Question about Cars & Trucks

Open Question

1996 bravo b2600 petrol has timing chain or belt

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Landyman
  • 89 Answers

SOURCE: timing belt/chain

This engine has a timing belt.Once you have removed the engine front cover , turn the engine to the marks as shown in the diagram.Lock the crankshaft in this position with an old reverse light switch from the gearbox by inserting it into the hole under the bell housing (manual transmission).Before removing the belt , loosen 3 bolts on the injector pump after you locked this with a 8.5 mm drill bit.Replace the belt and pull the tensioner to 16 Nm.If you are fitting a whole pulley replacement kit take note of the upgraded spacers and their position.e60a21d.jpgDont forget to tighten the injector pump bolts again after you tensioned the belt and recheck your timing marks.

Posted on Nov 29, 2008

Ad
ewashmidas
  • 362 Answers

SOURCE: Cam Belt on Outlander 2.4 litre Petrol - 2004

The vehicle has a belt and should be changed every 60,000 miles.

Posted on Jan 31, 2009

  • 3 Answers

SOURCE: S-type; timing belt or chain?

2.5 s type 2002 to 2005 have timing chains.

Posted on Jul 19, 2009

  • 881 Answers

SOURCE: Have Mazda bravo B2600 4WD ,has white smoke &

You dont say weather its a petrol or diesel engine as there a slight differance in the answer and if a turbo on a diesel thats even more of a differance, but taking it a petrol .
Well to start with the white smoke Isent smoke its water and after going through the engine it turns into Steam and thats what you see..
Running on 3 clyinders is caused through 1 cylinder isent working as a engine should and has a bad valve or a broken piston ring or more and even a cracked head and gasket letting the water through,,,also the broken ring works like a oil pump as if not firing given you power then it works like a oil pump and pumps it into the cylinder that dosent work only pumping oil into the hot exhaust system while running.CAUSING SMOKE
And if a turbo then could be the turbo bearings worn and pushing oil into the engine and still doing the same as before.
Let me know how you get on. RON

Posted on Nov 17, 2009

  • 365 Answers

SOURCE: i need to set up the camshaft timing marks on a 1994 mazda b2600

its not just the camshaft timing marks you set up, you also have to have the crankshaft timing mark set right to or you may damage your engine
check the internet for the right timing procedure for you model car ok

Posted on Jun 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Mazda Bravo b2600 petrol lag in acceleration, new plugs extractors,flow through cat, new air filter,air flow meter, could it be ecu, or throttle control unit , revs hard goes like a slug.


I would check into your transmission at this point and eliminate that before moving on. To have a shop look at it and diagnose is only 80 bucks or so.

Nov 21, 2016 | Mazda Cars & Trucks

1 Answer

Ford Couirier/Mazda Bravo 1994 2.6 petrol 4x4 B2600 I need to buy new/used ECU (G618) replacement or upgrade for my 4x4 ute I want to know the compatible units i can use and best place to get one.


the ecu has to come out of the
same year and number as the engine and drive line
Ford Courier/Mazda Bravo 1994 2.6 petrol 4x4 B2600
source from
ebay
a 4x4 wrecker
an good auto electrican can referb your original
this is usa but might be a seller some where in australia

edit I added image of a G695
http://www.ebay.com/itm/OEM-91-92-93-MAZDA-B2600i-TRUCK-ENGINE-COMPUTER-CONTROL-MODULE-ECU-G618-18-881A-/1916530508691a07fc2d-2613-4d2f-a996-9a4d38ad626f.jpgford-couirier-mazda-bravo-1994-2-6#sln-36462275-ynwsor2g41t5qaon3uf1gyaf-5-2_2.jpgford-couirier-mazda-bravo-1994-2-6-ynwsor2g41t5qaon3uf1gyaf-5-3.jpg

Sep 11, 2016 | Ford Cars & Trucks

1 Answer

What is Max towing capacity for 99 petrol mazda bravo b2600. Can you tow 1 tonne without electric brakes?


Depends were you are, where I live any trailer with a ladened weight over 750 kgs requires brakes. Then when you do have brakes you are allowed to tow a trailer up to 1.5 times the weight of the tow vehicle.

Apr 23, 2015 | 1999 Mazda B-Series

1 Answer

Does anyone know we're the idle speed/ throttle


if there were one it would be on the throttle body also you can read the data sticker in the engine compartment and it will tell you if there is adjustments

Jun 03, 2013 | Cars & Trucks

1 Answer

1998 mazda bravo ute b2600 petrol- Cannot locate the oil filter to change. Can find the sump and bung. Is it possible this model has no oil filter?


No!!!! The motor has oil filter.Look from the top of the motor.It is right there.Under the manifold.Hope this helps

May 25, 2011 | 1998 Mazda B-Series

1 Answer

I have a mazda bravo 4=4 fu model 1996 it is some times


sounds like u have to heavy of oil in ur box i had the same problem with a brand new 4x4 i bought they put in a lighter oil and it was fine

Jun 14, 2010 | 1988 Mazda B2600 Cab Plus

1 Answer

I need to set up the camshaft timing marks on a 1994 mazda b2600


its not just the camshaft timing marks you set up, you also have to have the crankshaft timing mark set right to or you may damage your engine
check the internet for the right timing procedure for you model car ok

Jun 11, 2010 | 1988 Mazda B2600 Cab Plus

1 Answer

96 brazo oil and mtal in over head cam engin stopped on highway


i have seen some mazda motors having busted cam shafts, so that's the only thing i can think of. if you didn't say behind the throtle body, i would say you have a busted piston but i doubt that's the case here.

Mar 02, 2009 | 1988 Mazda B2600 Cab Plus

1 Answer

I am replacing a cam chain and need to know the settings and best way to do it


The 1.8T is very common in the US. We don't have any diesels here in the A4, but the 1.8T is all over the place.

What exactly do you need to know? You were posting it in the title to your question but it got cut off and I don't know exactly what you're looking for in terms of info for changing the cam chain. If you mean the timing belt, that's a belt, not a chain. I thought that the 1.8T drove both cams off of the belt, unlike the 2.8, where only the exhaust cams are belt-driven by the timing belt, and the intake cams drive off their respective exhaust cams via a chain and tensioner assembly. If you can clarify this, we can proceed.

May 16, 2008 | 1996 Audi A4

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...