular engine management system which caused the light to come on.
You'll need to use/find an OBDII (On-Board Diagnostic) Scanner to retrieve any code which have been stored in the ECU computer. Afterward, we might be able to help you DIAGNOSE the problem and perhaps eventually fix the problem.

Oct 18, 2009 | 2001 Dodge Dakota

2 Answers

Check engine light

The check engine light comes on when there is a problem with your car and will store a code which will tell you what that problem is. Take your car to a local auto parts store or garage and tell them your check engine light has come on. They can scan your computer and, most of the time, tell you what the code is and what it means. Good luck

Aug 30, 2009 | 1996 Mitsubishi Galant

1 Answer

Check engine light and no accelaration

all the codes starting p1 are manufacture specific codes you need to take it to a dealer. the p0734 relates to a transmission problem the person who serviced your vehicle only cleared the fault codes the prob is still there

Nov 16, 2017 | Dodge Durango Cars & Trucks

Not finding what you are looking for?
2005 Jeep Liberty Logo

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides