Question about 2006 Chevrolet Colorado
Need to know how to replace wiper motor on 2006 Chevy colorado
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
First remove the wiper arms.Then remove the screws that hold the black plastic grill, you will see the motor.You will need then to disconnect the wiper arm transmission linkage from the motor, then remove the three bolts holding the motor on, dont't forget to disconnect the electrical connector from the motor.Install in reverse order.Good luck.
Posted on Jul 21, 2009
find where top hose comes from the radiator into the engine block, then drain some of the coolant out and remove hose and thermostat from the block. remember which way the termostat sits in the block and install new one. its always a good idea to flush your cooling system before putting in a new thermostat. if the old one was plugged up, the gunk thats in your system will just plug up the new one in time too. you can get a bottle of radiator flush from most auto parts stores.
Posted on Aug 23, 2009
You didn't list your engine size so please pick the applicable to your motor size:
Removal & Installation 2.8L & 2.9L Engines To Remove:
Posted on Sep 03, 2009
i have a 2006 chevy uplander and i need to change the low beam headlamp how do i do it, also about a month after we had got the van the rear wiper stopped working i haven't checked the fuse yet, but is this a common problem for the uplander, and also the abs light stays on what should i do for that problem, and also when we drive it and then shut it off it does not want to turn on right away.
Posted on May 04, 2010
Look online for the wiper module for this model. This is a common issue to include operation without the switch being activated. Everything is controlled by the module which screws directly on the front of the wiper motor by 3 torx head screws and measures about 4" x 4" and is very easy to install. The motor should be on the firewall. The modules run anywhere between $35 and 65. Let me know if you need anything else.
Posted on Jul 20, 2010
Tips for a great answer:
Jan 04, 2018 | Cars & Trucks
Sep 27, 2014 | 2006 Chevrolet Colorado
Dec 16, 2010 | 2006 Chevrolet Colorado
Sep 13, 2010 | 2006 Chevrolet Colorado
Jul 20, 2010 | 2002 Chevrolet Venture Passanger
Mar 15, 2010 | Chevrolet Astro Cars & Trucks
Dec 27, 2009 | 2006 Chevrolet Colorado
Jul 10, 2017 | 2006 Chevrolet Colorado
188 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: