Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2000 Chevy s10 manual changed
Do you have the correct starter and is it grinding, this sounds like a bad flywheel or wrong starter or even a bad one. look at teeth of flywheel and see if they are damaged. good day
Posted on Jun 19, 2011
are you sure you got the wires back on tight? Also it sounds like the bendex is not kicking out like it is supose to.....Did you change the starter cylenoied?
even some new starters are bad, it doesent happen much but it does happen. You might even take the starter back out and run Jumper cables to the starter. See if the bendex will kick out and stay out untial you diconect the starter......Sorry for your run of bad luck and I hope this is of some help.
Posted on Jun 21, 2011
Either the starter will have to come out for testing, rebuilding, or replacing, or the battery is not strong enough to power the starter-maybe it's low on charge. Are all your battery and starter connections clean and tight? Verify the condition of your battery before you condemn the starter.
Posted on Nov 23, 2011
You will have to pinpoint what the engine is missing...
All three of these are tested when the engine is being cranked over. There are two way of checking for fuel. Fuel pressure and fuel trigger. Both are very important and must be present for the engine to start. Fuel pressure is self explanatory. You just hook up the gage and see what the reading is. Fuel trigger is check with a noid light. The injector gets unplugged and the noid light gets plugged in to the injector clip. With the engine cranking over, this light must blink. This is the signal to the injectors from the computer. You can have all the fuel pressure in the world, but it wont matter if the injector is not pulsing gas into the cylinder like it should.
Compression tester, spark tester, fuel pressure gage and noid light are all accessible at your local auto store. All three tests play a very important part in diagnosing a no start condition. Be extremely careful when doing these tests.
Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.
Thank you for using FixYa, have a nice day.
Posted on Aug 03, 2012
Tips for a great answer:
Mar 03, 2015 | Pontiac Cars & Trucks
Feb 27, 2013 | 2001 BMW X5 4.4
Oct 20, 2012 | Chevrolet Malibu Cars & Trucks
Oct 18, 2012 | 1995 Toyota Camry
Oct 15, 2012 | 2004 Jeep Grand Cherokee
Sep 28, 2012 | 2001 Toyota Tacoma
Sep 06, 2011 | 1996 Nissan Quest
Jan 25, 2010 | 1990 Ford Bronco
72 people viewed this question
Usually answered in minutes!