Question about 1998 Buick LeSabre

Open Question

Change bulbs above license plate 98 buick lesabre

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 8 Answers

SOURCE: I can't get to the license plate bulb in a buick

There should only ne two little screws on the plastic plate for the bulb. just unscrew and gently pull downward till bulb and harness are exposed. this should be a 194 bulb just pull out and replace with a new one.

Posted on Feb 21, 2010

Ad
  • 196 Answers

SOURCE: 2000 Buick Lesabre custom liscense plate bulb

kind of tricky, took me an hour to get it figured out, but you got to opend the trunk and take out the 10 or so 10mm nuts sticking out of the backside of the lid, then the whole solid piece where the lights are on the back will slide off, then you can change the bulbs above the license plate and put it all back together

Posted on Mar 20, 2010

  • 2 Answers

SOURCE: how do you change a light bulb above the license

How do you change a light bulb above the license Problem with the 1989 Buick Park Avenue

Posted on Oct 12, 2010

  • 105 Answers

SOURCE: How do you change 2000 Buick LeSabre license plate

They are inside the plastic back attached to the trunk lid. To remove it there are nuts recessed in the back of the lid that have to be removed. The wiring pretty much keeps the back from falling but you still want to be careful. You need deep recess sockets to get to the nuts.

Posted on Feb 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change license plate bulbs in 2004 buick lesabre custom


  1. Disconnect the tail/back up lamp harness connector from the from the body wiring harness.
  2. Remove the tail/back up lamp assembly from the rear compartment lid.
  3. While supporting the tail/back up lamp assembly, unplug the tail/back up lamp harness grommet from the rear compartment lid and remove the tail/back up lamp from the vehicle.
  4. Remove the license plate lamp bulb from the lamp housing.

Sep 22, 2014 | 2004 Buick LeSabre

1 Answer

How to charge tag light


Vehicles: 2004 Buick LeSabre 3.8L SFI OHV 6-cylinder

From sylvania.com:
License plate light bulbs - 2 compatible tag light bulb types:
(1) 161
(2) 161LL (LL stands for "Long Life")
SYLVANIA Long Life miniature bulbs perform twice as long as any standard miniature bulb. Designed for durability, lower maintenance and greater safety.

These are available online, and also at every auto parts store:
http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_Long-Life-Incandescent-Mini-Bulb-Sylvania_5080167-P_1259_R'GRPLAMPAMS___

Since no maintenance manual covers this, do what mechanics do when maintenance manuals fail - get creative.

Unscrew or pry off the lens cover, pull out the License Plate's Type 161 bulb, and insert a new 161 or 161LL bulb, and replace the cover.

Test your installation by turning the ignition key to the "Accessory" position, which will turn on the running lights and the license plate light.

Dec 05, 2011 | 2004 Buick LeSabre

1 Answer

How do you change a light bulb above the license plate in a 1989 buick park avenue


How do you change a light bulb above the license Problem with the 1989 Buick Park Avenue

Oct 08, 2010 | 1989 Buick Park Avenue

2 Answers

How can I replace the license plate lights?


mcdevito75 here, Just above the license plate in the bumper you should see the light lens, simply remove the 2 screws and change the bulb/bulbs

Jun 18, 2010 | 2002 Buick LeSabre

1 Answer

2000 Buick Lesabre custom liscense plate bulb


kind of tricky, took me an hour to get it figured out, but you got to opend the trunk and take out the 10 or so 10mm nuts sticking out of the backside of the lid, then the whole solid piece where the lights are on the back will slide off, then you can change the bulbs above the license plate and put it all back together

Mar 08, 2010 | 2000 Buick LeSabre

1 Answer

2001 LeSabre - replace rear license light. The rear license plate lights do not light up the license at night. How do you get to them? What size bulb do you need?


kind of tricky, took me an hour to get it figured out, but you got to open the trunk and take out the 10 or so 10mm nuts sticking out of the backside of the lid, then the whole solid piece where the lights are on the back will slide off, then you can change the bulbs above the license plate and put it all back together, im cant remember off hand the bulb size, but your local auto parts store will have that info when you go to buy them

Mar 05, 2010 | 2001 Buick LeSabre

1 Answer

License plate bulbs on 98 Park Avenue


License Plate Lights Removal & Installation 1997 – 2000 To Remove:

License/backup Lamp Assembly


76707d9.gif

  1. Remove the rear compartment lid trim. (if necessary)
  2. Disconnect the license/backup assembly connector from the body harness.
  3. While removing the license/backup lamp assembly from the rear compartment lid, disconnect the harness grommet from the rear compartment lid.
  4. Remove the license lamp housing from the license/backup lamp assembly.
  5. Remove the license lamp bulb from the housing and socket.
To Install:
  1. Install the license lamp bulb into the socket and housing.
  2. Install the license lamp housing onto the license/backup lamp assembly
    • Torque the fastener to 18 in-lb (2 Nm).
  3. While holding the license/backup lamp assembly, install the harness grommet to the rear compartment lid.
  4. Install the license/backup lamp assembly
    • Torque the fasteners to 53 in-lb (6 Nm).
  5. Connect the license/backup assembly connector to the body harness.
  6. Install the rear compartment lid trim. (if necessary)

Jun 30, 2009 | 1998 Buick LeSabre

2 Answers

Rear license plate does not work


My park avenue has star bit screws on both sides of the plate lights right at the top of the license plate holder. I just chaged them last week. I do not know what size the bit was and I am not sure your car is the same. My car looks just like the car in the picture just longer and a little bigger.

Jun 23, 2009 | 1998 Buick LeSabre

1 Answer

I can't get to the license plate bulb in a buick lesabre.....don't want to force the plastic....


There should only ne two little screws on the plastic plate for the bulb. just unscrew and gently pull downward till bulb and harness are exposed. this should be a 194 bulb just pull out and replace with a new one.

Apr 05, 2009 | 1995 Buick LeSabre

Not finding what you are looking for?
1998 Buick LeSabre Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

79847 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...