Question about Chevrolet Cars & Trucks

Open Question

No fuel injector pulse 86 2.8 camaro - Chevrolet Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
dmfixit
  • 226 Answers

SOURCE: injectors 94 camaro 3.4

70857bd.jpgdaec2ed.jpg84e0793.jpg http://www.autozone.com/az/cds/en_us/0900823d/80/0e/cc/fa/0900823d800eccfa/repairInfoPages.htm

Posted on Jan 03, 2009

Ad
johnny5846
  • 379 Answers

SOURCE: no injection pulse

looking at the schematics, well the PCM controls the pulse width to the injectors , BUT , there is a injector coil fuse , its #2 in your kick panel fuse box , a 20 amp , check it , sure hope that fix ya . that would be sweet .

J5

Posted on Jan 15, 2009

  • 1 Answer

SOURCE: 89 s10 2.5 has fuel and fire injector has power but no pulse

injector pulse is just controlled by the ecm or computer as some would say,u said u replaced wires? did u have a fire or melt wires? ecm is known to go bad on these,had a few of these trucks back in the day.

Posted on Feb 16, 2009

Molson02536
  • 3854 Answers

SOURCE: 1985 corvette no pulse to injectors

Very important that if you are not savvy of working on your Vette ...you would be better off - taking your car to a dealership for repairs on your trouble codes. However if you feel that you want to, First locate your car's alcl this component is located just below the instrument panel and to the left of the center console. Remove the plastic cover the first two slots to your right are the A & B slots.
The A slot is the diagnostic slot and the B slot is the ground slot. Insert the computer key into these slots if you do not have a computer key, a paper clip or wire jumper clip will do, (with the engine off) this is very important...now only put the ignition key to on ( not start !!!) the check engine light will display a code 12 which is one flash followed by two flashes. This code will be flashed three times ..followed by the trouble code stored in your car's computer.

What ever the code is it will be flashed three times. Have a paper and pencil ready and write down the code.

Code #12: Normal No Codes. 
Code #13: Open Oxygen Sensor Circuit. 
Code #14: Coolant Sensor Circuit Low.
Code #15: Coolant Sensor Circuit High. 
Code #21: Throttle Position Sensor High. 
Code #22: Throttle Position Sensor Low. 
Code #23: Manifold Air Temperature Circuit High.
Code #24: Vehicle Speed Sensor. 
Code #25: Manifold Air Temperature Circuit Low. 
Code #32: EGR System Failure. 
Code #33: Mass Air Flow Sensor High.
Code #34: Mass Air Flow Sensor Low. 
Code #36: Mas Air Flow Sensor Burn-Off Function Fault. 
Code #41: Cylinder Select Error. 
Code #42: Electronic Spark Timing.
Code #43: Electronic Spark Control. 
Code #44: Lean Exhaust indication. 
Code #45: Rich Exhaust Indication. 
Code #46: Vehicle Anti Theft Fault. 
Code #51: Faulty Mem-Cal. 
Code #52: Fuel Calpak Missing.
Code #52(1990-91 Corvette Only): Engine Oil Temperature Sensor Low. 
Code #53: System Over Voltage. 
Code #54: Fuel Pump Circuit Low Voltage. 
Code #55: Defective ECM. 
Code #62: Engine Oil Temperature Sensor Circuit High.

Please remember that if you have the computer key installed in the alcl and you start the engine (you will ruin the engine's computer) only put the ignition to on (not to start).

If you should get a check engine soon display.. you can use the above procedure and codes to buy the right part or at the very least to keep from getting taken for a ride and be made to pay hight prices for some inexpensive module that you could have installed yourself.

If your engine displays a trouble code ... your engine will go into limp mode ..it will still run but very poorly. You might be able to reset the computer if it will not start (just to get home) by disconnecting both battery cables and re-installing them ...this is not recommended ..but if you are stranded it might help unitl you get your car home or to a repair shop..good luck.

Good luck and hope this helps. 

Posted on May 08, 2009

  • 740 Answers

SOURCE: 1993 honda accord 2.2,no injector pulse

This sounds like a main relay problem here is a diagram its located under the dash under steering column its the brownish -orange box in the picture. http://www.tegger.com/hondafaq/mainrelaylocation/7-main_relay_closeup.jpg Good luck and thanks for using FIX YA

Posted on May 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

89 camaro 5.0 tbi injector pulse intermitant


What have you checked? I would start with a noid light to see when the two injectors wiring is pulsing. if intermittent then i would check the pickup coil located inside the distributor. It controls timing for the injectors and for the timing advance.

Oct 18, 2014 | 1989 Chevrolet Camaro

2 Answers

I have a 305 5.0l in my 89 camaro she's burning rich and sputters on my acceleration from first to second. She's flooding obviously as one injector is dry and the other is soaked


injectors wear out-u can trya procleaning-or use amsoil PI--inspect othr parts of fuel system also-old car--getta data stream run to pinpoint othr issues

Apr 02, 2013 | Cars & Trucks

3 Answers

My 1989 camaro runs when I pour gas in the throttlebody but then dies when the gas runs out


I guess my first question is how do you know the injector has fuel ?
You would need to know if the injector is getting voltage and pulse from the computer, and if the fuel pressure is enough to allow the injector to spray.

Dec 13, 2012 | 1989 Chevrolet Camaro

1 Answer

91 Camaro truns over, has fuel and pressure, good spark, i suspect there is no power to the injectors. Ran great, now it shuts off and will not start. Help please as we have troubled shoot many of the...


The 5.0 tuned port engine has two sets of injectors - all injectors are powered by the pink-black wires from two 10amp injector fuses. They get ground signals on the green and blue wires from the computer.
You can use a low voltage test light to check for injector pulse.

Aug 16, 2012 | 1991 Chevrolet Camaro

1 Answer

1986 pontiac fiero won't start, changed fuel pump and relay gas coming up, but no spray from injectors


Actually the injectors don't spray "all the time". They pulse open for a few milliseconds then close every time they are grounded by the ECM. The distributor has a pick-up coil (Variable Reluctance sensor) that provides an A/C (Alternating Current) pulse every 120 degrees of crankshaft revolution to the Ignition Control Module also contained inside the distributor. The I.C.M. amplifies, rectifies and passes along the pules as a +12V square wave to the ECM. The ECM uses these pulses to calculate RPM and determine when the engine is rotating vs. stopped. Together with this information and more from Coolant Temp., Throttle Position, Manifold Pressure and Air Temp. the computer constantly 'looks up' what the appropriate amount of time it should pulse the injectors for to deliver the required amount of fuel.
With that in mind, the injectors are supplied with +12V via a 3 AMP fuse labeled INJ 1 for 1 bank of 3 injectors, and INJ 2 for the 2nd bank of injectors. Make sure your injectors are getting +12V whenever the key is ON or they wont fire (or at least 3 won't).
If all 6 injectors have +12V and you have fuel pressure (checked by pushing down in the center of the Schrader (tire valve stem looking thing) valve and fuel SPRAYING out, and your still not getting fuel it is probably because the injectors aren't pulsing. They are probably not pulsing because the ECM is not receiving any reference pulses from the distributor. If you have spark then you are producing reference pulses.
I hope some of this explained from an actual '86 Fiero GT 2.8L V6 owner/mechanic will help narrow down your problem.

Mar 20, 2011 | 1986 Pontiac Fiero

1 Answer

91 camaro 5.0 5sp no injector pulse and no power to fuel pump


Using a multimeter check the wiring for power at the pump and at the relay. It sounds like a bad relay.

Jul 19, 2010 | 1991 Chevrolet Camaro

2 Answers

Ran out of gas. Put gas in but will not start. Had fuel pump checked ok. Had fuel filter replaced. Checked if fuel was getting to injectors ok. Getting spark. Will try to start if starting fluid sprayed...


Check your fuel pressure regulator. Remove the vacuum line attached to it and hook a fuel pressure gauge to the schrader valve on the fuel input line. The gauge should read at least 40 PSI, probably closer to 50-60 or more.

If it's lower than that, you're not getting enough fuel to the engine. It may also be stuck shut, meaning that you're putting in too much fuel.

If you find that the exhaust smells of fuel after cranking for awhile, there's a good chance that you're flooding out due to a faulty FPR.

Jul 04, 2010 | 1991 Chevrolet Camaro

1 Answer

1991 chevy camaro 3.1


Mine had a similar problem, there is a wire that goes from the computer to the fuel rail and this wire sends info on how much fuel and when to inject the fuel... if that wire is grounding out then this will cause the lack of cylinders to fire and also explain the inconsistency. So i would start with the fuel rail..hope this is of some help

Oct 07, 2008 | 1991 Chevrolet Camaro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...