Question about Cars & Trucks

1 Answer

Can u fit a power steering pump to a 85 hilux if it doesnt have it

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 8,404 Answers

There is more to power steering than a pump. If you want to install power steering, you need a lot of parts and know-how. What is your plan?

Posted on Nov 05, 2012

  •  Tre brooking
    Tre brooking Nov 05, 2012

    dnt really have one jst wndering really. is it difficult.?

×

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
angelo63
  • 129 Answers

SOURCE: power steering in 85 toyota pickup

it is not very hard long as u buy a kit from the wreckers of the same model car and engine it will all bolt up make sure u ask for all the bolts as well make sure u have plenty of time up yor sleve

good luck

Posted on Dec 21, 2008

  • 507 Answers

SOURCE: squealing noise

hmm, sounds like to me maybe a belt isn't tight enough or you got some anitfreeze on belt and it's slipping. make sure belts are tight, then if that's not working, try spraying some carb cleaner on the belts as the car runs.

Posted on Mar 08, 2009

  • 7 Answers

SOURCE: VAGUE AND WANDERING STEERING ON 1990 HILUX 4 X4

Wandering is usually caused by toe-out. Did the aligner use front wheel drive specifications for this rear wheel drive truck? A front wheel drive toes in when the wheels are pulling the car, but the front wheels on your truck drag back to a toe-out position if steering parts are worn. Try pushing the fronts of the front wheels apart. They should still be at least a 16th of an inch closer in the front than in the rear of the tires.

Posted on Sep 14, 2009

  • 1075 Answers

SOURCE: power steering pump Ford Focus 2006 DIY Manual

its quite quite simple;take your pipes of and block them off reconnect them to new pump and replace pump to in line belts.adrian;;;

Posted on Nov 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How involved is it to replace a power steering pump on a 2007 Explorer 4.0?


Power Steering Pump - 4.0L Special Tool(s) Installer Set, Teflon® Seal
211-D027 (D90P-3517-A) or equivalent Material Item Specification MERCON® V Automatic Transmission Fluid
XT-5-QM (or XT-5-QMC) (US); CXT-5-LM12 (Canada) MERCON® V
Item Part Number Description 1 388898 Teflon® seal 2 - Pressure line-to-pump fitting (part of 3A719) 3 W700839 Power steering pump bolts (3 required) 4 3A674 Power steering pump 5 W503924 Pressure line bracket-to-engine bolt 6 3691 Power steering pump supply hose 7 W503924 Power steering pump supply hose bracket bolt
Removal
NOTICE: While repairing the power steering system, care should be taken to prevent the entry of foreign material or failure of the power steering components may result.

  1. Using a suitable suction device, remove the power steering fluid from the reservoir.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.
  1. Remove the power steering pump pulley. For additional information, refer to Power Steering Pump Pulley - 4.0Lin this section.
  1. Remove the pressure line bracket-to-engine bolt.
  1. Remove the power steering pump supply hose bracket bolt.
  1. Release the power steering pump supply hose clamp and disconnect the hose.
  1. Disconnect the pressure line-to-pump fitting.
    • Remove and discard the Teflon® seal.
  1. Remove the 3 bolts and the power steering pump.
Installation
  1. NOTE:A new Teflon® seal must be installed.Using the Teflon® Seal Installer Set, install a new Teflon® seal to the pressure line fitting.
  1. Position the power steering pump and install the 3 bolts.
    • Tighten to 25 Nm (18 lb-ft).
  1. Connect the pressure line-to-pump fitting.
    • Tighten to 75 Nm (55 lb-ft).
  1. Connect the power steering pump supply hose.
  1. Install the power steering pump supply hose bracket bolt.
    • Tighten to 11 Nm (97 lb-in).
  1. Install the pressure line bracket-to-engine bolt.
    • Tighten to 11 Nm (97 lb-in).
  1. Install the power steering pump pulley. For additional information, refer to Power Steering Pump Pulley - 4.0Lin this section.
  1. Fill the power steering system. For additional information, refer to Section 211-00.

Apr 13, 2016 | Ford Cars & Trucks

1 Answer

How do I adjust the steering box on a '92 Hilux


How To: Adjust Steering Gear Box Play - YouTube

? 1:41
https://www.youtube.com/watch?v=gAD0ugRQNek
Apr 10, 2012 - Uploaded by 612to303
How to Adjust steering gear box play demonstrated on a jeep cherokee steering box.

Steering Box Adjustment /22re/2wd/Power Steering - Toyota Nation ...

www.toyotanation.com > ... > 89-95 Toyota Pickup/Hilux

Feb 11, 2010 - 5 posts - ‎3 authors
89-95 Toyota Pickup/Hilux Discussion forum for the 89-95 Toyota Pickup/Hilux owners. ... Steering boxes don't have an adjustment to remove free play they have ... When there is excessive play in a steering box it may mean ... steering adjustment
3 posts
Mar 30, 2011
Manual steering gear box lube change
6 posts
Jul 6, 2010
sloppy/loose steering
15 posts
Oct 15, 2009
Steering box slack problem.
5 posts
Oct 24, 2006
More results from www.toyotanation.com

Dec 06, 2015 | Cars & Trucks

1 Answer

MY toyota 2.7 hilux pickup power STEERING hard what is promlem


either the drive belt has broken , the fluid has leaked out , the steering pump has stopped working , check these first

Oct 07, 2014 | Cars & Trucks

1 Answer

Hilux 1985


Float is too low. Fuel Pump is not producing, Carb is tuned too lean. Check exhaust for light colored deposits to confirm if it has be doing it for a while.

Oct 24, 2013 | Cars & Trucks

1 Answer

2002 silverado 2500 hd power steering


Check belt tension, it maybe slack.There is a bypass valve fitted on or in the pump check that if nither try the pump it`s self..Good-luck....

Jan 05, 2013 | 2002 Chevrolet Silverado 2500HD

1 Answer

Can i fit a power steering pump to my toyota hilux 3y motor


Yes with all the factory brackets and all the parts from a salvaged donor truck.

Nov 05, 2012 | Cars & Trucks

1 Answer

Does a 1985 toyota hilux have power steering


It depends on the specification when ordered new, Some had power steering some didn't. The only way to be certain is to open the bonnet and look for the pump on the side of the motor with the 2 hoses that run down to the steering rack.

Mar 02, 2012 | 1985 Toyota Pickup

1 Answer

FORD GALAXY 1999 2.3 NO POWER STREEING AFTER REPLACING BELT TENSIONER ONLY. .. FLUID LEVEL OK BELT FITTED CORRECTLY I CAN SEE THE PUMP SPINNING


you make have air in your power steering lines. full steer right and then full steer left this will bleed off the air in the lines.
If this doesnt work it could be a power steering pump failure

Jan 06, 2010 | 2000 Chevrolet Impala

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...