Question about 2007 Chrysler 300C 3.0

1 Answer

Swirl pot limp mode

Posted by on

  • Lee Fisher Nov 05, 2012

    Need more explanation of the issue please?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chrysler Master
  • 75,822 Answers

The following are the general instructions on the start of diagnosing any electronically controlled engine or transmission problem.

The engine and the automatic transmission (transmission control is only for automatics, engine is still computer controlled no matter the transmission type) in this vehicle are computer controlled and in most cases when a fault occurs a fault code is stored in the memory of the computer control module. There are exception to this, such as the Mass Airflow Meter and fuel pressure problems. What must be done is to have all the basic testing done such as a scan of the system for fault codes as well as a check with a live data scanner tool for engine functions that are not within range of normal, a trained technician is required to know what is correct and what isn't, then based on careful diagnostics done from a factory repair manual the correct part is replaced or the wiring repaired or the computer replaced (known as the PCM or ECM,ECU), which is very rarely the problem. Other basic checks must be done as well such as mechanical problems with the engine as well as engine state of tune and mileage on the engine. The transmission can have mechanical issues as well such as no gear engagement at all or a failed pump or other pressure related problems. Also engine mechanical problems can and do cause many drive-ability related problem such as rough idle and other symptoms.

Posted on Nov 05, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the meaning of limp home mode


It means the computer noticed something wrong or lost contact with an important sensor that could ruin the engine or transmission and has de-rated the power so you can get home without the car stopping or damaging itself. Limp Home Mode or Limp-in is an operating condition set by the vehicle computer.

What is limp home mode in a car? - Quora

https://www.quora.com/What-is-limp-home-mode-in-a-car What is the meaning of limp home mode Google Search

Dec 21, 2016 | Cars & Trucks

1 Answer

Can't figure out u r chrysler 300m is stuck in limp mode,or better yet y it over heats in limp mode if u drive it on freeway.


limp mode only fires every other cylinder when a fault is detected to save the motor ,,don't run it in limp mode or on the freeway

May 26, 2015 | Chrysler Cars & Trucks

1 Answer

Limp mode


There are many different systems that could cause limp mode, engine, transmission, emissions... Limp mode is a safety that allows you to get off the street and to a shop for repairs without stranding you. Usually a significant failure eg trans will not shift.

Apr 22, 2014 | 2000 Dodge Caravan

1 Answer

Check engine light code p200a


P200A Intake Manifold Runner Performance
The Variable Charge Motion Actuator (VCMA) is used to adjust a valve (flap) in the intake runner for each cylinder. The valve does not close off the runner but restricts it in such a way to cause turbulence (swirl) in the air fuel mixture. The turbulence in the air will reduce emissions under cold start condition. The valve is operated by a worm gear type driver which doesn't open for limp home mode in the case of loss of current supply. (It doesn't have a return spring.) The system also has a Valve Position Sensor (VPS) to supply a feedback of the valve position to the PCM.

Feb 11, 2014 | 2011 Kia Sorento

1 Answer

How to get out of limp mode


when vehicle is shut off then restarted it will come out of limp mode. if problem is still there it will go back into limp mode. check for codes

Apr 21, 2013 | 2000 Jeep Grand Cherokee

1 Answer

1990 chrysler new yorker will not shift into overdriver


You may have to have your ******/computer ran for any codes to give you a better idea of why it is limp mode. There are many causes of limp mode. A sensor or solenoid or bad wire will send the computer into limp mode. The TPS and map sensor both can affect limp mode

Jun 09, 2012 | 1990 Chrysler New Yorker

1 Answer

What is limp mode?


Hi, limp mode or (limp-in mode or limp-home mode)occurs when your computer in your car is not communicating with the sensors on your engine. On some cars(volkswagon Passat for example) If you disconnect the battery then the computer will lose all of the settings and will go into limp-in mode.
The car will have little power and a top speed of only about 30 miles per hour.
The function of limp-in mode is to get you to a place that can repair the car but the car is barely drivable.

Jul 23, 2011 | 2002 Chrysler Town & Country

2 Answers

I have xc90 d5 there is warning message came of engine system service required with power loss how to solve


Hi,

This is probably due to a problem with the swirl flap actuator arm - if you remove the top of the engine cover (the plastic bit) and look at the top, left front of the engine, do you see a plastic arm (approx 70 - 100 mm long) disconnected?

Regards,


RK

Nov 08, 2010 | 2009 Volvo XC90

1 Answer

2002 Impala: transmission limp mode...


Most transmissions have a limp mode, or limp-home mode.
If the driveline computer thinks there is something wrong, it can lock the transmission into one gear, such as 2nd gear. Usually reverse will also be available. The Impala automatic has 4 speeds. 2nd speed or gear will get you home, but the engine rpms can get a little high. I wouldn't get on the expressway will in limp mode.
Before taking to the shop, you might want to try and reset limp mode by turning the car off for a couple minutes, or you may have to disconnect and reconnect the battery.

May 16, 2010 | 2002 Chevrolet Impala

Not finding what you are looking for?
2007 Chrysler 300C 3.0 Logo

411 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...