Question about Cars & Trucks

Open Question

How to remove & replace wing mirror on hyundai getz

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: How do you replace the wing mirror cover ?

hi there the easiest way is to remove the lower black cover 2xscrews then with aplastic spreader locate the 2 tabs that hold black cover to mirror cover and press them in and pull black cover down then with a small pry tool carefully prise mirror glass out and disconect wires this will reveal the small single screw that holds the cover to the mirror unit remove this and the rest should be self explaned hope this helps..

Posted on Nov 17, 2008

  • 29 Answers

SOURCE: Wing mirror replacement Fiesta

on the inside of car remove plastic triangle then you will find 3 screws remove these and refit

Posted on Mar 19, 2009

ghost4548
  • 776 Answers

SOURCE: hyundai getz radio

Here's a pic

5781d0b.jpg
Pops out, then remove 4 screws which mount the audio & instrument panel.7be2186.jpg

Posted on Jun 05, 2009

  • 1986 Answers

SOURCE: how to remove and repalce vw golf wing mirror

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you can remove the bolts securing the mirror to the door.

Posted on Sep 18, 2009

  • 4 Answers

SOURCE: remove a wing mirror cover to fit indicator lens

If you have electric folding mirrors fold them in, if not fold the mirror back against the spring (not easy as it is quite strong). Looking from the front, to the mirror cover side of the spindle on which the mirror pivots if you pull it forward, you will see the end of the main mirror body which has a groove it it. At the end of the groove there is a springclip which can prised up using a flat bladed screwdriver. It is easiest to place the blade under the clip and twist the clip to release it. Once fully released the cover can then be withdrawn. Refitting is the reverse of the above but if the cover does not automatically clip in place you may have to force it back with the screwdriver.

Posted on Nov 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removal of 2008 hyundai getz engine


Watch the video's on Youtube
DIY Part Hyundai Elantra transmission engine swap 1 of 3 Removing the...


It is not an exact match but the procedure is typical.

Jun 28, 2016 | Hyundai Cars & Trucks

1 Answer

How to replace wing mirror


Replacing Wing Mirrors - YouTube

? 4:06
https://www.youtube.com/watch?v=2LAqSfV-swI
May 23, 2010 - Uploaded by Decibel Car
Want to replace your wing mirrors with aftermarket ones ? Had someone in a shopping mall car park break ...
    Remove the screws that hold the mirror and remove it from the door. Attach the new mirror. Reconnect the electrical connector and make sure you test the new mirror before putting the parts back into place. Reverse the entire procedure to reassemble the door trim panel.

    Replace a Broken Side View Mirror ' The Family Handyman

    www.familyhandyman.com/automotive/replace-a-broken...mirror/view-all

Dec 02, 2015 | Cars & Trucks

1 Answer

How to change stop light globe on 2008 hyundai getz


Remove the two 10 mm (head) bolts that hold the stop light. This bolts are between the tail light assembly and the tail gate weatherstrip. You can see them without having to remove anything.

By using a masking tape wrapped flat screwdriver, pry "back" the whole tail light assembly. Once out, you can twist the brake light (or reverse, or turn signal) bulb plug, remove and replace the bulb.

The Getz uses standard two filament brake globes (1/4 turn to install).

May 12, 2014 | 2008 Hyundai Getz 1.6

1 Answer

How to replace hyundai getz clutch


This ia a big jobunless you have mechanical knowledge. I suggest you get a manual and read up before you tackle this job. If you have no experience it would be cost effective to have this job done in a clutch and brake shop

Mar 18, 2013 | Hyundai Getz Cars & Trucks

1 Answer

Replacing wing mirror glass on hyundai getz


The only advise is to check out your Manual,

However here is a Video to change over Mirror glass

Dec 17, 2012 | 2008 Hyundai Getz 1.3

1 Answer

Loose wing mirrow


Check this guide as reference for solve ypur problem; this is one DIY about replace Wing Mirror...
1.- Disconnect your negative battery cable, if your Ford Focus has power side mirrors. If it has manual side mirrors, disconnecting the battery is unnecessary.
2.- Pry off the wing mirror's inside sail panel (shaped like a triangle). Insert a trim panel tool between the door skin and the plastic panel to pry it off.
3.- Carefully pull the sail panel away, minding the wiring if the mirror is power-operated. Unplug the electrical harness and set the panel aside.
4.- Open the door and hold the outside part of the wing mirror steady. Remove the mounting bolt with a socket wrench, and then remove the mirror screw with a Phillips screwdriver (the mirror bolt and screw is visible with the panel removed).
5.- Pull the wing mirror assembly from its mount (from the outside). Insert the replacement mirror assembly in place; tighten the bolt and the screw.
6.- Attach the wiring connection to the replacement mirror. Position the sail panel in place and push it against the door to snap it back on.

Hope helps (remember comment and rated this). TY for using Fixya.

Jun 26, 2010 | 2000 Ford Focus

2 Answers

How to replace the front brake pads on a hyundai getz, 2008 1.4


Instead of explaining in words, here you find the right link to understand the disc barking system & how to relace the worn out pads.The link refers elantra, but the basic remains same for the GETZ.

http://www.cockeyed.com/lessons/brakeshoes/brakeshoes01.shtml

Jun 05, 2010 | 2009 Hyundai Genesis

2 Answers

Hyundai getz radio


Here's a pic

5781d0b.jpg
Pops out, then remove 4 screws which mount the audio & instrument panel.7be2186.jpg

Apr 11, 2009 | 2003 Hyundai Tiburon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...