Question about 2005 Honda Odyssey

1 Answer

The light bulbs for the rear license plate are not working on my 2005 honda odessey

Not been working all of a sudden, dont know if is fuse or burnt out lightbulbs

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Expert
  • 43 Answers

Most likely the bulb, they are fused with the parking lights, if ur parking lights work most likely the bulb good luck

Posted on Nov 05, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 77 Answers

SOURCE: '04 honda crv bulb change

Its a 5 Watt light bulb. Just pull it out and take it to the store with you. Just remove the license plate to get to it.

Posted on May 21, 2009

lester482529
  • 226 Answers

SOURCE: Brakes lights not working on 2005 Honda Oddessey.

check your fuse your owners manual will tell you which one to replace

Posted on Jun 06, 2009

  • 26 Answers

SOURCE: 2003 honda crv. how do i remove light bulb cover

you have to go under the bumper and and look behind then look for the back of the lightbalb connection. if you see that. pull on it carefully. if rusted, spray some wd forty on it but make sure you dont get the wires with the wd forty

Posted on Aug 05, 2009

  • 101 Answers

SOURCE: license plate and trunk lights not working

check your ground side of the light circuit

Posted on Oct 13, 2009

  • 10 Answers

SOURCE: How do I replace the license plate bulbs?

The license plate lights are accessed by unscrewing the lens. The backup lightbulbs are accessed with the trunk lid open, behind the cover.

Posted on Jan 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Plate light does not work, but lights are good and sockets seem good


check bulb the number plate light runs on the same circuit as the side lights so if they are working its got to be a bad earth on the plate light

Jan 24, 2016 | Cars & Trucks

1 Answer

My 2005 chevy tahoe 5.3 license plate light went out i replaced bulbs problem still there what is the fuse labeled for that circuit?


Check the brake bulb socket for short , clean replace bulbs , check connector to rear licence plate lights . Also trailer harness for short , all on same fuse circuit .

Jan 23, 2013 | 2000 Chevrolet Blazer

3 Answers

My rear license plate light is out, is there a fuse that I have to replace or reor is it the light bulb? If it is the fuse,where would I find it?


I have a 2003 Deville and both of my license plate bulbs were out. Chances are its not a fuse and you will probably NOT find ghe replacement at a autoparts store. The book used that offers the 'replacement numbers' states a 'PC195' which no one carried because the replacement not only requires you to replace the actual bulb, but the setting as well (actual bulb socket-which is nothing more then a blue plastic piece where the bulb actually seats). Its a horrible design. To replace the bulb you need to gently remove the entire light assembly from each side above the plate. You may have to actually take your license plate off to do this. Once you remove the entire assemble there will be a retainer clip with a harness running into the assembly, just unclip the 2 wire harness - repeat for the other side. CHANCES ARE WHEN YOU GO TO REMOVE THE BULB YOU'LL TAKE IT OUT IN PIECES as it will break up in your hand. The part you just removed you will see a blue dime size fitting that is required for ghe bulb to work - when you get your replacement (most likely from a Cadillac Or GM dealer) you will get the new bulb seating in the connector. The AC DELCO part number is 25085970 and you'll pay about $11 each. Be careful when removing the old bulb and handling as there are 2 metal pieces laid into the assembly and if they pop out you'll be looking for more parts Any questions send me a email: carjockey71@gmail, dont forget DO NOT TOUCH THE NEW BULB and use a little of the common bulb grease. The number on the actual bulb assembly is PC168 as read off the needed 'socket'. Installation is the reverse of removal. Best of luck, Paul.

Apr 13, 2011 | 2005 Cadillac Deville

1 Answer

Tag light is not working. is there a fuse that will get the light turned back on?


The fuse labeled REAR PARK LP 15A in the right instrument panel fuse box powers the rear park lamps, and the tag lamps. If your rear park lamps are working then you most likely need to replace the tag lamps (bulbs). Use the following procedure to replace the lamps.

To Remove:
  1. Remove the two mounting screws from the license plate lamp.
  2. Remove the license plate lamp from the rear bumper fascia.
  3. Remove the license plate lamp socket by turning it counterclockwise.
To Install:
  1. Install the license plate lamp socket by turning it clockwise.
  2. Position the license plate lamp to the rear bumper fascia.
  3. Install the license plate lamp mounting screws.

Feb 17, 2011 | 2004 Chevrolet Impala

1 Answer

I don't have any tail lights brake lights, and turn signals. i dont know what fuse or relay to check or replace, because I dont have a owners manual to cross reference. Oh my vehicle is a 1997 ford...


CHECK ALL LIGHT BULBS IN THE BACK. PROBABLY HAVE A FEW BAD BULBS THAT ARE BURNT OUT COMPLETELY. CHECK LICENSE PLATE LIGHTS ALSO. CHECK FUSES TOO TO MAKE SURE THE TAIL LIGHT FUSE IS GOOD.

Jun 10, 2009 | 1997 Ford Expedition

1 Answer

Brakes lights not working on 2005 Honda Oddessey.


check your fuse your owners manual will tell you which one to replace

Jun 06, 2009 | 2005 Honda Odyssey

Not finding what you are looking for?
2005 Honda Odyssey Logo

428 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...