Question about 2004 Chevrolet Impala

1 Answer

Ignition wont work

You turn the key and it does nothing.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Expert
  • 43 Answers

If ur dash lights come on it may not be in ur ignition but in ur starter or sylinoid, the best place to start would be check ur battery voltage and connections along with the starter connections,if ur un sure u can replace the ignition or have ur starter tested at advanced or autozone for free but starter must be off the vehicle, best of luck

Posted on Nov 05, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ignition will not turn


The key won't turn in the ignition switch? Or when the key is turned nothing happens?

May 31, 2016 | 2002 Cadillac Deville

1 Answer

Key wont turn ignition . tried jiggling tapping with key in and lube nothing seems to work .how do get ignition lock out


Removal of most ignition cylinders requires the key to be able to turn in order to release the cylinder. Has the cylinder been acting up/stiff prior to now. Have you another key to try? Removal of a cylinder that won't turn gets expensive as other components may have to be replaced as damage will usually occur when removing the oroginal cylinder

Jan 20, 2016 | 2008 Kia Rio

1 Answer

1989 dodge truck wont turn over dash lights come on but do nothing was having to turn key hard to start now nothing


Sounds like ignition switch loose or pooched pull and test with screw driver if works check conetor linkage for movement when turning key

Oct 13, 2015 | Dodge Cars & Trucks

1 Answer

2013 Hyundai Elanta will not start, turn key , new battery, nothing, all lights n dash work, could it be the alarm system OEM


If you have a second key, try that one. Sometimes 1 key will unlock, 1 key will start. If not it would be the anti theft or security system disabling the ignition module. Which is why it won't even try to turn over.

Feb 21, 2015 | 2013 Hyundai Elantra

1 Answer

When turn key nothing happens


check connection and wires at battery for damage or corrosion if good check for power to ignition switch if no power check for damaged or shorted wiring if good turn key and check if power going to relays or accessory's at fuse panel if no power switch may be bad

Apr 08, 2014 | 2002 Saturn S-Series

1 Answer

On a 1985 Camry, what is the button above the ignition key used for?


nothing (is nothing cant turn it at all or nothing can get ignition or crank positon)
it's the steering lock, latch?
new cars, dont have it , most older cars do.

if you dont push the button the key will not turn.
so did it turn, ? the key that is turn?

Jan 07, 2014 | Toyota Cars & Trucks

1 Answer

1993 dodge durango V8 It wont turn over, it does nothing when you turn the key,we charged the battery and it is good lights go on and everything else works


neutral safety switch or ignition switch...if dashlites, etc come on when u turn ignition on, prob neutral safety switch...chek brightness of headlights for good all around connections...

Nov 27, 2013 | 1993 Dodge Dakota

1 Answer

IGNITION KEY TURNS ON BUT NOTHING WORKS


sounds like a bad battery or bad cables go to battery(corrosion or just loose]

Mar 26, 2013 | Cars & Trucks

1 Answer

92 plymouth voyager wont start and nothing work the windows wont go down the lock and unlock button does nothing idk what the problem is i had the battery tested and the battery is fine what would cause...


Nothing works? How about the headlights, do they work? If yes, then start checking all fuses in the Power Distribution Center or Box under the hood. If no, then look for a bad maxi-fuse in the PDC, and check for a bad fusible link between the battery and the PDC. The battery positive cable goes to the starter, but a pigtail lead off the positive would go to the PDC, to distribute power to all the various circuits on the car.
When you turn the key to on, does the dash light up? If yes, at least power is getting to, and going through the ignition switch. One could then check for power on the starter solenoid wire when key was held in crank or start position.
If nothing when turning key to on-no dash lights, nothing-then check for an ignition fuse in the PDC. If fuse is good check for power being available at the ignition switch connector. If no power there, check wiring between PDC and the ignition switch-if power is up to the switch, but nothing happens with key on, no dash or warning lights, then could have a bad ignition switch.
It just sounds like a maxi-fuse has blown, or a bad fusible link. Good luck.

Mar 18, 2013 | Cars & Trucks

Not finding what you are looking for?
2004 Chevrolet Impala Logo

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...