Question about Ford Cars & Trucks

1 Answer

How to change left rear window motor on a 1997 f 350

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Instructions

    • 1

      Remove the 1997 Ford F350's power window switch from the door panel with the trim tool. Unclip the window switch from the power window wiring harness by hand.

    • 2

      Remove the hex-head screws from the door panel with the socket set. Lift the door panel upward 1 inch before pulling it off the door by hand.



    • 3

      Elevate the window glass to the top of the window channel by hand. Tape the glass to the top of the door with packing tape to prevent it from descending into the door during the repair.

    • 4

      Unclip the F350's power window wiring harness from the power window motor by hand. Unbolt the old power window motor from the door and window regulator with the socket set.

    • 5

      Remove the old window motor before inserting the new power window motor in its place.

    • 6

      Bolt the new window motor to the window regulator and door with the socket set. Plug the power window wiring harness into the new window motor.

    • 7

      Reinstall the door panel by reversing the method employed to remove it.



Posted on Nov 05, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the Blower motor relay on a 2002 Ford Econoline E150, and how do you change it so both the front and rear blower motors work on all 3 speeds?


There would be two relay's , one for front an one for the back . And the relay would be for high speed only . And it just so happens there are two AUX blower motor relay's .
Auxiliary Blower Motor Relay C403
Left rear corner of vehicle, above wheelwell
Auxiliary High Blower Motor Relay C404
Left rear corner of vehicle, above wheelwell

Front blower motor relay - K73 top left , Six relay's at top left .


check it out here http://www.bbbind.com/free_tsb.html

Feb 17, 2017 | Ford Econoline Cars & Trucks

1 Answer

2003 gmc envoy Windows fuse


Are all windows not working ? Two separate circuit breakers left & right . Both in rear fuse box . Fuse Block - Rear Beneath the left rear seat
Check for broken wires inside the rubber boot from body to doors.
Do you know about electronic control modules ?
The power window system consists of the following components:
?€¢
Driver door module (DDM)


?€¢
Passenger door module (PDM)


?€¢
Body control module (BCM)


?€¢
LR power window switch


?€¢
RR power window switch


?€¢
Window up and window down relays in each of the rear passenger window switches


?€¢
Window lockout switch


?€¢
Reversible power window motors in each of the doors (circuit breaker protected)


?€¢
LT DOOR CB 25A (System power for left rear window)


?€¢
RT DOOR CB 25A (System power for right rear window)


The power window system will operate anytime the retained accessory power (RAP) system is active or when the ignition switch is in the ACCY or ON position.
The DDM contains 4 power window switches which are integral components. Closing any of the normally open, rocker type switches provides the DDM with a request for power window operation. The switches for the 2 front windows have 3 positions Up, Down and Express Down, while the switches for the rear windows have only 2 positions, Up and Down. Each of these switches and their positions is a direct input into the DDM. Upon receiving a request for power window operation, the DDM, transmits a class 2 message indicating the switch and it's changed position.
The PDM contains a single power window switch that is an integral component. Closing of this normally open, rocker switch provides the PDM with a request for the front passenger power window operation. The switch for the front passenger window has 2 positions Up and Down. Each of these switch positions is a direct input to the PDM.
The 2 rear passenger doors have there own switches. Each of the switches contain a power window up and down relay. A switch activation alone can control the up and down functions of the rear windows. However the BCM, upon receiving a class 2 message from the DDM, can control the set of relays which will activate the rear window motors.

Check

Oct 21, 2016 | 2003 GMC Envoy

1 Answer

2006 Toyota Sienna right rear quarter window won't close


Possible motor. Have you tried pushing on the window while operating the switch? Does the switch feel normal as you operate it? Possible broken wiring in door harness where wiring exits the door and enters the vehicle. You will have to cut protective boot to inspect wiring. Failure rates on rear window motors are low.

Aug 02, 2015 | Cars & Trucks

1 Answer

BMW rear left hand side tail light and flasher not working also drivers window not working


The electric window could either be the fuse,switch, or window regulator motor at fault..Sometimes the window motor electric plug can vibrate loose or become loose from door slamming..Also the switch can become loose as well or contamination if you are lucky..You will have to remove door panel to inspect these components..and fuse panel..The light could be a faulty bulb..Check and replace bulb..before involving the signal indicator switch lever...If bulb is at fault go ahead and change bulbs at both rear sides..Do not try to repair signal switch because of air bag..If you can hold down on the turn signal switch and it works the switch is at fault...

Feb 21, 2015 | 2008 BMW 525i Sport

1 Answer

Fix windows they wont go down any more,, fuses look ok


There can be several reasons. When you say you "fixed" the windows, it makes me wonder what was wrong with them before you started. The part inside the door is usually a window regulator. It has teeth to be moved by the gear on the electric window motor. The position of the regulator teeth is suppose to match the position of the window. If you imagine setting the window 1/2 open, then that is as far as the window will rise when the electric window motor cranks. The electric motor gear will only travel so many turns for each cycle of the motor switch.


Mixing motors on the wrong side of the car is something else that can go wrong if you change W motors. The W motors are not the same from front to front or rear to rear. They are often compatible diagonally (right front to left rear) (left front to right rear).


Finally, you can have a switch box for the auto up/auto down feature inside the door panels. You need to check for power at the W motor and then backtrack.

Oct 23, 2014 | 2001 Ford Ka

1 Answer

2002 Lincoln Continental Left Rear Passenger Window Inoperable - but control appears to be "live". Owners manual reveals dedicated fuses for all BUT the left rear passenger window. Pulling those fuses...


looks like you have a problem with the switch, not the fuse, or the relay.
Motor will be the last and most expensive solution, so start with relay

Jun 13, 2009 | 2002 Lincoln Continental

1 Answer

Motorized left rear window will not go up. I hear the motor in operation but nothing happens.


U will need to buy and replace the window regulator, it is a dealer only part.

Apr 13, 2009 | 2004 Volkswagen Beetle

4 Answers

Back door wont open and window wont go down


The rear window has to be completely down in order to move the tailgate! You should be happy that your window is stuck up, unlike mine which is stuck all the way down! I have to completly take apart my tailgate!! If you want to try a trick to get the rear window down, my bronco has a rear window switch right next to the headlight knob, take the 2 purple wires on that window switch, and cross them, if your motor still works and if the wires are good, that should make the window go down!!! good luck, hope that helps!

Oct 05, 2008 | 1995 Ford Bronco

1 Answer

Drivers door window would go down but come back up only inch at a time then would have to wait five minutes and then it would come up another inch. Is it the regulator or the motor. the car is a 99 camry,...


Sounds like worn out motors pulling lots of amps to do the job in all thee cases, especially if the other windows are okay.
You can, if you're patient and cool, ( or know somebody who is...) swap the left rear window motor with the driver window motor.
My left rear was factory-new because nobody ever rode back there.
You have to use a motor from the same side, and the driver motor has to go into the left rear door
because it keeps the window up.
Be patient, take your time, allot and allow a complete day to do it and when it's done write a check to yourself. You'd have to write it to somebody, right???

Jul 30, 2008 | 1995 Toyota Camry

2 Answers

Back windows are not rolling down


Rear windows on my 2002 Taurus stopped working. Fuse OK. Problem is only with the rear windows. Started as an intermittent problem on one window and now neither rear window works.

Jul 27, 2008 | 2002 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...