Question about Cars & Trucks

Open Question

How to remove the digital clock from a ford puma?

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 36 Answers

SOURCE: How do you take bumper off a ford puma?

Front Bumper (434230)

Removal
1. Remove the radiator grille.
2. Remove the left-hand front wheel.
3. Detach the fender splash shield from the bumper cover and fender (both sides).
4. Remove the air cleaner intake pipe retaining clip.
5. Detach the air cleaner intake pipe from the air cleaner housing.

1 Rotate the pipe clockwise.

2 Detach the pipe.
6. Detach the bumper cover from the fender and support bracket (both sides).
7. Remove the left-hand side bumper retaining nut.
8. Remove the right-hand side bumper retaining nut.
9. Remove the bumper.

Installation
1. To install, reverse the removal procedure.

Posted on Jan 19, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drivers door will not open from outside or inside ford puma


Did you find a solution? I have the same problem with my puma?

Apr 20, 2014 | 1997 Ford Puma

Tip

How to remove a bumper off a ford puma


How to Remove a front bumper off a ford puma

Removal
1. Remove the radiator grille.
2. Remove the left-hand front wheel.
3. Detach the fender splash shield from the bumper cover and fender (both sides).
4. Remove the air cleaner intake pipe retaining clip.
5. Detach the air cleaner intake pipe from the air cleaner housing.

1 Rotate the pipe clockwise.

2 Detach the pipe.
6. Detach the bumper cover from the fender and support bracket (both sides).
7. Remove the left-hand side bumper retaining nut.
8. Remove the right-hand side bumper retaining nut.
9. Remove the bumper.

Installation
1. To install, reverse the removal procedure.

on Jan 31, 2010 | Ford Focus Cars & Trucks

Tip

How to change a heater control unit/heater control ford puma


Ford Puma

What you will need:-
1.Phillips Screw Driver
2.Depending on what stereo system you have, stereo removal keys.

REMOVAL AND INSTALLATION

Climate Control Assembly/heater control unit/

Removal
1. Standard preparatory measures

Make a note of the radio keycode.

Make a note of the preset radio stations.
CAUTION:
Disconnect the battery negative lead.
2. Remove the radio.
3. Note:The control unit for the heating/air conditioning system, all operating knobs and the air distribution operating switch make up one assembly.

Remove the bezel/control unit.

1 Remove the screws on the top of the unit

2 Unclip the clips either side of the unit

Pull the bezel/unit forwards.

Disconnect the plug.
4. Unclip the air distribution shaft.
5. Remove the heater/air conditioning module and the fan operating switch.

Installation
1. Refit the components in the reverse order.
2. Install the radio.
3. Connect the battery ground lead.

Enter the radio keycode.

Reprogramme the preset radio stations.

Reset the clock.

Carry out a road test to enable the PCM to collect data.
4. Check that the heater/air conditioning operates properly.

on Jan 31, 2010 | Ford Focus Cars & Trucks

2 Answers

Ford puma 1998 Drivers and rear footwells filling with water.


There could be a number of places the water could be coming from does the leak start from front and work its way back?
Try the following -

. A faulty seal at the bodywork joints below the reinforcing panel may allow water entry in the area of the side trim panel and bulkhead.
Check the area for faulty sealing. If necessary, seal the bodywork joints with sealer.

start with the easiest.

Jan 20, 2010 | 1989 Ford Probe

1 Answer

How do you take bumper off a ford puma?


Front Bumper (434230)

Removal
1. Remove the radiator grille.
2. Remove the left-hand front wheel.
3. Detach the fender splash shield from the bumper cover and fender (both sides).
4. Remove the air cleaner intake pipe retaining clip.
5. Detach the air cleaner intake pipe from the air cleaner housing.

1 Rotate the pipe clockwise.

2 Detach the pipe.
6. Detach the bumper cover from the fender and support bracket (both sides).
7. Remove the left-hand side bumper retaining nut.
8. Remove the right-hand side bumper retaining nut.
9. Remove the bumper.

Installation
1. To install, reverse the removal procedure.

Jan 01, 2010 | 2007 Ford F

1 Answer

I have my code but it is not accepting it, how do you put it into a ford puma radio


Ford Code Entry Instructions
Once the unit has been turned on the display will show ' CODE - - - -'
Press preset [ 1 ] repeatedly for the first digit
Press preset [ 2 ] repeatedly for the second digit
Press preset [ 3 ] repeatedly for the third digit
Press preset [ 4 ] repeatedly for the third digit

To save the code press the [ 5 ] key to accept.
The set should now operate

Nov 10, 2009 | 1999 Ford Escort

2 Answers

My son's FORD PUMA has a broken speedometer.


Your piece on a similar problem with a speed sensor on the gearbox of a Ford Focus solved te problem. The AA did not have a replacement sensor but advised, you could check your speed using a sat nav.
The dealer who supplied the car, Thrapston Ford, have agreed to supply & fit the part free of charge.

Oct 14, 2009 | 2000 Ford Focus

1 Answer

Re : ford Puma 2000n overheat


piece of the proverbial to change its the same as an escort to do ,parts ?? well depends where you are in the world but any ford dealer can supply one

Sep 18, 2009 | 2000 Ford Focus

1 Answer

I have a ford puma r reg my stereo is askin 4 the code i dont know the stereo serial number so i cant find the code


YOU WILL NEED TO REMOVE RADIO FROM CAR ONCE YOU HAVE DONE THAT YOU WILL SEE SERIAL NO. ON SIDE STARTING WITH M. THEN 6 DIGIT NO. GET THAT & I WILL GET UR CODE NO. FOR U.

Feb 21, 2009 | 1999 Ford Escort

2 Answers

Ford Puma cutting out


sensor ,go to ford garage

Jun 06, 2008 | 1998 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...