Question about 1999 Ford Crown Victoria

1 Answer

Windows het how is it going i have a 99 crown vic and my windows stop working what could be the problem thank you

Posted by on

  • yadayada
    yadayada May 11, 2010

    u will need to check the following:

    Fuse # 8 15A Lighting Control Module, POWER WINDOWS,

    PATS Module, Keyless Entry, Clock

    Memory, Electronic Automatic Temperature

    Control (EATC), Power Windows, Police

    Spot Light, SecuriLock, IF THIS FUSE IS OK U WILL NEED TO HAVE AN ACTIVE TEST RUN OF THE LIGHTING CONTROL MODULE., A FORD DEALER CAN DO THIS TEST.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 46 Answers

There are several potential issues.

First, I would check the fuses for your windows, that's the cheapest and simplest solution.

If that doesn't fix it, then I would check your switches/wiring. A lot of the time, the switches can get gummed up/corroded.

The last thing I would try is the window lift motor itself, see if it runs separate from the car.

Posted on Jan 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 99 crown vic and can't seem to find the


The car is designed not to spin it's wheels when taking off. If you want to make it do that you need to either change the powertrain programming or replace some powertrain parts.

May 07, 2012 | 1999 Ford Crown Victoria

1 Answer

How to fixaciggerate lighter in 99' ford crown vic


check the fuse first, then check the connections at the back of the lighter. very basic electrical circuit

Feb 02, 2012 | 1999 Ford Crown Victoria

1 Answer

Where is the ambient air temp sensor for the 03 crown vic p71


i have a 99 crown vic suvillan and i cant find the ambient air temp sensor where is it please help

Mar 02, 2011 | 2003 Ford Crown Victoria

1 Answer

Ihave a 99 crown vic, was diagnosed with a faulty idle control sensor. Where is it located and how hard is it to replace? Thanks


if it was called an idle air control solenoid, then no it isn't hard to change. its on the throttle body area

Aug 12, 2009 | 1999 Ford Crown Victoria

2 Answers

Wiper motor replacement for a 99 crown vic


I replaced the same part on a 1994 Crown Vic. There are a few bolts which go through rubber mounts on the firewall and that is how the wiper motor fits against the firewall. There is a clip on the wiper drive that must be pressed and slid off the wiper shaft. The hardest part was getting clearence between the engine and wiper motor. If I remember there was a way to turn the wiper case to clear the engine. I have asked myself why this was engineered like this? There is nothing important in the way that 3/4" of clearance could have been given for removal.

May 06, 2009 | 1999 Ford Crown Victoria

4 Answers

My 99 Crown Vic acts like it isn't getting gas


check for clogged fuel filter first, usually the pump works or it dosen't, check and get back to me.

May 01, 2009 | 1988 Ford Crown Victoria

1 Answer

Flashing air bag light on a 99 crown vic ex-police car


yea its what connects the steering wheel with a ribbon for a solid contact and its is always being tested to make sure there is a connection.

Nov 13, 2008 | 1999 Ford Crown Victoria

Not finding what you are looking for?
1999 Ford Crown Victoria Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...