Question about Mitsubishi Cars & Trucks

Open Question

I have a 2004 Mitsubishi Endeavor, when cold the power steering squeels and wheel locks up when turning sharp. This is literally only the first start after being off for more than an hour or 2, only on the first sharp turn and after that it turns with no issues.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
warlock61
  • 659 Answers

SOURCE: 2004 Ford F250 Superduty Truck Steering problems

I have had this same problem after thorough checking it ended up being a bad steering box. after replacing the box it was fine

Posted on Nov 22, 2008

Ad
  • 1 Answer

SOURCE: VW Polo 1995 1.3CL, got power steering problem

polo year 1995 6n 1300cc schocking effect while shifting schould i get big service or is the problem in the delco

Posted on Aug 26, 2009

Mike258
  • 1498 Answers

SOURCE: 2004 chev silverado ext cab. No Power steering

Hi Hollings,

You description was very good, I need to ask for a specific.

When you turn to the left, the wheel is stiff like the engine is off or does it turn smoothly but the vehicle doesn't turn or seem to respond.

I'm trying to rule out broken mounts,

Also, if the wheel is all the way to the right, is it difficult turning back to the left the whole way, or half way. See where I'm going.?

Please comment back your findings

Best regards
Mike

Posted on Sep 07, 2009

  • 1 Answer

SOURCE: hard steering 2004 infiniti g35

hello

Posted on Oct 23, 2009

  • 1 Answer

SOURCE: I have a knocking sound in the backend of my 2004 Endeavor.

There are multiple bushings in the rear spindles. I just had to change both driver and pass side rear lower control arm bushings in the girlfriends. They are a mitsu only part and go for about 50 each.

Posted on Dec 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, I have a 2004 Mitsubishi Endeavor and the power mirrors act like they have zero power and also the steering wheel radio controls do not function at all. checked all fuses and no luck. Mirror fuse was...


Try checking power and grounds to the switch. If good replace switch. If no power or ground check for broken wires in door hinge area. As for the radio, I do not believe it is on circuit with the mirrors, Thus a seperate issue. probably the radio itself.

Dec 25, 2014 | 2004 Mitsubishi Endeavor

1 Answer

My key wont turn either way seems to be locked


the steering wheel is in lock position. try to jerk the wheel to the left and at the same time turning your key

Apr 06, 2014 | 2007 Mitsubishi Endeavor

2 Answers

Steering wheel radio controls stop working?


Sounds as though you have lost power through the harness in the steering column. This vehicle uses a part called a clockspring that is mounted below the steering wheel and is the device that the signals are transmitted from the steering wheel controls and also are connected to the SRS (supplemental restraint system) air bag in the steering wheel.
I would check the fuses and be sure that there is not a blown fuse , but if there is not a blown fuse it is probably the clockspring and that repair should be diagnosed and then repaired by a qualified technician.

May 30, 2013 | 2004 Mitsubishi Endeavor

1 Answer

Why does the power steering pump drive belt squeel under load when its cold on 2004 hyundai elantra.


this sounds like the belt is worn and needs replacing.when its damp and cold if the belt is worn it will slip easier under this condition than in warmer weather.also the belt tension may not be proper.if this has a belt adjuster that you can adjust then the tension may need to be tightened.if it has an automatic belt tensioner(one that adjust tension all the time)like a serpintine belt then the tensioner may need to be replaced as the spring that crates the tension do get weak over time.

Feb 08, 2012 | 2004 Hyundai Elantra

1 Answer

Can't get key out of igntion on my 2004 endeavor


Assuming there's no button to press when taking the key out, try rocking the steering wheel to left and right at the same time as trying to remove the key. Sometimes the ignition lock engages at the same time as the steering lock.

Dec 19, 2011 | 2004 Mitsubishi Endeavor

1 Answer

Power steering failure on a 2004 mitsubishi endeavor.hard to turn wheel,is there a belt or other fixable way, owner manual says to bring it into the shop....


1st make a quick check, check fluid level on the pump,make sure the pump is not leaking fluid. check the belt make sure it has no cracks,make sure the belt is not slipping, it shoud not have any oil on it,should be tight. are the pulleys making noise,when the engine is running,does it make more noise when you try to turn. the belt could have stretched. if you jack the front end of your truck, turn engine on and turn power steering left and right with out any problem. if the pump is leaking very little, the lines could have air in them, and the leak would have to be eliminated before getting corrected. and there is the possibility of a bad pump. good luck!

Sep 26, 2011 | 2004 Mitsubishi Endeavor

1 Answer

Mitsubishi endeavor


We had one this past year the cable broke inside the console.we had to replace the cable,id suggest you have a local shop diagnose the problem for you.

Jan 30, 2010 | 2004 Mitsubishi Endeavor

2 Answers

How to change water pump on 04 endeaver. It just started making noise on slow sharp turns. Fluid level is good and belt is not loose.


The noise could thn be coming from the power steering pump, its worth checking before you go for the water pump!

Dec 15, 2009 | 2004 Mitsubishi Endeavor

1 Answer

Power steering noise


Sounds to me that the power steering belt is loose. If it is a 2.4 litre engine it has two serpentine belts. You should replace the belts especially if it was smoking.

Nov 22, 2008 | 2004 Dodge Stratus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...