Question about 1996 Acura RL

1 Answer

Where is the ignition module on my 99 RL?

My car won't start, it turns over but never fully engages/starts. I had this same problem with my 96 a few years ago and had the ignition module replaced. The mechanic said it was an easy fix and I could have done it myself. I just don't know where it is to pull it and have it tested. Please help.
Thanks,
Bill

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 51 Answers

It is located in the distributor. you can get a replacement distributor form local parts store. I would get one from there vs used.

Posted on Jan 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99 voyager starting problems


Your ignition switch is going bad. The strange noise is the starter remaining engaged and locked to the flywheel. Your best bet is to have the starter tested at your local auto parts store, to deduce that it is not, in fact, your starter.

Nov 05, 2013 | 1999 Plymouth Voyager

1 Answer

99 saturn sl won't start after turning off engine for few minutes


had u turn on similar problems with Honda crx replaced fuel pump relay turn on ignition but don't start car listen

Apr 18, 2013 | 1999 Saturn SL

1 Answer

Changed my car battery on my 99 Avenger and the horn goes off and car won't start.


It sounds like you have an alarm system that is disabling the ignition. You need to reset the alarm system.

Apr 21, 2012 | Dodge Avenger Cars & Trucks

1 Answer

I have a 96 Chevy Corsica and it won't start.... I


If you have a healthy spark (a blue snapping spark), it would not be a problem in the ignition system or the module. An orange, weak, or intermittent spark could point to trouble in the ignition.
I would check the timing on it, maybe it is a timing chain problem. It should have fired and ran a bit with the starter fluid. The fact that it didn't, even with a good spark, well, probably needs a little shop time investigating. Jumped timing from a worn chain? Low compression in one or more cylinders? A couple of things you need to consider.
Good luck.

Mar 31, 2012 | 1996 Chevrolet Corsica

1 Answer

My 96 breeze that just got a new starter and still won't start


Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.


To confirm the problem, the basic troubleshooting is required.


Click this link below and follow the troubleshooting:------

http://technoanswers.blogspot.in/2012/02/car-starting-issues.html

---------

This will help.

Thanks.

Feb 11, 2012 | 1996 Plymouth Breeze

1 Answer

1995 nissan maxima


So the problem has been occuring for a year and you are just now trying to fix it? Sorry, I just simply do not understand why people do this...keep driving it until it won't drive anymore even though you KNOW it has a problem....Maybe you can explain this to me???

If you can hear the starter clicking when you try to start it, then you have a bad starter. If it makes no noise at all. then you most likely have a bad clutch switch.

Dec 31, 2011 | 1995 Nissan Maxima

2 Answers

The car will turn over but won`t start but if I turn the key on and jump the starter it starts


Sounds like the ignition switch has gone kaput. The ignition switch come in two pieces, an electrical switch and a mechanical switch.

The switch electrical portion can be replaced separatly from the mechanical portion (tumbler that the key engages). It is not a real difficult repair but requires some mechanical knowlege of how the column is assembled.

This can be verified with electrical test equipment prior to buying a new electrical switch.

Apr 18, 2011 | 1994 Volkswagen Golf

1 Answer

I need to find a driver side headlight for my 96 acura rl. any good suggestions?


Do a Google search and also look on Ebay. Might take more than 1 day of looking since items change constantly. If you have any nearby wrecking yards look there too. I think 96, 97, 98 and maybe 99 share the same headlight assembly.

Dec 27, 2010 | 1996 Acura RL

1 Answer

Van wont start when key is turned


sometimes when one replaces the ignition a small plastic part falls from the new ignition causing it not to fully engage-for fun turn key with a liitle firmness all the way to sart-sometimes with added pressure it engages-orthewise remove ignition for examination

Sep 25, 2009 | 2003 Dodge Caravan

1 Answer

2000 Passat ignition key stuck in ignition


make sure park is fully engaged, shift in and out of park a few times, there is an interlock that keeps the key from comming out unless the park position is fully engaged, this may be sticking or be defective or out of adjustment..

May 15, 2009 | 2000 Volkswagen Passat 4Motion

Not finding what you are looking for?
1996 Acura RL Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...