Question about Dodge Cars & Trucks
Parts that run with serpentine
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!
Posted on Jan 22, 2010
no you should be able to do it There should be a routing label on the underside of hood or on the radiator support/ Its should not be very hard if you have one already just loosen the Alternator it will slide down get the other one ready look to see the way its routed then slide the new one and tighten up the alternator thats it/ Please rate my response thank you very much
Posted on Jan 31, 2009
There should be a routing diagram under the hood somewhere. But in case it is missing, here is the routing diagram. Same for all engines that year.
Posted on Jan 10, 2010
HI. I have located a good diagram. Kindly follow to assist with the proper routing. Use caution when installing your belt. This is the routing for your engine specs.
Posted on Feb 01, 2010
Click on the following free direct Link. It has the Serpentine Belt Diagram for your 2002 Dodge Caravan 3.3L.
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!
Posted on Apr 01, 2010
Tips for a great answer:
Jul 29, 2015 | 1996 Dodge Dakota
Dec 10, 2011 | 2002 Dodge Grand Caravan
Aug 18, 2011 | 1993 Dodge Dakota
May 08, 2010 | 1997 Dodge Dakota
Sep 08, 2009 | 1989 Dodge Dakota 2WD
Jan 08, 2009 | 1992 Dodge Dakota
395 people viewed this question
Usually answered in minutes!