Question about Cars & Trucks

Open Question

2005 vw jetta windshield wipers wont work. fuse is good

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
steve_e_uk
  • 1675 Answers

SOURCE: 2000 VW jetta VR6 windshield wipers wont work

first try the fues box see if you have a blown fues, next if you put your wipers on can you hear the motor running for them? if you can the linkage has poped off from the motor, its a bit awkward to get it back on and no gaurentee that it will saty on, you might have to replace linkage, or, it might be the cogs on the actual wiper arms have splayed and are now smooth so they dont grip to move, you can take them off by the nut on the arm , get a can (coke can or simular) cut a rectangle out of it the hight and width if the cog, rap it round the cog, (make sure it does not overlap on the ends) and force the arm back into place and then do the nut up, this is just a short quick fix if that is the case you will have to replace the motor, also you can check the relay to the motor in the fues box, give it a tap a couple of times it might work again if not replace it...hope you find these sugestions helpful

Posted on Feb 08, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 vw jetta wiper still not working after changing the wiper motor and wiper switch ? help


Did you check the fuse? Have power at the plug? could be a bad ground.

Dec 06, 2015 | Evan Cars & Trucks

1 Answer

What has caused the windshield wipers and washers to quit working on my 2006 VW Jetta TDI


First thing I would check is the fuse for the wipers. That's usually the problem

Nov 24, 2014 | 2006 Volkswagen Jetta

1 Answer

2000 jetta wipers wont work


Washer fluid is probably frozen, have you checked the fuse for the wipers? There should be an overload protection in case the blades stick

HTH

Jan 15, 2013 | 2000 Volkswagen Jetta TDI

1 Answer

Fuse panel diagram for 2005 VW Jetta 2.5


i am having trouble with power windows at first it was the switch and then the motor now that i replace both it won't work at all gas cap wont open and windows dont go up i check both fuses boxes and fund no burn fuses can you please help is for a 2005 VW Jetta 2.5

Feb 24, 2012 | Cars & Trucks

1 Answer

1999 vw jetta. windshield wipers won't work but i can hear the motor? can you tell me what i need to do or at least check?


the linkage to the wiper came apart, remove the cowling at the base of the windshield and check linkage

Feb 12, 2011 | 1999 Volkswagen Jetta

1 Answer

Windshield wipers on 2007 VW jetta not swiping


wiper gears may be broken, got to junk yard and buy motor and gear assembly for windshield wipers, should only take an hour to change out.

Feb 15, 2010 | 2007 Volkswagen Jetta 2.5 Sedan

2 Answers

2000 VW jetta VR6 windshield wipers wont work


first try the fues box see if you have a blown fues, next if you put your wipers on can you hear the motor running for them? if you can the linkage has poped off from the motor, its a bit awkward to get it back on and no gaurentee that it will saty on, you might have to replace linkage, or, it might be the cogs on the actual wiper arms have splayed and are now smooth so they dont grip to move, you can take them off by the nut on the arm , get a can (coke can or simular) cut a rectangle out of it the hight and width if the cog, rap it round the cog, (make sure it does not overlap on the ends) and force the arm back into place and then do the nut up, this is just a short quick fix if that is the case you will have to replace the motor, also you can check the relay to the motor in the fues box, give it a tap a couple of times it might work again if not replace it...hope you find these sugestions helpful

Feb 08, 2010 | 2000 Volkswagen Jetta TDI

1 Answer

Wipers wont work wiper motor humms but wipers wont move i can move them with my hand very easy and fuse is ok


tighten the wiper arm nuts vw know for loosenign up. don't wipe ice off or it will happen again

Jun 30, 2009 | 1998 Volkswagen Jetta

2 Answers

Signal and windshield wiper aren't working


switch in steerig console combo wiper turn?

Mar 01, 2009 | 1999 Volkswagen New Jetta

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...