Question about Cadillac Cars & Trucks

1 Answer

1985 cadillac crankshaft hub removal - Cadillac Cars & Trucks

Posted by on

  • 2 more comments 
  • Dean S Nov 05, 2012

    Anyone know what type of hub puller works best for this? I am trying to fix a broken timing chain and just got to the point where I realised I can not remove the timing cover without pulling the hub off the end of the crankshaft

  • Dean S Nov 06, 2012

    You are not even close to understanding what I asked. I am already way past this issue. I never said anything about the crank pulley, I asked about a hub. Typical people on the internet giving advice when they themself have no clue..

  • Dean S Nov 06, 2012

    I went out to Harbor frieght and bought a standard 46pc pulley set and used parts of my powersteering pulley setup also so as to rod the pulley inside the threaded hole of the crank and not interfere with the hub removal. There has to be a specific tool used for this but I improvised and jerryrigged something to work.

  • Dean S Nov 06, 2012

    Reynaldo, do you even know what a 1985 Cadillac crankshaft hub looks like? apparently not by your answer. You should not give advice when you obviously do not know what your are answering.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cadillac Master
  • 2,431 Answers

This is a difficult situation,without the crank pulley remover you are in for a ordeal,is there any auto shop or parts store that can rent you one out?Other than that you can try a punch driver and a hammer and see if you can work its way out, but mind you need to be real careful you dont damage the crank pulley.

Posted on Nov 05, 2012

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 95 Answers

SOURCE: Removing the Hub on a 1985 F150 4x4

You will need a special spanner wrench to disassemble most hubs depending on mame of hub They loan these at many auto part stores

Posted on Jan 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to change freezes plugs on a 93 Cadillac Deville


http://www.cadillacforums.com/forums/cadillac-deville-1985-2005-including-1985/113670-freeze-plug-replacement.html

May 24, 2015 | 1993 Cadillac DeVille

1 Answer

Remove theasket manifold from a 1985 Cadillac Seville to change the gasket


Donald, which gaskets, Re POST year, make, model,engine, transmission and complete question so we, here at fixya can answer your question effectively.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Changing the Intake Manifold Gasket Any tips for the Brougham
Cadillac CTS Intake Manifold Removal and Valve Cover Gaskets
83 cadillac 4 1 engine AVI

Feb 19, 2015 | 1985 Cadillac Seville

1 Answer

I have a 1985 cadillac bearitts. i wanna change the oil pan casket. how do i do it


This is going to be a big job! The frame parts are going to be in the way of removing the oil pan. If you really want to try and tackle this by yourself, get a service manual from an auto parts store and they will provide instructions. Sometimes you can raise the engine sufficiently to get the pan to clear the crankshaft without pulling the engine but it is always dangerous to do so.

Best of luck, Jim

Mar 05, 2011 | 1985 Cadillac Eldorado

1 Answer

How do i pull a crankshaft hub off of a 1984 cad seville 4.1 v8 what tools do i use


You need to rent or buy a "Crankshaft Harmonic Balancer Puller"

Jan 21, 2011 | 1984 Cadillac Seville

1 Answer

Can I tow a 1985 ford bronco II 4x4 with hubs and a 5 speed manual trans. without disconnecting the drive line


yes if you make sure the front hubs are disengaged(turn little hub releases in middle of the wheel,man trans is ok auto not ok you do need to remove the drive shaft of an auto not man

Oct 26, 2009 | 1985 Ford Bronco II

1 Answer

I need instructions


If the rotors are not all in one with the hub, it is simple. Remove the wheel, remove the brake caliper, use a soft mallet to loosen the rotor and remove, then replace the rotor, pads and spray with cleaner to remove finger prints and grease and then replace the wheel.

Jun 21, 2009 | 1985 Cadillac DeVille

1 Answer

Removeing front hub 1985 chevy blazer 4x4


You will need a hub socket, once you pull the cap off and remove the four wheel drive locker. the nut is deep inside the spindle. make sure you keep track of how the hub parts come out. you have one washer with many small holes in it that has to match up with a dowel pin inside, this is very critical! you can get a hub socket at a local parts store.

Apr 03, 2009 | 1985 Chevrolet Chevy

1 Answer

Removing the Hub on a 1985 F150 4x4


You will need a special spanner wrench to disassemble most hubs depending on mame of hub They loan these at many auto part stores

Dec 16, 2008 | 1985 Ford F150

1 Answer

Rear hubs moving in and out about quarter to half inch


the pin is worn if it is a c lock could be the c clip or axle if its old could be all not hard to check pull the cover .

Nov 19, 2008 | 1985 Cadillac Fleetwood

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...