Question about Acura Integra

2 Answers

I need to know how to change that timing belt on my 91 acura integra. I no nothing about over head cams, so I really need some help.

Posted by on

  • Anonymous Mar 17, 2014

    timing belt broke and car has been cranked over multiple times before this diagnosis my son and I made as to the belt braking was determined.
    what do I do if it is an interference engine? replace head or what?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

First lift the front of the car remove the front driver side tire you would have to remove the plastic gard to acces your damper. remove altenator and other belt , then remove the damper ,the valve cover and the side plastic cover (10 mm bolt) now that you see the timing belt you would have to support the engine (driver side) just insal a wood plank on the jack to no damadge the oil pan .
now if you look on the cams gear it will print
UP on one spoke , turn engine until both cam UP print is up if you look closer to the gear it will have little mark just on the side of the thoot at every 90degre make shure the side mark of each gear alling with the top of the head (were the valve cover gasket apply) then on the bottom gear on the crank it will have a mark on it allign the mark with the arrow on the cassing of the engine (oil pump cassing) remove your old belt by loosing the tensioner (14 mm) instal you new belt make shure the belt is tight before retighting the thensioner bolt . then turn your engine by and (remove spark plug it will be easier) a couple turn recheck if everyting line up and make shure the belt is still tight don't turn the engine with the starter because if you didn't alignt everyting good you could bent the valve just a head up. replace everyting togeter and you have a new timing belt in your car and sorry for my bad speling im a french hope that info help

Posted on Jan 05, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Acura Master
  • 6,674 Answers

Check this link, and if you want picture bigger, click on it. Good Luck.

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800496d9

Posted on Jan 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

91 acura integra start problem


Did you check the timing belt timing? Engines need 3 things to start. Spark, fuel, compression.

Jul 05, 2014 | 1991 Acura Integra Hatchback

1 Answer

91 acura integra leaks in front passenger side


They have a problem with the rubber inserts that help hold the cover to the air ducts. You need to take the wiper arms off and the main cover and check under that. If they are dry rotted or broke you need to replace them, I think theres six or seven of them.

Apr 12, 2010 | 1991 Acura Integra Hatchback

1 Answer

How do i change timing belt on a 1997 Acura Integra LS B18B1


My sincere apologies for the delayed response.
I have only been a free contributor to this site for the last 4-months.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, however I am answering it either way.

Click on the following direct Link. It has several Diagrams you will need for your Timing Belt replacement. Included are the Cover Bolt Locations, Tools Needed and Marks for your specific engine.
You may also want to Print out these Diagrams for future use.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Again my apologies...


http://www.2carpros.com/car_repair_information/year/1997/make/acura/model/integra/1997_acura_integra_timing_belt_diagram_marks.htm

Dec 25, 2009 | 1997 Acura Integra Type R

1 Answer

The timing belt has about 15 teeth stripped off of it and wont turn cams. I am installing a new belt and hoping that no valves are bent, but I think this is an interfearance engine????? I also dont know...


My sincere apologies for the delayed response.
I have only been a free contributor to this site for the last 4-months.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, however I am answering it either way.

Click on the following direct Link. It has several Diagrams you will need for your Timing Belt replacement. Included are the Cover Bolt Locations, Tools Needed and Marks for your specific engine.
You may also want to Print out these Diagrams for future use.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Again my apologies...


http://www.2carpros.com/car_repair_information/year/1998/make/acura/model/integra/1998_acura_integra_timing_belt_diagram_marks.htm

Sep 24, 2009 | 1998 Acura Integra Type R

2 Answers

Opel Corsa timing belt replacement


You need to find the timing marks on both crank and cam pulleys, set it, then take of the belt ane dont let any pulley move! Put on new belt and set the tension of the belt.

Jul 31, 2009 | 2000 Acura Integra

1 Answer

Special bolt on the crankshaft pully on 1990 acura integra


It should be a hex bead bolt. Nothing really special about the. If its a bolt that is torqued then tightened to a specific angle then you need to replace it when doing the work.

Dec 30, 2008 | 1990 Acura Integra Hatchback

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...