Question about 2001 Saturn SL
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: radio locked on 2001 saturn sl2
Press & hold the 2 & 3 buttons at the same time for about 10 seconds; a 2 or 3 digit code will appear, write this # down, press & hold the am/fm button for about 10 seconds: another code will appear, write this # down, then call 1-800-537-5140 and enter 202108 (this is a dealer code - you can use one of the others below, too) followed by the # key, then enter the numbers that you wrote down, followed by the * key.
The call will give you a 3 or 4 digit override code. Write this code down so you have it if you ever need it again. Enter this number into your radio following the instructions in your owners manual.
Note: If you get an override code that starts with 0, you drop the 0 when entering the code into your radio.
If you don't have an owners manual, then press & hold the hour button until the first 2 digits of your code come up, then press & hold the minute button until the last 2 digits show. Then press the am/fm button.
Repeat step #5 twice in a row it will disable the Theftlock and you will see "---". You will then be able to change to a new lock code.
IMPORTANT - Other dealer codes: 139010, 206053 and 620529 - these may be inactive by now; GM will remove them from time to time if they feel that they are "compromised".
Also - there are 2 modes to the TheftLock - "LOC" or "SEC" and "INOP". Once the anti-theft is activated, the radio display will show "LOC" or "SEC" - you then have 8 attempts to enter your code. If after 8 attempts you don't enter the correct code, the display will change to "INOP". It is only at this time that you will need to wait one hour, with the ignition ON; before you can retry. After that - you will have only 3 attempts before the radio enters "INOP" mode again.
-KC GTO Dad
Posted on Sep 18, 2009
If your bulbs and fuse are good, then you will need to check the switch located on the side of the transmission. It will have several wires coming out of it. This switch controls your reverse lights
Posted on Oct 26, 2009
well easiest way is to tape the old key near the ignition
without key you need to essentially re wire the ignition and under the hood arround the computer controlls and power supply
Posted on Jan 06, 2010
Hello ihatethiscom: My name is Roger and I will help you. The code p0341 Is for the camshaft position sensor There are several things that can cause the code. A intermittent engine misfire to a camshaft sensor problem. I always look for the simple problems first. A lot of people look at the sensor as being the problem not always so. As for the code p0442 this is a fuel evaporator system problem. This has several options when it comes to finding a solution. As I said try to look for the simple solution. A loose fuel cap can set this code also. A dirty fuel vapor canister or a cracked vapor line could cause the code also. What the code is saying is there is a small vacuum leak to the fuel tank. Should you need further help please just ask. Please rate the answer you received. Thank You for using Fix YA. Roger
Posted on Apr 19, 2010
Tips for a great answer:
Jul 05, 2015 | 2001 Saturn SL
Aug 26, 2012 | 2000 Saturn SL
Mar 11, 2012 | 1993 Saturn SL2
Feb 14, 2011 | 2001 Saturn S-Series
May 20, 2010 | 2001 Saturn SL
Nov 12, 2009 | 1992 Saturn SL2
Mar 04, 2009 | 2000 Honda S2000
Feb 18, 2009 | 2001 Saturn SC
61 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: