Question about 1995 GMC Sierra
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
firing order 1-6-5-4-3-2 # 1-3-5 on driver side, 246 on passenger side. the distributor turns clockwise and the cap should have some kind of mark for # 1
Posted on Feb 25, 2010
if you know the firing order, then get #1 on TDC, and then take the cap off, the rotor should be pointing forward, thats where number 1 wire should go.
Posted on Dec 05, 2010
the Distributor cap should be numbered. from when i last did mine i do believe that when i was facing the truck the drivers side of the cap went 5,3,1 and the passenger side went 2,4,6 and this is going from the back of the cap to the front. if all else fails you can just plug them in and you will notice the truck either running ruff or stalling/not starting. if so just swap the wires around till it works. hope this helps!
Posted on Mar 27, 2011
SOURCE: need diagram for plug wires
ok number one on distributur should be marked and its 1-8-4-3-6-5-7-2 in clockwise order and on engine, right side is 1-3-5-7. left is 2-4-6-8. couldnt find a good diagram but thats correct
Posted on Sep 12, 2011
Tips for a great answer:
Jan 06, 2016 | GMC Cars & Trucks
Dec 14, 2014 | 1995 GMC Yukon
Sep 12, 2011 | GMC K1500 Cars & Trucks
Jul 27, 2010 | 1995 Chevrolet Tahoe
Jul 02, 2010 | 1991 GMC C2500
May 09, 2010 | 1995 GMC Jimmy
Mar 04, 2010 | 1995 GMC Jimmy
Feb 25, 2010 | 1993 GMC Sierra K1500
Jul 17, 2008 | 1995 Ford F350
Jun 24, 2017 | 1995 GMC Sierra
147 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: