Question about 2004 Buick LeSabre

Open Question

2004 Buick LeSabre license plate bulb replacement

How to change license plate bulbs on 2004 Buick LeSabre Custom

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 196 Answers

SOURCE: 2000 Buick Lesabre custom liscense plate bulb

kind of tricky, took me an hour to get it figured out, but you got to opend the trunk and take out the 10 or so 10mm nuts sticking out of the backside of the lid, then the whole solid piece where the lights are on the back will slide off, then you can change the bulbs above the license plate and put it all back together

Posted on Mar 20, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change license plate bulbs in 2004 buick lesabre custom


  1. Disconnect the tail/back up lamp harness connector from the from the body wiring harness.
  2. Remove the tail/back up lamp assembly from the rear compartment lid.
  3. While supporting the tail/back up lamp assembly, unplug the tail/back up lamp harness grommet from the rear compartment lid and remove the tail/back up lamp from the vehicle.
  4. Remove the license plate lamp bulb from the lamp housing.

Sep 22, 2014 | 2004 Buick LeSabre

1 Answer

How do I replace license plate bulbs on 2004 park avenue


I was wondering if this was a trick question.

If you don't see little screws holding the light cover on, you will have to access them from inside the trunk.

remove/replace.

Feb 02, 2013 | 2004 Buick Park Avenue

1 Answer

How to charge tag light


Vehicles: 2004 Buick LeSabre 3.8L SFI OHV 6-cylinder

From sylvania.com:
License plate light bulbs - 2 compatible tag light bulb types:
(1) 161
(2) 161LL (LL stands for "Long Life")
SYLVANIA Long Life miniature bulbs perform twice as long as any standard miniature bulb. Designed for durability, lower maintenance and greater safety.

These are available online, and also at every auto parts store:
http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_Long-Life-Incandescent-Mini-Bulb-Sylvania_5080167-P_1259_R'GRPLAMPAMS___

Since no maintenance manual covers this, do what mechanics do when maintenance manuals fail - get creative.

Unscrew or pry off the lens cover, pull out the License Plate's Type 161 bulb, and insert a new 161 or 161LL bulb, and replace the cover.

Test your installation by turning the ignition key to the "Accessory" position, which will turn on the running lights and the license plate light.

Dec 05, 2011 | 2004 Buick LeSabre

1 Answer

How to replace license plate light on a 2002 buick lesabre


Hi. Remove the retaining screws from the license plate light assembly with a Phillips screwdriver. There are two screws on each side of the lens assembly.

Pull the light assembly cover down out of the way to gain access to the bulbs. Twist the bulb socket counterclockwise to remove it from the assembly and pull it straight out. Pull the bulb out of the socket.

Push the new bulb straight into the socket. Replace the bulb and socket inside the light assembly and turn it clockwise to secure it.

Replace the assembly cover and secure it with the retaining screws. Tighten the screws with a Phillips screwdriver. Turn on the lights to test your new bulbs.
Take care

Aug 04, 2010 | 2002 Buick LeSabre

2 Answers

How can I replace the license plate lights?


mcdevito75 here, Just above the license plate in the bumper you should see the light lens, simply remove the 2 screws and change the bulb/bulbs

Jun 18, 2010 | 2002 Buick LeSabre

1 Answer

How do I replace license light bulbs in my 1995


I have a 2002 which is a little different body style but it may be the same process. You have to take the back plastic section that holds the license plate loose from the car. There are bolts that are inside the trunk that hold the plastic panel on. Mine are in the trunk lid. If your plastic panel, license plate, etc. goes up with the trunk lid they are in the lid. You need deep type sockets to reach the nuts, at least mine does.

Mar 31, 2010 | 1995 Buick LeSabre

1 Answer

2000 Buick Lesabre custom liscense plate bulb


kind of tricky, took me an hour to get it figured out, but you got to opend the trunk and take out the 10 or so 10mm nuts sticking out of the backside of the lid, then the whole solid piece where the lights are on the back will slide off, then you can change the bulbs above the license plate and put it all back together

Mar 08, 2010 | 2000 Buick LeSabre

1 Answer

2001 LeSabre - replace rear license light. The rear license plate lights do not light up the license at night. How do you get to them? What size bulb do you need?


kind of tricky, took me an hour to get it figured out, but you got to open the trunk and take out the 10 or so 10mm nuts sticking out of the backside of the lid, then the whole solid piece where the lights are on the back will slide off, then you can change the bulbs above the license plate and put it all back together, im cant remember off hand the bulb size, but your local auto parts store will have that info when you go to buy them

Mar 05, 2010 | 2001 Buick LeSabre

2 Answers

Rear license plate does not work


My park avenue has star bit screws on both sides of the plate lights right at the top of the license plate holder. I just chaged them last week. I do not know what size the bit was and I am not sure your car is the same. My car looks just like the car in the picture just longer and a little bigger.

Jun 23, 2009 | 1998 Buick LeSabre

1 Answer

I can't get to the license plate bulb in a buick lesabre.....don't want to force the plastic....


There should only ne two little screws on the plastic plate for the bulb. just unscrew and gently pull downward till bulb and harness are exposed. this should be a 194 bulb just pull out and replace with a new one.

Apr 05, 2009 | 1995 Buick LeSabre

Not finding what you are looking for?
2004 Buick LeSabre Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...