Question about GMC Sierra 2500HD

Open Question

Power liftgate 2008 chevy tahoe wont open or shut

Makes sound but wont open or shut unless done manual

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2005 Tahoe Rear liftgate will

Doors unlock on 2005 Chevy Taho but the rear hatch won't. It does not even click when you press button. It does not have a key acess. Is there a manuel opener?? Or a fuse. Even the glass hatch will not unlock.

Posted on Sep 16, 2008

dgjtex
  • 405 Answers

SOURCE: 2006 chevy tahoe liftgate won't open when keyless remote unlocks

check fuse first always, then check connections fron rear gate to body.

Posted on Dec 15, 2008

  • 62 Answers

SOURCE: 2003 Saturn Vue rear liftgate won't open

The easy part is you just need the latch for the liftgate. The hard part is getting to it and opening the liftgate to replace the latch. You should be able to pull the liftgate trim off most of the way with the gate closed and try to manually actuate the latch to open the gate. You may have to go so far as breaking the latch from the inside to open the gate and then replace your latch.

Posted on Dec 17, 2008

  • 3 Answers

SOURCE: power liftgate doesn't work

The power liftgate motor is located on the driver side panel directly behind the lift arm. First you will have to take the safety belt bolt out. After you get the plastic piece free from the body you will have to take the bolt out of the arm that connects to the hatch. Make sure you have a big enough torx bit for the bolt that holds the arm to the gate. This will allow you to slide the plastic piece off and out of your way. If you are having trouble getting the plastic piece to come off from around the liftgate arm, try putting the door down, that helped me. The rest should be easy. Hope this info helped you out. 

Posted on Apr 14, 2009

  • 1 Answer

SOURCE: 2008 GMC Acadia manual liftgate

2007 GMC Acadia manual liftgate will not open. Is there a way to bypass the electronic switch to get it open and replace the switch or latch?

Posted on Feb 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tailgate only open 1/3 way than closes 2008 tahoe


Your liftgate has obstruction sensors, if obstruction is detected in the power mode, the liftgate will reverse. Has a sensor on each side of liftgate. I don't know if replacing sensor/s will fix it, but, that would be my first thought. I hate to see you replace anything and it not fix it.
Your owners manual should give you info on lift gate operation. If you want my diagram for lift gate, holler and I'll post it.

Sep 28, 2016 | 2008 Chevrolet Chevrolet Tahoe LTZ

1 Answer

Power lift gate will not operate


You have to pull the inside door panel off an check it out , only way !
  • The lift gate latch release is inoperative/does not operate correctly
  • Circuitry
  • Liftgate release switch (integral to the liftgate release handle)
  • Liftgate release motor (integral to the liftgate latch)
  • Power liftgate module
  • SJB
  • Go To Pinpoint Test F .
Normal Operation The smart junction box (SJB) does not release the liftgate unless the doors have been unlocked electronically or the request is initiated from a remote keyless entry (RKE) transmitter.
The SJB sends a voltage signal to the liftgate release switch (part of the liftgate release handle) through circuit CPL45 (BN). When the switch is activated (the handle is pulled), the signal is routed to ground through circuit GD150 (BK/WH). When the SJB detects a request from the liftgate release switch, the SJB provides voltage through circuit CPL10 (BN/BU) to the liftgate latch release motor (integral to the liftgate latch) (vehicles with a manual liftgate) or the power liftgate module (vehicles equipped with a power liftgate). For vehicles with a manual liftgate, ground for the liftgate latch is provided through circuit GD150 (BK/WH).
DTC B2666 - is an on-demand DTC that sets when the SJB detects a short to ground from the liftgate release switch input circuit.
DTC B273A - is an on-demand DTC that sets when the SJB detects a short to ground from the liftgate latch release output circuit.
DTC B273B - is an on-demand DTC that sets when the SJB detects an open or short to voltage from the liftgate latch release output circuit.
    Possible Causes
  • Circuit CPL45 (BN) open or short to ground
  • Circuit CPL10 (GN/WH) open, short to ground or voltage
  • Circuit GD150 (BK/WH) open
  • Liftgate release switch (integral to the liftgate release handle)
  • Liftgate release motor (integral to the liftgate latch)
  • Power liftgate module
  • SJB
Your best bet is to take it to the dealer !

Nov 04, 2015 | 2008 Ford Expedition Eddie

1 Answer

1996 Chevy Tahoe liftgate not opening


You have likely got broken wires where they come out of the cab and into the liftgate. pull back the rubber and check them at that point.

Mar 27, 2015 | 1996 Chevrolet Tahoe

1 Answer

Liftgate opens by its self? 2008 chevy tahoe LTZ


try unhooking the wires from the locking actuator and see if it still does it if it don't then your actuator is bad

Jan 25, 2014 | 2003 GMC Yukon Denali

1 Answer

I have a chevy traverse 2009. The power tailgate wont stay up on the strut. it was working fine the day before. the gate opens to the fully open position before slipping resulting in the gate closing


It's now a recall item. See below.


NHTSA CAMPAIGN ID Number: 15V415000
Component: STRUCTURE:BODY:HATCHBACK/LIFTGATE
Manufacturer: General Motors LLC
Potential Number of Units Affected: 686287

Year: 2009
Make: Chevrolet
Model: Traverse
Manufactured
from: 2008-07-06
to: 2012-02-29
Recall Date: 2015-06-30
-->
Summary:

General Motors LLC (GM) is recalling certain model year 2008-2012 Buick Enclave vehicles manufactured January 3, 2007, to February 29, 2012, 2009-2012 Chevrolet Traverse vehicles manufactured July 6, 2008, to February 29, 2012, 2007-2012 GMC Acadia vehicles manufactured September 15, 2006, to February 29, 2012, and 2007-2010 Saturn Outlook vehicles manufactured August 17, 2006, to March 18, 2010. The affected vehicles, equipped with the power liftgate option, have gas struts that hold the power liftgate up when open. These struts may prematurely wear and the open liftgate may suddenly fall.

If the open liftgate unexpectedly falls, it may strike a person, increasing their risk of injury.

GM will notify owners, and dealers will update the software for the power liftgate actuator motor control unit so that the motor will prevent the rapid closing of the lift gate, free of charge. Owners were mailed interim notices on August 3, 2015. Owners will receive a second notice when remedy parts become available. Owners may contact Buick customer service at 1-800-521-7300, Chevrolet customer service at 1-800-222-1020, GMC customer service at 1-800-462-8782, and Saturn customer service at 1-800-553-6000. GM's number for this recall is 15240.

Jan 01, 2013 | 2009 Chevrolet Traverse

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...