Question about 1996 Dodge Intrepid

1 Answer

Rubber bushings on stabilizer bars - 1996 Dodge Intrepid

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Expert
  • 43 Answers

Unsure what the problem is, how to replace, noise, where to purchase?
just let me know. also make model and front or rear

Posted on Nov 05, 2012

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1596 Answers

SOURCE: I've a 2001 grd caravan awd. Attached to the rear

Any Machine Shop Will PRESS it in For you , And Yes you Should Be Able to Purchase it At Dealer For Around 20-30 Bucks. This Is the Rout to Go on this Problem.

Posted on Jul 16, 2009

  • 33 Answers

SOURCE: need to replace tie rod and ball joints - qty of

Go to an auto parts store (Carquest has parts for most cars in stock) and they can help you select the right parts and quantities.

Posted on Nov 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Noise while turning left


Since you have not posted what sort of vehicle you are talking about I can only be general. You can lube all stabilizer bushes by removing brackets and or mounting bolts and applying vasoline or rubber grease. Normal grease is not recommended to rubber bushes as the petroleum content attacks the rubber. Is it front wheel drive? It may be a CV joint. also check top strut bearings. Hope this helps. Not much to go on unfortunately.

Aug 22, 2014 | Cars & Trucks

1 Answer

Stablelizer bar bussings, where are they an what do they look like?


The stabilizer bar bushing are rubber bushing that wrap around the stabilizer bar. The bushings are located where the stabilizer attaches to the body and wheel control arms. A service manual from an auto parts store will provide exact location.

Mar 05, 2011 | 1992 GMC Sierra

3 Answers

Safety says i need sway bar bushings.what and where are these?


the sway bar is a bar that runs acrossed the front of the van from strut to strut. It is bolted to the cradel and then has links that run from the bar to the strut to increase stability. The sway bar bushings are rubber mounts that hold the bar down to the cradel. The bar runs though the mounts one each side where the bar and the cradel meet. If they are wore out you will normally hear a clucking noise from the front end when you hit bumps. To remove and replace them there is two bolts that hold a steel cap on top of them on each side. Remove the cap from both sides then the rubber mounts will have a split in them so you can get them off the bar. To install them is just the reverse of the removal. Good luck! 4 thumbs up is appeciated if this helps.

Dec 30, 2010 | 2002 Dodge Caravan

2 Answers

I have a 98 millenia with front end problems. It makes popping noises while driving on rough roads and some smooth roads. It sounds like the front end about to come out of it. I've already changed the left...


sounds as though the rubber bushings (there are two of them L/R side on the stabilizer bar) could be the issue. When the bushing are loose they allow the stabilizer bar to bump against the steering or rack and pinon.

Sep 14, 2010 | 1998 Mazda Millenia

1 Answer

How to replace a sway bar end links to a 94 intrepid



REMOVAL & INSTALLATION

The rear suspension on LH platform vehicles is a fully independent suspension. A stabilizer bar (also called a sway bar) is mounted in rubber isolator bushings and connects the rear struts through links. Note that the fuel tank must be removed to remove the stabilizer bar.

CAUTION OFF. The fuel system pressure must be relieved before disconnecting any fuel lines. Failure to do so may result in fire and/or personal injury.
  1. Disconnect the negative battery cable. Relieve the fuel system pressure.
  2. Raise and safely support the vehicle.
  3. Remove both rear wheels.

  1. Position a transmission jack under the fuel tank just forward of the crossmember to help support the fuel tank when crossmember is removed.
  2. Remove the four crossmember to frame rail attaching bolts. Remove the fuel tank.
  3. Remove the stabilizer bar to link assembly attaching nuts and remove the bar and isolator bushings as an assembly from the vehicle. Inspect the isolator bushings for damage or excessive wear and replace, if necessary.

To install:
  1. Inspect for broken or distorted retainers and bushings. If bushing replacement is required, replacement bushings can be installed by locating the split in the bushing, prying open and removing the defective bushing from around the stabilizer bar.
  2. Install the stabilizer bar and isolator bushings back into the vehicle as an assembly making sure bar is centered in vehicle so it doesn't contact other suspension components.
  3. Install stabilizer bar attaching link onto stabilizer bar. Install new link to bar attaching nuts and tighten to 70 ft. lbs. (95 Nm).

Replace the sway bar bracket bolt with new after loosening or removing them. Only use original equipment bolts as replacements.
  1. Install the fuel tank back onto the vehicle.
  2. Position the crossmember on frame rails and install four mounting bolts. Tighten attaching bolts to 70 ft. lbs. (95 Nm).
  3. Remove transmission jack from under the fuel tank.
  4. Install the rear wheels and lug nuts. Tighten the lug nuts, in a star pattern sequence, to 95-100 ft. lbs. (129-135 Nm).
  5. Lower the vehicle. Reconnect the negative battery cable.
  6. Pressurize the fuel system and check for leaks.
  7. Check and reset the rear wheel toe to specifications as required.

Jul 03, 2010 | 1994 Dodge Intrepid

1 Answer

Rattling/clattering from suspension on poor roads


check shock absorber mounting support/ must be worn-out/ or stabilizer bar rubber bush / or stabilizer linkage rubber bush/ check tie rod ends balljoints / check lower suspension arms balljoints as well as upper suspension arm balljoints and lastly check strut bar rubber bushes/ all the mentioned parts can be easily seen underneath the car....

Apr 09, 2010 | 2003 Land Rover Range Rover

1 Answer

2002 front stabilizer


do not replace the bar please only if its bend. each bush is held by two bolts! simple task!

Jun 18, 2009 | 2002 Buick LeSabre

1 Answer

Changing 2000 ford focus sway bar stabilizer pin


are you refering to the 5/16" bolt with 4 rubber bushings? 2 on each end? If so, cut them. Everything you need will come in kit. Bolts, bushings and sleeves.

Jun 18, 2009 | 2000 Ford Focus

Not finding what you are looking for?
1996 Dodge Intrepid Logo

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...